Q's about DMA

Yep another thread from a rook asking about DMA :facepalm:

Yes I did use the search function and doing so pretty much answered all of my initial questions however I'm just looking for clarification before dropping possibly +$600, only to find out that ill need to invest even more on my initial purchase just to get everything working.

For a standard 1 Monitor / 2 PC set up I would need the following additional components:

- DMA Hardware + FW: [[Question]] Can I mix and match any DMA hardware with any FW, as long as the FW is UD for the game I plan on playing?

- Sub to DMA software for the game

- For ESP data to show on my main monitor I would need a compatible high quality fuser and for aim features I would also need a KM Box, correct?



Somewhat off-topic question: Anyone know of any providers that takes payment through Affirm or Paypal monthly payment plan? That'd be super clutch cuz the funds are tight rn :kekw:

INB4 "my things been ud for x, discord invite"

Not sure on the FW

Need the Sub for the cheese

You don't need a fuser for esp, you only need a fuser to hide esp from viewers

You don't need a KM box (unless the cheese needs it, the few i looked at didn't)

Not sure on the monthly sorry (INB4 you shouldn't cheese if funds are that tight)
Subs are around 70~ monthly afaik

Quote:

Originally Posted by lucifercation You don't need a fuser for esp, you only need a fuser to hide esp from viewers

He does need a fuser, atleast afaik since I havent seen a dma cheat that uses a different method to get an overlay

Quote:

Originally Posted by stikkyr Yep another thread from a rook asking about DMA :facepalm: Yes I did use the search function and doing so pretty much answered all of my initial questions however I'm just looking for clarification before dropping possibly +$600, only to find out that ill need to invest even more on my initial purchase just to get everything working. For a standard 1 Monitor / 2 PC set up I would need the following additional components: - DMA Hardware + FW: [[Question]] Can I mix and match any DMA hardware with any FW, as long as the FW is UD for the game I plan on playing? - Sub to DMA software for the game - For ESP data to show on my main monitor I would need a compatible high quality fuser and for aim features I would also need a KM Box, correct? Somewhat off-topic question: Anyone know of any providers that takes payment through Affirm or Paypal monthly payment plan? That'd be super clutch cuz the funds are tight rn :kekw:

1) Most DMA Hardware will work with any firmware, some stuff (BDE Gladiator, Captain 5th gen??) may be locked to the vendor's firmware though. When in doubt just get a lambda squirrel for ~$159 :) Your firmware should work on any software though. If you want to play on Faceit/Vanguard you may need extra good firmware

2) Yes

3) Most DMA ESP's use fuser ESP to reduce detectability (no game PC overlay to detect). KMBox I haven't seen implemented in Tarkov really since aimbot isnt detected. You may need it for other games

My solution (Lone EFT) does take Paypal for monthly plans!

hope this helps :)

Quote:

Originally Posted by lucifercation INB4 "my things been ud for x, discord invite" Not sure on the FW Need the Sub for the cheese You don't need a fuser for esp, you only need a fuser to hide esp from viewers You don't need a KM box (unless the cheese needs it, the few i looked at didn't) Not sure on the monthly sorry (INB4 you shouldn't cheese if funds are that tight) Subs are around 70~ monthly afaik

Ok funds are not that tight lol what I should've said was something more like "If I have to spend over $600, I'd rather hold off on it and use the resources elsewhere"

Quote:

Originally Posted by Egal He does need a fuser, atleast afaik since I havent seen a dma cheat that uses a different method to get an overlay

Very good to know, much appreciated!

Quote:

Originally Posted by LoneSurvivor88 1) Most DMA Hardware will work with any firmware, some stuff (BDE Gladiator, Captain 5th gen??) may be locked to the vendor's firmware though. When in doubt just get a lambda squirrel for ~$159 :) Your firmware should work on any software though. If you want to play on Faceit/Vanguard you may need extra good firmware 2) Yes 3) Most DMA ESP's use fuser ESP to reduce detectability (no game PC overlay to detect). KMBox I haven't seen implemented in Tarkov really since aimbot isnt detected. You may need it for other games My solution (Lone EFT) does take Paypal for monthly plans! hope this helps :)

Damn if I would've seen this reply I probably wouldve ordered through you guys but I did go with the squirrel +fuser and KMBx from Rangerdma.

Anyone have any experience with doing business with them? (Rangerdma.com)

I guess I should've done more homework before taking the dive but when I noticed they were accepting paypal payments I pretty much pulled the trigger immediately. $100 a month for 6 months + a monthly sub is well within my budget when compared to a single $500-600 upfront purchase.

I'd probably still have my EOD account, if I would've just went this route lol but oh well, sometimes you gotta learn stuff the hard way.

Quote:

Originally Posted by Egal He does need a fuser, atleast afaik since I havent seen a dma cheat that uses a different method to get an overlay

Atomic doesn't need fuser for esp so, now you know.

I've spoken to people who have done both the Parsec/Moonlight and Fuser methods of doing ESP, and the overwhelming consensus is that HDMI Combiners (fuser) perform much better.

Any recommendations which CFW to get for mainly BE/EAC games only?

Quote:

Originally Posted by stikkyr Any recommendations which CFW to get for mainly BE/EAC games only?

For BE/EAC only you have a ton of options, I would say it mostly comes down to which seller has the best price/service.

Something like this would be perfect, other sellers sell this same/very similar card too : [Only registered and activated users can see links. Click Here To Register...]

If you are stateside, I have an unused LeetDMA V2 for $300 shipped to your door if that helps any. Was purchased a month ago and has latest custom firmware. Or if you are looking to pay full price but want to stretch it out, check out ZIP. You get a credit limit and can generate a virtual card to use literally anywhere online and will split it up into 4 equal payments.

Quote:

Originally Posted by LoneSurvivor88 For BE/EAC only you have a ton of options, I would say it mostly comes down to which seller has the best price/service. Something like this would be perfect, other sellers sell this same/very similar card too : [Only registered and activated users can see links. Click Here To Register...]

Do I need to flash the card from Linux?

Documentation here:
[Only registered and activated users can see links. Click Here To Register...]

Asking because I noticed the reference image shows the CLI starting with $ Sudo.

Does this mean I need a linux OS and Windows on my secondary PC? (Linux to successfully flash FW, then Windows 10 to use the chair?)

Is there some type of VM Linux OS that I can run from windows or should I just use a portable Ubuntu (USB bootable)?

Quote:

Originally Posted by stikkyr Do I need to flash the card from Linux? Documentation here: [Only registered and activated users can see links. Click Here To Register...] Asking because I noticed the reference image shows the CLI starting with $ Sudo. Does this mean I need a linux OS and Windows on my secondary PC? (Linux to successfully flash FW, then Windows 10 to use the chair?) Is there some type of VM Linux OS that I can run from windows or should I just use a portable Ubuntu (USB bootable)?

No you can flash the card from Windows too. You may want a pre-flashed card though, it saves some hassle. If you have DMA questions feel free to stop by my discord and open a presale ticket :)

Quote:

Originally Posted by stikkyr Do I need to flash the card from Linux? Documentation here: [Only registered and activated users can see links. Click Here To Register...] Asking because I noticed the reference image shows the CLI starting with $ Sudo. Does this mean I need a linux OS and Windows on my secondary PC? (Linux to successfully flash FW, then Windows 10 to use the chair?) Is there some type of VM Linux OS that I can run from windows or should I just use a portable Ubuntu (USB bootable)?

Hi, our shop offers some dma packages if you are interested in picking one up :). Our cards come preflashed and we also offer flashing assistance. Feel free to add my discord and check out our thread here: [Only registered and activated users can see links. Click Here To Register...]

Hey, I found this dma card on aliexpress for $89 USD. It is listed as a Captain dma 75t v3, which would usally cost around $125 USD. Any thoughts? [Only registered and activated users can see links. Click Here To Register...]

Quote:

Originally Posted by XPG5 Hey, I found this dma card on aliexpress for $89 USD. It is listed as a Captain dma 75t v3, which would usally cost around $125 USD. Any thoughts? [Only registered and activated users can see links. Click Here To Register...]

my friend bought such a captain 75t card of ali, no problems