DMA card for EFT and fuser/KBBox

Hi all. I became interested in DMA cheats for EFT and I had questions: Which card should I buy?
I found this [Only registered and activated users can see links. Click Here To Register...]
Please tell me, is the built-in firmware on it good? If not, will there be problems with installing private firmware?
I want ESP and aimbot (not an important option, but desirable)
And also, is fuser required for WH to display on my gaming computer or does it depend on the cheat.
Same question about KBBox

If you want other features besides radar, ESP and Aimbot like unlimited endurance, chams, thermal imaging, etc. you don't need to buy a Fuser or KMbox. The biggest use of Fuser and KMbox is that there is no need to implement ESP and Aimbot by writing to memory.

It is enough to buy a DMA with excellent performance and quality.

Firmware is also important, but currently BE is not strict about firmware detection, you can easily find firmware that can avoid being detected by BE.

If you want a super silky experience, don't miss our ZDMA!

[Only registered and activated users can see links. Click Here To Register...]

Quote:

Originally Posted by Sinkha Hi all. I became interested in DMA cheats for EFT and I had questions: Which card should I buy? I found this [Only registered and activated users can see links. Click Here To Register...] Please tell me, is the built-in firmware on it good? If not, will there be problems with installing private firmware? I want ESP and aimbot (not an important option, but desirable) And also, is fuser required for WH to display on my gaming computer or does it depend on the cheat. Same question about KBBox

This is the one we recommend to new customers: [Only registered and activated users can see links. Click Here To Register...]

Fuser is great since no software runs on your game pc, and its inherently stream safe. Can stream your entire monitor :)

Quote:

Originally Posted by Sinkha Hi all. I became interested in DMA cheats for EFT and I had questions: Which card should I buy? I found this [Only registered and activated users can see links. Click Here To Register...] Please tell me, is the built-in firmware on it good? If not, will there be problems with installing private firmware? I want ESP and aimbot (not an important option, but desirable) And also, is fuser required for WH to display on my gaming computer or does it depend on the cheat. Same question about KBBox

We’ve got dma for $180 and fuser for $220 if needed

I bought a fuser from cyber ammo it overheats after like 2 hours of use. Id stick away from there fuser there support sucks no help with it except "put an external fan next to it" Im not the only person whinging that there fuser stops working as it gets so hot some peoples have burnt out it gets that hot.
They dont offer replacements or refunds Im happy to send it back too them as well.

I have now taken it upon myself to make sure nobody else falls into there trap
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]

Quote:

Originally Posted by Hayds1 I bought a fuser from cyber ammo it overheats after like 2 hours of use. Id stick away from there fuser there support sucks no help with it except "put an external fan next to it" Im not the only person whinging that there fuser stops working as it gets so hot some peoples have burnt out it gets that hot. They dont offer replacements or refunds Im happy to send it back too them as well. I have now taken it upon myself to make sure nobody else falls into there trap [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...]

yeah this fuser is very unstable. mine broke during transport

using a standard dichen fuser now $120

Quote:

Originally Posted by MarshallTM yeah this fuser is very unstable. mine broke during transport using a standard dichen fuser now $120

Where did you buy it from?.

Quote:

Originally Posted by DeprimereShop We’ve got dma for $180 and fuser for $220 if needed

Any more info on the fuser you sell interested

Quote:

Originally Posted by thatonemffin Any more info on the fuser you sell interested

Specifications:

Resolutions Supported:
[+] 1920×1080
[+] 2560×1440
[+] 3840×2160
[+] 2560×1080
[+] 3440×1440

Supported Hz:
[+] 4k @ 60Hz
[+] 2k @ 144hz
[+] 1k @ 240Hz
[+] Latency <3ms

2x HDMI IN
1x HDMI OUT
1x UART
1x DC12V Adapter

Quote:

Originally Posted by DeprimereShop We’ve got dma for $180 and fuser for $220 if needed

Quote:

Originally Posted by DeprimereShop Specifications: Resolutions Supported: [+] 1920×1080 [+] 2560×1440 [+] 3840×2160 [+] 2560×1080 [+] 3440×1440 Supported Hz: [+] 4k @ 60Hz [+] 2k @ 144hz [+] 1k @ 240Hz [+] Latency <3ms 2x HDMI IN 1x HDMI OUT 1x UART 1x DC12V Adapter

Oh nice!!! I don’t think I seen it posted to your shop on the website unless I missed it. Guessing to look into buying would just open a ticket? And what payments are you guys taking for it?

Quote:

Originally Posted by thatonemffin Oh nice!!! I don’t think I seen it posted to your shop on the website unless I missed it. Guessing to look into buying would just open a ticket? And what payments are you guys taking for it?

CashApp, Venmo, Crypto.

If you have $1,000+ spend with DepShop, we accept card.

We can delivery within 3-5 business days.

Open a ticket for more.

DMA Boards:[Only registered and activated users can see links. Click Here To Register...]

Fuser and specs:

Fuser Resolution Support:
[+] 1920×1080 at 60hz, 144hz, 165hz, 240hz
[+] 2560×1080 at 165hz
[+] 2560×1440 at 60hz, 120hz, 144hz
[+] 3440×1440 at 100hz
[+] 3840×2160 at 60hz
Delay: 3.51ms - 4.13ms average

and whats the best software to date?