© by Zeus
Well this is just a combination of all the information That i have gathered from this thread and put it into one tutorial. I also added the links for the stuff you need!!
Download the server this server files : Hill's server and Full Servers file.
When u download the server files, extract the full server files on this directory...
"C:/GunBoundServer"
when u did that, extract the hill's server and paste in the GunBoundServer ( Where u extract the full), Replace all.
Well, now u need configure the Config's file.
[GunBoundCenter]
GunBoundDB_Host=127.0.0.1 <-- Ur Ip...
GunBoundDB_User=root
GunBoundDB_Pwd=
GunBoundDB_DB=Gunbound database <- The name of gunbound_DataBase
GunBoundDB_Port=3306
UserDB_Host=127.0.0.1 <- same GunBoundDB
UserDB_User=root <- same GunBoundDB
UserDB_Pwd= <- same GunBoundDB
UserDB_DB=Gunbound database <- same GunBoundDB
UserDB_Port=3306
Accept=192.168.1.97/24;210.220.236.64/26;218.144.20.171;127.0.0.1;211.234.113.0/24
AdminGiftSender=GunBound
AdminGiftMsg=Congratulate for your upgrade!
AdminGiftGrade=16
AdminGiftMale0=98305
AdminGiftMale1=32769
AdminGiftFemale0=65537
AdminGiftFemale1=1
...same thing for setting.txt of 8372 directory
[GunBoundServ]
Port=8360
VersionFirst=0
VersionLast=0
CenterIp=127.0.0.1 <--- Ur ip
CenterPort=8382
AdminDB_Host=127.0.0.1 <-- ur ip
AdminDB_User=root
AdminDB_Pwd=
AdminDB_DB=Gunbound database
AdminDB_Port=3306
BillDB_Host=127.0.0.1 <-- Ur Ip
BillDB_User=root
BillDB_Pwd=
BillDB_DB=Gunbound database
BillDB_Port=3306
GradeLimitFirst=14
GradeLimitLast=19
FuncRestrict=1040399
EventActProp0=70
EventWriteToLog0=1
Log=0
Now when you config the servers files do this!!
First you must have EasyPHP1.8 and Navicat Full. OK install them.
Connect EasyPHP1.8 and config they are service of system (same as Lineage2)
Open Navicat, make new connecttion
Name: Whatever you like!
Host:localhost or 127.0.0.1
User:root
pass: DONT WRITE ANYTHING IN THIS
Then Test connecttion, if succesful you click ok
Now, Make new database name gunbound
Exit Navicat, open cmd:
C:\Gunboundserver\Gunbound International Servers\GIS\8363\GunboundServ2.exe -install
C:\Gunboundserver\Gunbound International Servers\GIS\Center\GunboundCenter2. exe -install (I dont remember sorry, i think this name is right)
(That is my GBServer dir)
OK now is database. Open Database folder (in your server dir). Open appliancesetting.MYD and change it to your cilent.
Copy all of database to this folder
C:\Program Files\EasyPHP1.8\mySql\data\gu nbound
now you have Gunbound Database ( you can open Navicat database gunbound for check)
OK you need account system(but now i it doesn't complete ( I will do with all my heart)
Finish, you open GB-Auto.bat and for it load all of our database, Open GunboundServer. and account server, login server, open GunboundServ2.exe and falnally open gameserver.
This is to connect to your server!!
If you dont know how to connect to server do this:
Open Start->Run: Type Regedit->OK
Go to HKEY_LOCAL_MACHINE->SOFTWARE->SOFTNYX->Gunbound and then, change the IP to your IP (127.0.0.1)
And ur client is puted to ur server.
Good Luck, Enjoy !!
Thnx to Hill, huy9010, Hybr!d, and me Zeus.
- Here the Links.....
· This is the Link for EasyPHP 1.8 [Only registered and activated users can see links. Click Here To Register...]
· This is the link for Navicat 2005 on Windows!! [Only registered and activated users can see links. Click Here To Register...]
· This is the link for The Gunbound Server Files you should be using (Hills One) [Only registered and activated users can see links. Click Here To Register...]
· This is the link for the GunBound Server Files Full (It's needed) [Only registered and activated users can see links. Click Here To Register...]
############
New Server Files
Well this is just a combination of all the information That i have gathered from this thread and put it into one tutorial. I also added the links for the stuff you need!!
Download the server this server files : Hill's server and Full Servers file.
When u download the server files, extract the full server files on this directory...
"C:/GunBoundServer"
when u did that, extract the hill's server and paste in the GunBoundServer ( Where u extract the full), Replace all.
Well, now u need configure the Config's file.
[GunBoundCenter]
GunBoundDB_Host=127.0.0.1 <-- Ur Ip...
GunBoundDB_User=root
GunBoundDB_Pwd=
GunBoundDB_DB=Gunbound database <- The name of gunbound_DataBase
GunBoundDB_Port=3306
UserDB_Host=127.0.0.1 <- same GunBoundDB
UserDB_User=root <- same GunBoundDB
UserDB_Pwd= <- same GunBoundDB
UserDB_DB=Gunbound database <- same GunBoundDB
UserDB_Port=3306
Accept=192.168.1.97/24;210.220.236.64/26;218.144.20.171;127.0.0.1;211.234.113.0/24
AdminGiftSender=GunBound
AdminGiftMsg=Congratulate for your upgrade!
AdminGiftGrade=16
AdminGiftMale0=98305
AdminGiftMale1=32769
AdminGiftFemale0=65537
AdminGiftFemale1=1
...same thing for setting.txt of 8372 directory
[GunBoundServ]
Port=8360
VersionFirst=0
VersionLast=0
CenterIp=127.0.0.1 <--- Ur ip
CenterPort=8382
AdminDB_Host=127.0.0.1 <-- ur ip
AdminDB_User=root
AdminDB_Pwd=
AdminDB_DB=Gunbound database
AdminDB_Port=3306
BillDB_Host=127.0.0.1 <-- Ur Ip
BillDB_User=root
BillDB_Pwd=
BillDB_DB=Gunbound database
BillDB_Port=3306
GradeLimitFirst=14
GradeLimitLast=19
FuncRestrict=1040399
EventActProp0=70
EventWriteToLog0=1
Log=0
Now when you config the servers files do this!!
First you must have EasyPHP1.8 and Navicat Full. OK install them.
Connect EasyPHP1.8 and config they are service of system (same as Lineage2)
Open Navicat, make new connecttion
Name: Whatever you like!
Host:localhost or 127.0.0.1
User:root
pass: DONT WRITE ANYTHING IN THIS
Then Test connecttion, if succesful you click ok
Now, Make new database name gunbound
Exit Navicat, open cmd:
C:\Gunboundserver\Gunbound International Servers\GIS\8363\GunboundServ2.exe -install
C:\Gunboundserver\Gunbound International Servers\GIS\Center\GunboundCenter2. exe -install (I dont remember sorry, i think this name is right)
(That is my GBServer dir)
OK now is database. Open Database folder (in your server dir). Open appliancesetting.MYD and change it to your cilent.
Copy all of database to this folder
C:\Program Files\EasyPHP1.8\mySql\data\gu nbound
now you have Gunbound Database ( you can open Navicat database gunbound for check)
OK you need account system(but now i it doesn't complete ( I will do with all my heart)
Finish, you open GB-Auto.bat and for it load all of our database, Open GunboundServer. and account server, login server, open GunboundServ2.exe and falnally open gameserver.
This is to connect to your server!!
If you dont know how to connect to server do this:
Open Start->Run: Type Regedit->OK
Go to HKEY_LOCAL_MACHINE->SOFTWARE->SOFTNYX->Gunbound and then, change the IP to your IP (127.0.0.1)
And ur client is puted to ur server.
Good Luck, Enjoy !!
Thnx to Hill, huy9010, Hybr!d, and me Zeus.
- Here the Links.....
· This is the Link for EasyPHP 1.8 [Only registered and activated users can see links. Click Here To Register...]
· This is the link for Navicat 2005 on Windows!! [Only registered and activated users can see links. Click Here To Register...]
· This is the link for The Gunbound Server Files you should be using (Hills One) [Only registered and activated users can see links. Click Here To Register...]
· This is the link for the GunBound Server Files Full (It's needed) [Only registered and activated users can see links. Click Here To Register...]
############
New Server Files
Quote:
Originally posted by raphaelwc
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]