Step #1 – Raid 0
( Need 2 Drives )
Use a usb and format to fat 32 and install windows media creation tool, select create installation tool for another pc and select usb.
Go to bios and change sata mode from AHCI to Raid.
[Only registered and activated users can see links. Click Here To Register...]
Save changes and reboot
Go to bios again, you should see intel virtualization technology (May be different)
Select your disks and create an array, save your changes and reboot
The ssd serial number should change ( to get the serial number, open cmd and type wmic diskdrive get serial number
Step #2 – Reinstalling & Format Windows
Go to bios and change boot from the usb
Install windows ( reset files and apps )
Recommended that you install windows without signing in (
) or use a different account
Update your drivers first
You can change the volumeid if you want
Step #3 - Clear Bios
Turn off your pc
Unplug your power cord.
Open up your computer and remove the CMOS battery from your motherboard for 5 minutes
Put the CMOS battery back into your computer.
Step #4 - Change Mac Address
Go to cmd and type getmac
Go to device manager
Select Network Adapter -
[Only registered and activated users can see links. Click Here To Register...]
Select the odd one
Go to advanced and network address
Select value and change the mac address ( 12 digits Ex : 1A2B3C4D5E6F )
Make sure that the mac address change
Open cmd and type getmac again
Make sure that you’re mac address changes
If it doesn’t change,try to start with 1AXXXXXXXXXX ( X = Random number and letters )
Step #5 – Renew IP
Open Cmd and type ipconfig /release
Then type ipconfig /renew
To check your ipv4 adress, type ipconfig /all
Step #6 – Change Motherboard UUID And BS ( Might not work for some Mobos ) ( Credit to Atrilla on UC )
Open Cmd and type wmic baseboard get serialnumber
Search Thinkcentre M720 Drivers on google
Click on the first one and select manual update and click on Bios
Click on the downward arrow, you should see a lot of things
Download Usb drive package
[Only registered and activated users can see links. Click Here To Register...]
and put the files on a usb formatted to fat 32
You should see a file named startup.nsh, open it using notepad
Delete all of the text in the file and replace it with
echo -on
goto SPOOFSERIAL
:SPOOFSERIAL
AMIDEEFIx64.efi /BS INSERT-SERIAL-HERE
goto SPOOFUUID
:SPOOFUUID
AMIDEEFIx64.efi /SU PUT 32 DIGITS HERE
goto EXIT
:EXIT
exit
goto END
:END
Change ( Insert Serial here ) to a random 12 or 16 digit ( It depends on the mobo if it is 12 or 16 digits, check the serial number before and see if it is 12 or 16 ).
Go to [Only registered and activated users can see links. Click Here To Register...] and generate a UUID, Change PUT 32 DIGITS HERE the UUID generated without the dash, digits should be 32, delete the dashes.
Save the file ( File > save )
Boot to bios and boot using usb
Check if the serial number changed ( Open Cmd and type wmic baseboard get serialnumber ) compare it with the one before you spoof )
Step #7 – Flash Bios
Type motherboard type in google and click on support and click bios
Download any version and download ( recommended to choose upgrade / downgrade to later see if the bios version changes )
Extract the files to a usb
Go to bios and click m-flash
Choose the usb and bios file
After bios update, sata mode will revert back to AHCI, revert it back to raid
Make sure that the bios version changes
Step #8 – Changing Windows Product ID
Open registry editor
Go to, HKey_Local_Machine\Software\Microsoft\Windows NT\Current Version
You should see ProductId
Double click it and replace the current id with anything you want, make sure it is the same number of digits
NOTES -
Don’t use the same USB you got banned in, you will get ban if you use the same usb
Always check if the serials has changed
Tested on
MSI Z490 Gaming Plus - Intel
Requirements -
AMI Bios
Some AMD cpu is not compatible as vanguard flags some AMD cpu
|
|
Use a usb and format to fat 32 and install windows media creation tool, select create installation tool for another pc and select usb.
Go to bios and change sata mode from AHCI to Raid.
[Only registered and activated users can see links. Click Here To Register...]
Save changes and reboot
Go to bios again, you should see intel virtualization technology (May be different)
Select your disks and create an array, save your changes and reboot
The ssd serial number should change ( to get the serial number, open cmd and type wmic diskdrive get serial number
Step #2 – Reinstalling & Format Windows
Go to bios and change boot from the usb
Install windows ( reset files and apps )
Recommended that you install windows without signing in (
|
|
Update your drivers first
You can change the volumeid if you want
Step #3 - Clear Bios
Turn off your pc
Unplug your power cord.
Open up your computer and remove the CMOS battery from your motherboard for 5 minutes
Put the CMOS battery back into your computer.
|
|
Step #4 - Change Mac Address
Go to cmd and type getmac
Go to device manager
Select Network Adapter -
[Only registered and activated users can see links. Click Here To Register...]
Select the odd one
Go to advanced and network address
Select value and change the mac address ( 12 digits Ex : 1A2B3C4D5E6F )
Make sure that the mac address change
Open cmd and type getmac again
Make sure that you’re mac address changes
If it doesn’t change,try to start with 1AXXXXXXXXXX ( X = Random number and letters )
Step #5 – Renew IP
Open Cmd and type ipconfig /release
Then type ipconfig /renew
To check your ipv4 adress, type ipconfig /all
Step #6 – Change Motherboard UUID And BS ( Might not work for some Mobos ) ( Credit to Atrilla on UC )
Open Cmd and type wmic baseboard get serialnumber
Search Thinkcentre M720 Drivers on google
Click on the first one and select manual update and click on Bios
Click on the downward arrow, you should see a lot of things
Download Usb drive package
[Only registered and activated users can see links. Click Here To Register...]
and put the files on a usb formatted to fat 32
You should see a file named startup.nsh, open it using notepad
Delete all of the text in the file and replace it with
echo -on
goto SPOOFSERIAL
:SPOOFSERIAL
AMIDEEFIx64.efi /BS INSERT-SERIAL-HERE
goto SPOOFUUID
:SPOOFUUID
AMIDEEFIx64.efi /SU PUT 32 DIGITS HERE
goto EXIT
:EXIT
exit
goto END
:END
Change ( Insert Serial here ) to a random 12 or 16 digit ( It depends on the mobo if it is 12 or 16 digits, check the serial number before and see if it is 12 or 16 ).
Go to [Only registered and activated users can see links. Click Here To Register...] and generate a UUID, Change PUT 32 DIGITS HERE the UUID generated without the dash, digits should be 32, delete the dashes.
Save the file ( File > save )
Boot to bios and boot using usb
Check if the serial number changed ( Open Cmd and type wmic baseboard get serialnumber ) compare it with the one before you spoof )
Step #7 – Flash Bios
Type motherboard type in google and click on support and click bios
Download any version and download ( recommended to choose upgrade / downgrade to later see if the bios version changes )
Extract the files to a usb
Go to bios and click m-flash
Choose the usb and bios file
After bios update, sata mode will revert back to AHCI, revert it back to raid
Make sure that the bios version changes
Step #8 – Changing Windows Product ID
Open registry editor
Go to, HKey_Local_Machine\Software\Microsoft\Windows NT\Current Version
You should see ProductId
Double click it and replace the current id with anything you want, make sure it is the same number of digits
NOTES -
Don’t use the same USB you got banned in, you will get ban if you use the same usb
Always check if the serials has changed
Tested on
MSI Z490 Gaming Plus - Intel
Requirements -
AMI Bios
Some AMD cpu is not compatible as vanguard flags some AMD cpu
