[DMA] fuser issue

Hello everyone,

I recently bought a shitty [Only registered and activated users can see links. Click Here To Register...]from ali.

however, i have some issue with it.
1st - Its not stable at all, when i'm playing the fuser randomly stop.
2nd - The refresh rate is very weird, sometimes i'm able to go to 240hz, sometimes i cant go above 144hz.

My setup :
Main PC:
2 monitor (240hz & 75hz 1080p both)
RX6800

Second PC:
Laptop with a rtx 3060 and a 120hz screen

Is there anyone that had issue with this fuser, or does someone know what could cause all thoses issue.

Thank you !

€167.81 for a dichen? Damn, it costs 81€, you paid it more than twice, however
Have you flashed your own edid? If not, try it
If yes, it could be faulty cables

Quote:

Originally Posted by wilvin0 €167.81 for a dichen? Damn, it costs 81€, you paid it more than twice, however Have you flashed your own edid? If not, try it If yes, it could be faulty cables

yes i did flash it, i'll try with different cable
Where can you find a fuser for 80€ ? I didn't saw one that cheap.

Thanks for the help :handsdown:

Quote:

Originally Posted by RaphaelS yes i did flash it, i'll try with different cable Where can you find a fuser for 80€ ? I didn't saw one that cheap. Thanks for the help :handsdown:

On taobao

Quote:

Originally Posted by wilvin0 On taobao

i'll check that thanks.

One last question, is that a problem if the main pc source is at 144hz and the radar pc is at 120hz on the fuser ?

Quote:

Originally Posted by RaphaelS i'll check that thanks. One last question, is that a problem if the main pc source is at 144hz and the radar pc is at 120hz on the fuser ?

Ideally it would be better if you have same res and same refresh rate on both pcs, however, even when i tried one pc at 240hz and other at 60hz it still seemed to work fine. :)

Did some test and all the cable seems good, i played with them on one pc and no issue.
But at soon as i put the 2 pc it start lagging...

Quote:

Originally Posted by RaphaelS Hello everyone, I recently bought a shitty [Only registered and activated users can see links. Click Here To Register...]from ali. however, i have some issue with it. 1st - Its not stable at all, when i'm playing the fuser randomly stop. 2nd - The refresh rate is very weird, sometimes i'm able to go to 240hz, sometimes i cant go above 144hz. My setup : Main PC: 2 monitor (240hz & 75hz 1080p both) RX6800 Second PC: Laptop with a rtx 3060 and a 120hz screen Is there anyone that had issue with this fuser, or does someone know what could cause all thoses issue. Thank you !

You shouldn’t be getting better then 120hz, as that’s the hz of the 2nd screen

Quote:

Originally Posted by Relentless You shouldn’t be getting better then 120hz, as that’s the hz of the 2nd screen

Ok so i am really capped by the framerate of my laptop.

Thats seemed weird because the fuser was acting like a 2nd screen on my laptop and was showing 240hz as an option.

i will trying again and stick to 120hz, thank you

Quote:

Originally Posted by RaphaelS Ok so i am really capped by the framerate of my laptop. Thats seemed weird because the fuser was acting like a 2nd screen on my laptop and was showing 240hz as an option. i will trying again and stick to 120hz, thank you

The fuser won't be limited by the laptops max screen HZ, when a fuser is added into a setup it appears as a new monitor on both pcs. If the 2nd pc can output 240hz over HDMI you will be good. Feel free to DM me to get my discord link too we have many users who can help. As far as the fusing issues while playing: if it goes black when starting games try disabling geforce overlay, seen that fix some issues with Dichen random black screens.

Ok so i managed to fix the issue.
For anyone having similar issue : make sure you're using the correct power cable or at least the correct power outage :wojak:

Did the power cable out of the box not work well for you? If not what kind of cable did you use?

I have an issue where it running fine then looses signal dor 3 sec then returns .. driving me nuts

Quote:

Originally Posted by Dadthatplays I have an issue where it running fine then looses signal dor 3 sec then returns .. driving me nuts

Ensure all your cables are HDMI 2.0 or better and not loose, I assume it just blacks out.

Yes blacks out then returns a few sec later all cables have been. Checked and replaced just in case all 2.1 hdmi