[Release] PimpBot

this is my Pimpbot
Warning:
use it at your own risk.
although i tested it a long time
i can't ensure you, that it can't destroy your weapon.
but for me it works great ;)
Detected at Fusion KAL

HowTo:
Start Kalonline in window mode
Login
Start PimpBot
Switch back to you KalWindow
and follow the instructions given in the Kal title
If you set everything right the bot will start.
DONT MOVE THE MOUSE WHILE PIMPING
simply sit back and relaxe

This Bot reduces your pimpcooldown to 0
so it is much faster then normal pimping.
as i have seen some people having problems with my Cheats.exe
i have installed a test, if the memory adress is right.
but you should test it on a low lvl weapon, before you use it on your main weapon ;)

Credits:
DarkGER!
for posting the Pimpcooldown Memory address

something else to say?
post your problems, so i can fix them
and have fun.

Source
as Doofy requested it.

Spoiler

PHP Code:


			
#RequireAdmin
#include <NomadMemory.au3>
#Include <Misc.au3>
SetPrivilege("SeDebugPrivilege", 1)

HotKeySet("{END}","_ende")
$sleep1 =IniRead("config.ini","Pimp","sleep1","500")
$sleep2 =IniRead("config.ini","Pimp","sleep2","500")
$pimpcooldown = IniRead("config.ini","Pimp","pimpcooldown",0x004E9C5F)
$reviCooldown = IniRead("config.ini","Pimp","revision cooldown",0x004E9C86)
$P = 0

$Open = _memoryopen(ProcessExists("engine.exe"))
$cooldown = _MemoryRead($pimpcooldown,$Open,'float')
if $cooldown = 5 Then
    _Memorywrite($pimpcooldown,$Open,-1,'float')
    _Memorywrite($reviCooldown,$open,-1,'float')
EndIf

GUICreate("Pimp Helper",300,50)
GUICtrlCreateLabel("Sleep after Pimp",3,3,90,17)
$ISleep1 = GUICtrlCreateInput($sleep1,93,3,30,17,0x2000)
GUICtrlCreateLabel("Sleep before Pimp",3,23,90,17)
$ISleep2 = GUICtrlCreateInput($sleep2,93,23,30,17,0x2000)
GUICtrlCreateLabel("Number of Pimps",130,3,80,17)
$INumbers = GUICtrlCreateInput("",213,3,30,17,0x2000)
$BPimp = GUICtrlCreateButton("Start Pimp",217,30,80,17)
GUISetState(@SW_SHOW)
While 1 * Sleep(100)
    $msg = GUIGetMsg()
    Switch $msg
        Case -3
            IniWrite("config.ini","Pimp","sleep1",GUICtrlRead($ISleep1))
            IniWrite("config.ini","Pimp","sleep2",GUICtrlRead($ISleep2))
            Exit
        Case $BPimp
            Global $sleep1 = GUICtrlRead($ISleep1)
            Global $sleep2 = GUICtrlRead($ISleep2)
            Global $number = GUICtrlRead($INumbers)
            _Pimp()
    EndSwitch
WEnd

Func _Pimp()
        WinActivate("KalOnline","")
        $hwnd = DllOpen("user32.dll")
        WinSetTitle("KalOnline","","KalOnline - Place your mouse above your weapon and press F6")
        While 1
            if _IsPressed("75",$hwnd) Then
                $weapon = MouseGetPos()
                While _IsPressed("75")
                    sleep(50)
                WEnd
                ExitLoop
            EndIf
        WEnd

        WinSetTitle("[LAST]","","KalOnline - Place your mouse above your Polishing Stone and press F6")
        While 1
            if _IsPressed("75",$hwnd) Then
                $polis = MouseGetPos()
                While _IsPressed("75")
                    sleep(50)
                WEnd
                ExitLoop
            EndIf
        WEnd

        WinSetTitle("[LAST]","","KalOnline - Place your mouse above your Talisman and press F6")
        While 1
            if _IsPressed("75",$hwnd) Then
                $tali = MouseGetPos()
                While _IsPressed("75")
                    sleep(50)
                WEnd
                ExitLoop
            EndIf
        WEnd
        DllClose($hwnd)
        AdlibRegister("_Timer",100)
        Global $b = 0, $c = 0, $d = 0
    For $i = 0 to $number-1
        $c = 0
        $d = 0
        _MouseMove($polis[0],$polis[1],3)
        _MouseMove($weapon[0],$weapon[1],5)
        sleep($sleep2)
        $c = 1
        Send("{Enter}")
        sleep($sleep1)
        $d = 1
        _MouseMove($tali[0],$tali[1],3)
        _MouseMove($weapon[0],$weapon[1],5)
        Sleep($sleep2)
        $c = 2
        Send("{Enter}")
        sleep($sleep1)
        $d = 2
        $b += 1
    Next
    AdlibUnRegister()
    WinSetTitle("[Last]","","KalOnline - Pimping is done")
EndFunc

Func _Timer()
    $milsec= ($number-$b)*2*($sleep1+$sleep2) - $c*$sleep2 - $d*$sleep1
    $stunden = Floor($milsec/3600000000)
    $minuten = Floor(($milsec-$stunden*3600000000)/60000)
    $sec = Floor(($milsec-$stunden*3600000000-$minuten*60000)/1000)
    WinSetTitle("[Last]","",StringFormat("KalOnline - Pimps: %i   Time left: %02i:%02i:%02i",$b,$stunden, $minuten, $sec))
EndFunc

Func _MouseMove($X = 0, $Y = 0,$MOUSEEVENTF = 1,$absolute =1)
    Local $MOUSEEVENTF_ABSOLUTE = 32768
    DllCall("user32.dll", "none", "mouse_event", _
            "long",  $MOUSEEVENTF+ ($absolute*$MOUSEEVENTF_ABSOLUTE), _
            "long",  $X*(65535/@DesktopWidth), _
            "long",  $Y*(65535/@DesktopHeight), _
            "long",  0, _
            "long",  0)
EndFunc

Func _ende ()
    Exit
EndFunc

Update:
-Added a tooltip, showing the pimps
-Added a stop button (End)
-Added revision cooldown

-Added a Countdown timer (sec)
-Only 1 file
-You can choose between slow and fast

-source updated and added comments

-added a GUI to set the sleep times (in Miliseconds)
-press F6 to set the positions of weapon, polis and talis / follow the instructions given in the title
-updated source

MfG Timo264

[Only registered and activated users can see links. Click Here To Register...]

For P-Server only

if one was used Kocp r11 killer him it offered pinch steer or clicken ^^ (has also one, however, nen quite stupid)
only comes as soon as r11 killer in it none is msg punch more ... like w�rs if one
WinWaitActive (\ " KalOnline \ ")
takes away and him order \ " sleep \ " on 5000 or something raises enough zeit around in the Kal window to change.

(translator)

wenn man Kocp r11 killer benutzt w�rde der bot ja die maus steuern bzw. clicken^^ (hab auch einen aber nen ziemlich doofen)
nur kommt sobald r11 killer drin ist ja keine msg box mehr...
wie w�rs wenn man WinWaitActive(\"KalOnline\") wegnimmt und den befehlt \"sleep\" auf 5000 oderso erh�ht
genug zeit um ins Kal window zu wechseln

edit: wenn du den wert vom cooldownbar auf -1 setzt kommt der bar garnichtmehr ;) bei 0 sieht man ihn noch^^