this trainer work only cabal NA global [Only registered and activated users can see links. Click Here To Register...]
update 04/12/2017 new vid: ECA farmer
update V_trainer 1.2.5 (work only cabal NA / cabal.com)
links: [Only registered and activated users can see links. Click Here To Register...]
_add new function: "Stand" > self-locking,char does not move
_update BOT_1.1: auto Changes your skill bar when BM > If BM changes skill bar to F4,no BM changes skill bar to F3
_thêm chức năng: "đứng yên" > tự khóa chân ,không cho char di chyển (dùng để auto fram event trong s2 ft2....nếu ai biết xài macro click chuột)
_nâng cấp auto BOT lên 1.1: tự động chuyển bảng skill khi BM.nếu đang BM sẽ tự chuyển qua bảng F4,không BM sẽ chuyển bảng skill F3
updated 1.2.4 (work only cabal NA /global)
Fixed an unpredictable error, because some ISPs restrict authentication protocol
update new prices vtrainer:
400m alz / 1month ; 1b alz / 3month (server titan NA)
From now on, the trial version is only 10 days old
trainer Updated 26/09/2017 Ver:1.2.3 cabal NA (global) trainer
1.2.3 [Only registered and activated users can see links. Click Here To Register...]
upgrade function list coordinates
in this version you can double click on the list coordinates to jump (no d/c)[/URL]
[Only registered and activated users can see links. Click Here To Register...]
add new function: BM2 hit and auto loot (used for boss hunting)
BM2HIT:
_Applicable for WA/BL/FS/FB/GL
For: WA/BL/FB/GL: up to 4 stages (stages 4 is the highest damge)
For: FS: Change up to 3 stages (stages 3 is the highest damge
For: FA/FG/WIZ: There is only 1 stages
Loot Items:
_checked "use hot key" function and press "F10" ON / OFF auto loot
Recommended for use when having a boss hunt event (Because the speed of pressing the Space key is quite high)
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
_unrar file Vtrainer1.0.rar
_vew all image file in folder
_post You name and HWID code
_After receiving the registration code from me Then paste and register successfully
_NSD & NCT Can not set below 150 For safety reasons.recommend 350+
_killgate: After use to break the door finished,You must turn it off.Otherwise you will not be able to go to warp or do the next task
_coornidate: Used to show the character coordinates,
_use Hotkey: Must checked this function, to use the hotkey F5,F6,F7,F8 for the function return,wallhack,zoom hack,range NPC.
_warphack: Used to jump to warp points on the MAP,Can not move, and can only be used twice per channel
_spamskill: auto spam 3 key 4,5,6 When there are taget (It will not hit If target is human).and auto use HP when HP < xxxx (xxx Entered by you)
_Coornidate X,Y: Use to jump to coordinates as you type,After the jump, can move normally.
Input coordinates must add 2 zeros,If using the coordinates of the cabal map "M".
When using this function,Please do not press anything after click "jump to" Until it's completed.
ty.......
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
links:
updated 1.1 version (all in one)
This bot does not hit people ,only press key skill when taget is a monter.
Contact me to get 10 day trial or buy 400m/month alz server titan NA (global).
trainer Updated 03/09/2017 ver:1.2
Fixed error: all windows 10 And some windows 7 can not be used.
notification:
There are some registered brothers but not usable,will be compensated:
Thank you everyone
For those you have registered: Copy the reg.ini file from the old folder to the newly downloaded and extracted folder
example: (copy reg.ini from vtrainer1.1 to vtrainer1.11)
For those who want to register, please post (or pm) name and HWID, let me create key
example: usser: jasonvn
HWID: 26C69FC914C6CE25
After I have 2 information I can create a registration code
click "get a registration key to see HWID (This is information about computer hardware that has been encrypted by software before displaying,Should be able to post on forum)
very important
NSD ,NCT Will be safe if delay => 350.
_Will automatically blocked if DC 2 times (NCT,NSD will be DC if delay <= 100)
_I have tested many times on this issue.So, to be safe. I do not allow set delay nsd,nct < 150
update 04/12/2017 new vid: ECA farmer
|
|
update V_trainer 1.2.5 (work only cabal NA / cabal.com)
links: [Only registered and activated users can see links. Click Here To Register...]
_add new function: "Stand" > self-locking,char does not move
_update BOT_1.1: auto Changes your skill bar when BM > If BM changes skill bar to F4,no BM changes skill bar to F3
_thêm chức năng: "đứng yên" > tự khóa chân ,không cho char di chyển (dùng để auto fram event trong s2 ft2....nếu ai biết xài macro click chuột)
_nâng cấp auto BOT lên 1.1: tự động chuyển bảng skill khi BM.nếu đang BM sẽ tự chuyển qua bảng F4,không BM sẽ chuyển bảng skill F3
updated 1.2.4 (work only cabal NA /global)
Fixed an unpredictable error, because some ISPs restrict authentication protocol
update new prices vtrainer:
400m alz / 1month ; 1b alz / 3month (server titan NA)
From now on, the trial version is only 10 days old
|
|
trainer Updated 26/09/2017 Ver:1.2.3 cabal NA (global) trainer
1.2.3 [Only registered and activated users can see links. Click Here To Register...]
upgrade function list coordinates
in this version you can double click on the list coordinates to jump (no d/c)[/URL]
[Only registered and activated users can see links. Click Here To Register...]
add new function: BM2 hit and auto loot (used for boss hunting)
BM2HIT:
_Applicable for WA/BL/FS/FB/GL
For: WA/BL/FB/GL: up to 4 stages (stages 4 is the highest damge)
For: FS: Change up to 3 stages (stages 3 is the highest damge
For: FA/FG/WIZ: There is only 1 stages
Loot Items:
_checked "use hot key" function and press "F10" ON / OFF auto loot
Recommended for use when having a boss hunt event (Because the speed of pressing the Space key is quite high)
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
_unrar file Vtrainer1.0.rar
_vew all image file in folder
_post You name and HWID code
_After receiving the registration code from me Then paste and register successfully
_NSD & NCT Can not set below 150 For safety reasons.recommend 350+
_killgate: After use to break the door finished,You must turn it off.Otherwise you will not be able to go to warp or do the next task
_coornidate: Used to show the character coordinates,
_use Hotkey: Must checked this function, to use the hotkey F5,F6,F7,F8 for the function return,wallhack,zoom hack,range NPC.
_warphack: Used to jump to warp points on the MAP,Can not move, and can only be used twice per channel
_spamskill: auto spam 3 key 4,5,6 When there are taget (It will not hit If target is human).and auto use HP when HP < xxxx (xxx Entered by you)
_Coornidate X,Y: Use to jump to coordinates as you type,After the jump, can move normally.
Input coordinates must add 2 zeros,If using the coordinates of the cabal map "M".
When using this function,Please do not press anything after click "jump to" Until it's completed.
ty.......
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
links:
updated 1.1 version (all in one)
This bot does not hit people ,only press key skill when taget is a monter.
Contact me to get 10 day trial or buy 400m/month alz server titan NA (global).
trainer Updated 03/09/2017 ver:1.2
Fixed error: all windows 10 And some windows 7 can not be used.
notification:
There are some registered brothers but not usable,will be compensated:
Thank you everyone
For those you have registered: Copy the reg.ini file from the old folder to the newly downloaded and extracted folder
example: (copy reg.ini from vtrainer1.1 to vtrainer1.11)
For those who want to register, please post (or pm) name and HWID, let me create key
example: usser: jasonvn
HWID: 26C69FC914C6CE25
After I have 2 information I can create a registration code
click "get a registration key to see HWID (This is information about computer hardware that has been encrypted by software before displaying,Should be able to post on forum)
very important
NSD ,NCT Will be safe if delay => 350.
_Will automatically blocked if DC 2 times (NCT,NSD will be DC if delay <= 100)
_I have tested many times on this issue.So, to be safe. I do not allow set delay nsd,nct < 150
