We offer Waroverlay DMA soft for War Thunder
What is DMA? Abbreviated as Direct Memory Access, this is device that plugs in to Pci Express port for memory reading (it also called PciLeech), and in to second computer via USB. So the software can be run on another computer that reads the target memory, can it be detected? - yes, but only DMA Board firmware) How to display overlay on main monitor? needed second device, called Hdmi fuser, that device applying image from second computer monitor to main, ignoring black pixels.
[Only registered and activated users can see links. Click Here To Register...]
Hardware requirements:
1) DMA card (cost from $50 to $250), actually any can be used, they are existing with chip 35t, 75t and 100t, can be found on AliExpress [Only registered and activated users can see links. Click Here To Register...], no matter branding. If you have funds you may take latest one with preflashed firmware, or take cheapest one and reflash by yourself (i dont have guide, there are some on known forum), or buy a firmware flashing from provider you trust.
2) Second computer with USB3.0 port, for graphic overlay software, notebook is recomended, needed to install FTDI(DMA card) driver on it: [Only registered and activated users can see links. Click Here To Register...] (setup executable)
3) Hdmi fuser for overlay applying from second(software) computer monitor to main(game pc) monitor, cost from $50 to $250, AliExpress: [Only registered and activated users can see links. Click Here To Register...]
3a) (OPTIONAL) For Autoaim, can be used KmBox B Pro, KmBoxNet or MAKCU(arduino, [Only registered and activated users can see links. Click Here To Register...]), AliExpress welcome.
Loader:
[Only registered and activated users can see links. Click Here To Register...]
Settings menu can be opened with the mouse cursor by clicking on the “W” button (on game PC) in the upper left corner of the screen.
[Only registered and activated users can see links. Click Here To Register...]
Graphic:
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
Current costs:
10$ - Week (7 days)
30$ - Month (31 days)
Accepted funds: Crypto
Free trial key's available, DM in discord for request
Software uses memory read only
Discord: primeval8950
[Only registered and activated users can see links. Click Here To Register...]
What is DMA? Abbreviated as Direct Memory Access, this is device that plugs in to Pci Express port for memory reading (it also called PciLeech), and in to second computer via USB. So the software can be run on another computer that reads the target memory, can it be detected? - yes, but only DMA Board firmware) How to display overlay on main monitor? needed second device, called Hdmi fuser, that device applying image from second computer monitor to main, ignoring black pixels.
[Only registered and activated users can see links. Click Here To Register...]
Hardware requirements:
1) DMA card (cost from $50 to $250), actually any can be used, they are existing with chip 35t, 75t and 100t, can be found on AliExpress [Only registered and activated users can see links. Click Here To Register...], no matter branding. If you have funds you may take latest one with preflashed firmware, or take cheapest one and reflash by yourself (i dont have guide, there are some on known forum), or buy a firmware flashing from provider you trust.
2) Second computer with USB3.0 port, for graphic overlay software, notebook is recomended, needed to install FTDI(DMA card) driver on it: [Only registered and activated users can see links. Click Here To Register...] (setup executable)
3) Hdmi fuser for overlay applying from second(software) computer monitor to main(game pc) monitor, cost from $50 to $250, AliExpress: [Only registered and activated users can see links. Click Here To Register...]
3a) (OPTIONAL) For Autoaim, can be used KmBox B Pro, KmBoxNet or MAKCU(arduino, [Only registered and activated users can see links. Click Here To Register...]), AliExpress welcome.
| Wo Features: |
| - Autoaim (KmBoxNet, KmBox B Pro, MAKCU) |
| - Prediction marker |
| - Aiming point Head\Neck\Body (ground targets only) |
| - Position marker: 3D box or game style frame |
| - Distance to target, model names (types in different colors) |
| - Damage model - crew and ammon racks |
| - Radar |
| - Aiming at you indicator |
| - Pointers to enemies ouside of screen |
| - For tanks: missile trajectory aim |
| - Bomb aim |
| - Enemy rockets, warning |
Loader:
[Only registered and activated users can see links. Click Here To Register...]
Settings menu can be opened with the mouse cursor by clicking on the “W” button (on game PC) in the upper left corner of the screen.
[Only registered and activated users can see links. Click Here To Register...]
Graphic:
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
Current costs:
10$ - Week (7 days)
30$ - Month (31 days)
Accepted funds: Crypto
Free trial key's available, DM in discord for request
Software uses memory read only
Discord: primeval8950
[Only registered and activated users can see links. Click Here To Register...]