🔥CSGO DMA🔥 Hardware Cheat WebRadar, Aimbot, Triggerbot, Visual

•︱ESP
Box , Bone, Economy, Name, Predict Flash, HP, Shield, Weapon, Radar Position, Radar Weapon

•︱Aimbot (KMbox B+ / Kernel Mode)
Custom Weapon Config for each weapon.
Recoil Control
Aim FOV
5 Hit Boxes (Head, Neck, Chests, Abdomen, Hip)
Visibility Check (BSP)

•︱Triggerbot
•︱Visibility Check
•︱Throwable Projectile ESP
•︱ESP Arrow
•︱Aim FOV Circle
•︱WebRadar
Available in Classic, Goldmap and Minimalist mode
Webradar can be accessed in any devices within same LAN network
Displays Name, HP, Weapon and has follow rotating mode

ABC CSGO
•︱ESP
Box and HP Bar

•︱WebRadar
Available in Classic, Goldmap and Minimalist mode
Webradar can be accessed in any devices within same LAN network
Displays Name, HP, Weapon and has follow rotating mode

•︱Aimbot
Strength 1-5
AimKey
Lack of RCS, so i dont recommend using. Just triggerbot + visual is enough.

•︱Triggerbot
Triggerkey

•︱Visibility Check
Copies all bsp file of csgo to loader/bsp directory

Note:
•Each HWID Reset will deduct 24 Hours sub time.
•Do not require KMBox to use WebRadar & ESP.
•Aimbot and Triggerbot works only with KMBOX B+ Pro. Hotkeys will only be recognized with KMBOX HID.
•In every new map, press Updata once to update Radar and ESP. (Only need to do once in each new Match, not rounds)

Requirement
•︱PCILeech Compatible DMA Card (C1 Terminator DMA (Recommended), LeetDMA, CaptainDMA etc) with clutch solutions Firmware or C1 Terminator embedded firmware.
•︱A Main PC that runs the game and a 2md PC that runs the software.
•︱All winver 10 supported on 2nd PC.[/COLOR]
•︱DMA is installed in PCIE slot of your main PC, and is connected to your second PC via USB cable.

LeetDMA & C1 Terminator DMA are tested to work in Main PC with ASUS & MSI Motherboard&Asrock personally.
DMA does not work properly in Gigabyte mobo (2021 and newer), works on 2020 or earlier.

Second PC requirement
•︱laptop (minimum 1050ti with semi-decent cpu for good performance)
•︱desktop with ryzen 5600g minimum (no dedicated graphic card required)
Above specs are required for good read/write speed & performance with DMA
Second PC specs will also affect Stream quality if you decide to stream your Main PC to Second PC to play with visuals.
Just use two ethernet Lan cable 1gbps for best-performance streaming quality (1080p, up to 360hz)

*If you do not need ESP, you dont need to stream to second PC to play. You can play entirely on your main PC with radar in mobile/table/2nd pc display. Aimbot, Triggerbot will work.

KMBOX B+ Pro hid device is required for Triggerbot and Aimbot to work. If you do not use them, you can still run without kmbox.

•︱No software is run in your main PC. So it will appear clean from any anticheat.
•︱No ESP is drawn in your main PC display monitor. ESP is drawn on second PC, so anticheat cannot get any screenshot
•︱Our Aimbot doesn't write the memory and no mouse_event_api is called.
KMBOX B+ Pro (Hid Device) uses the memory data copied by DMA to send command to main PC mouse and keyboard.
•︱Just play super LEGIT. If you are legit and no one reports your (5 opponents, or 1 teammate of yours) in high elo matches, you will not be subjected to manual check. No cheat can survive manual check.


Undetectability of DMA?
All DMA boards require firmware in order for it to be recognized in Main PC. Firmware is a category of software embedded in a hardware device, it tells your PC what the hardware piece is.
A good firmware will disguise the DMA as a legitimate PCIE device such as Raid0, wireless card, sound card, capture card etc.
If you are using pooled FW (shared by many boards). and when one of the guy is raging and his fw got banned, everyone else using the same pooled fw will be banned too by that provider.
If you are using custom FW from clutch solutions ($150), you should generally be safe as long as u play legit, with one exception: If your cfw from clutch is from the same batch of pooled fw, for example, your cfw has id of A0010, and A0005 is a pooled FW, A0013 is a pooled FW and there are users raging hard with cheese, and got the A0005 and A0013 fw banned, anticheese devs will assume everyone in between A0005 and A0013 are also DMA cheesers and ban them. So to prevent this, you still have to spend alot of $150 to flash your DMA.

So as long as you do not rage and are not sharing pooled FW in your DMA, your undetectability is guaranteed, provided you play LEGIT, and no memory modification functions are involved.

Also, your DMA software must not modify memory of main PC, else it is also a detection vector, making it not different compared to internal cheese in Main PC. Some DMA cheese provider in escape of tarkov provide alot of memory functions such as auto loot, etc so eventhough the software is run on 2nd pc, it can still be detected if you use these memory changing functions.

the only DMA brand that has integrated/onBoard customizable FW with paddle switch is C1 Terminator. All other DMA brands require flashing or pre-flashed.
C1 Terminator has paddle switch that will allow you to customize the FW and the number of unique firmware ID is 2^64 (18,446,744,073,709,551,616). This means for every change you make on the paddle switch, you get assigned a new unique FW, it is like you flashing with a $150 cfw from clutch solutions everytime you do that.

Also, avoid some providers who provide software-based Aimbots and triggerbots, because they modify the memory and send back to your main PC, there is a detection vector. You have to stick to DMA hardware aimbot based on HID device like KMBOX B+ Pro (to be used with DMA and two PC)

Bundle A $440 + Shipping Fee [Current order will be shipped out only from 10 April onwards]
•︱Z1 Terminator DMA Board Package
•︱1 Month Subscription of ABC CSGO DMA PLUS Software (ESP, AIMBOT, TriggerBot, RADAR)
•︱DMA-HID Controller [KMBOX B+ Pro] (required for AIMBOT, TriggerBOT)

Bundle B $265 + Shipping Fee
•︱NinJa DMA + Ninja Custom Firmware
•︱1 Month Subscription of ABC CSGO PLUS DMA Software (ESP, AIMBOT, TriggerBot, RADAR)
•︱DMA-HID Controller [KMBOX B+ Pro] (required for AIMBOT, TriggerBOT)

Bundle C $295 + Shipping Fee
•︱P1/LeetDMA 2.0 with Terminator Custom Firmware
•︱1 Month Subscription of ABC CSGO PLUS DMA Software (ESP, AIMBOT, TriggerBot, RADAR)
•︱DMA-HID Controller [KMBOX B+ Pro] (required for AIMBOT, TriggerBOT)

Bundle C $105 + Shipping Fee
•︱1 Month Subscription of ABC CSGO PLUS DMA Software (ESP, AIMBOT, TriggerBot, RADAR)
•︱DMA-HID Controller [KMBOX B+ Pro] (required for AIMBOT, TriggerBOT)


Add Ons
•︱Laptop External PCI Express Slot $95
•︱Type USB C PCI-Express to USB 3.2 20Gbps PCI-E Express Expansion Card Adapter $22
•︱Video Synthesizer 1080p 120hz (Play with ESP in main without stream) $170
•︱Clutch's solution Custom Firmware $160

4k 240hz video synthesizer will be available on June 2023 onwards.


Shipping Fee is $20 minimum ~ $40 maximum depending on location, worldwide.
Shipping time: ~5-10 Days depending on location, worldwide.


Disclaimer:
We do not earn from Hardware sale in C1 Terminator DMA Board, CaptainDMA, LeetDMA and KMBOX B+ Pro. We want to bring easy and best price access to all our customers . C1 Terminator DMA is sold in eBay for $500 excl shipping fee. C1 Terminator DMA Package costs $335 (2299 RMB in retail) and KMBOX B+ Pro costs $29 (198 RMB in retail). In Bundle A, $460 = $335 + $29 + $6 (cost to cover conversion loss on exchange rate) + $90 (price of 1 month use of our software).

We added CaptainDMA and LeetDMA both with pooled clutch solution' firmware which cost $190 (1299 rmb) to our bundle deals. Added alot of add ons at retail price. To purchase add ons, you must have bought bundles or have subscribed to our software.

With $20-$40, shipping fee, you are paying at $500 maximum, which is what resellers/scalpers are selling at without the shipping fee.


C1 Terminator DMA with onBoard Customizable Firmware solution
•︱You can customize your own Firmware via onBoard switch paddle.
Total of 2^64 unique combinations of firmware ID (2^64 = 18,446,744,073,709,551,616)
•︱Does not require flashing of firmware.
•︱onBoard customizable Firmware solution is supposed to terminate all currently available DMA boards in market that use FW from Clutch-Solutions.
•︱Max speed of 172MB/s via USB 3.0
•︱Max speed of 275MB/s via PCIE-Express to USB 3.2 (Type-C)

CaptainDMA / LeetDMA
•︱Has On-Board JTAG that allows you to flash custom firmware (from clutch solutions) or any other pcieleech compatible firmwares.
•︱Bundle sold here with CaptainDMA / LeetDMA come with standard pooled clutch solution FW (shared by 10 boards)
•︱Max speed of 172MB/s via USB 3.0
•︱Max speed of 260MB/s via PCIE-Express to USB 3.2 (Type-C)