Para's Script Library

MoveTo=[x],[y],[z],[Gravity state],[Collision state];
Moves the player to a position, and enables/disables gravity and collision.
_________________________________________

Command=[text];
Sends a string to the Aion chat
_________________________________________

Console=[command];
Uses a console command you find the full list [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

MoveBy=[x],[y],[z];
Moves the player by a distance
_________________________________________

UseID=[itemID/skillID];
Uses a skill or a item
_________________________________________

SmartSkill=[SkillID],[Cooldown],[Cast or Animation time],[Chaintime],[Chargetime];
Uses a skill much smarter, it will care about cooldown, casttime, animationtime and it will automatically continue the chain
_________________________________________

DialogClick=[Data];
Clicks on a certain button on a NPC dialog without experimental mouseclicks. hover above the dialog button you want to click at and press "Delete" with a opened Script Editor to get the relevant Data
_________________________________________

Print=[text];
Prints a certain text on the center of Aion and in the chat
_________________________________________

Mouse=[x],[y],[Left/Right];
Click on a coordinate at aion
_________________________________________

MouseDrag=[x],[y],[Left/Right],[x2],[y2];
Clicks on a coordinate at aion and drags it to coordinate 2 (Aion will be in foreground for 50 milliseconds)
_________________________________________

#SetAsActive
Sets Aion in foreground and sets it as active window
_________________________________________

#DisableScrolling
Disables the livescrolling and highlighting to save some performance
_________________________________________

#EnableScrolling
Re-enables the livescrolling and highlighting
_________________________________________

#SmartSkillPerformance
Disables the check for the highest available skill ID to save some performance
_________________________________________

#SmartSkillNoPerformance
Re-enables the check for the highest available skill ID
_________________________________________

#UseIDPerformance
Increases the speed of any command that uses UseID but might mess up the quickbar
_________________________________________

#UseIDNoPerformance
Uses the default speed at any UseID command
_________________________________________

#ShowLog
Enables logging and makes the logging window visible
_________________________________________

#HideLog
Disables logging and hides the logging window
_________________________________________

#LogAddRound
Adds a round at the logging window
Be sure #ShowLog is active
_________________________________________

#LogAddStuck
Adds a stuck at the logging window
Be sure #ShowLog is active
_________________________________________

#LogAddDeath
Adds a death at the logging window
Be sure #ShowLog is active
_________________________________________

#LogAddKill
Adds a kill at the logging window
Be sure #ShowLog is active
_________________________________________

#QuitAtRound=[Round],[State];
Stops the script at a certain round when state is at False, True will close Aion also.
Be sure #ShowLog is active
_________________________________________

Delay=[time];
Let the script pause (time in milliseconds)
_________________________________________

DelayGlobal=[multiplier];
Multiplies every Delay in the script with some multiplier, for example 2 would make every delay twice as long
_________________________________________

LootChest=[Chestname],[skillname of the loot command];
Take all loot from a chest
_________________________________________

WaitForResponse=[prompt];
Let the script paused until the user hits OK.
"/n" can be used for newline
_________________________________________

Ask=[text];
A small window will popup for 10 seconds asking the user a question, this works like a usual #IF question
_________________________________________

QuestInfo=[QuestID];
Displays some informations about the current status of a Quest, more info [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

LogWrite=[Path],[Text],[State];
Writes text to a file, possible variables within path and Text
%VANILLATOOL, %DAY, %MONTH, %YEAR, %HOUR, %MIN, %SEC, %MSEC, %Line, /n
state can whether be "+" to add text to the file or "r" to rewrite the file
_________________________________________

IniWrite=[Path],[Section],[Key],[Text];
Writes text to a ini file, possible variables within path and Text
%VANILLATOOL, %DAY, %MONTH, %YEAR, %HOUR, %MIN, %SEC, %MSEC, %Line, /n, /.
_________________________________________

IniRead=[Path],[Section],[Key],[Variable];
Reads the value of a ini file into an variable, possible variables within path and Text
%VANILLATOOL, %DAY, %MONTH, %YEAR, %HOUR, %MIN, %SEC, %MSEC
_________________________________________

_IFQuestAtStep=[QuestID],[Step];
Checks if the quest is at a certain step, this works like a usual #IF question, more info [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

_IFQuestAtStatus=[QuestID],[Status];
Checks if the quest is at a certain status, this works like a usual #IF question, more info [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

_IFQuestAtCounter=[QuestID],[Counter];
Checks if the quest is at a certain counter, this works like a usual #IF question, more info [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

Display=[text],[x],[y],[title];
Displays the text at a certain x and y coordinate on your screen, stays displayed even if the script continues
_________________________________________

SolveCaptcha=[X1 Captcha],[Y1 Captcha],[X2 Captcha],[Y2 Captcha],[API Key],[Variable Saveslot];
Solves a captcha with the help of "https://2captcha.com"
The first 2 parameters are the X and Y mouse coordinates of the top left corner of the captcha image
The 3. and 4. parameter are the X and Y mouse coordinates of the bottom right corner of the captcha image
the 5. parameter is your API key you got from [Only registered and activated users can see links. Click Here To Register...]
the 6. parameter is the variable slot where it should save the string you need to enter
_________________________________________

DisplayHex=[text],[x],[y],[title];
Basically the same function as Display but more optimized to display large hex areas, example [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

SessionPushVar=[variable slot];
Pushes a variable into a global area which can accesses from all Script Editors, example [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

SessionGetVar=[variable slot];
Gets a variable from the global area which can accesses from all Script Editors, example [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

ExternalScriptLoad=[path];
This will run a script file, you can use %VANILLATOOL as variable to use the path of vanillatool
_________________________________________

TrayInfo=[text];
Generates a Traytip with some text.
"/n" can be used for newline
_________________________________________

#SkillLevelFast
The _AC system lowers the skill ID by up to 40 to find a skill ID that's available for your level
_________________________________________

#SkillLevelAccurate
The _AC system lowers the skill ID by up to 600 to find a skill ID that's available for your level
_________________________________________

#SkillLevelExtreme
The _AC system lowers the skill ID by up to 1500 to find a skill ID that's available for your level
_________________________________________

#UseGravity
Script is allowed to use Gravity
_________________________________________

#UseNoGravity
Script is not allowed to use Gravity
_________________________________________

#UseCollision
Script is allowed to use Collision
_________________________________________

#UseNoCollision
Script is not allowed to use Collision
_________________________________________

#UseLoop
Script is allowed to use Loop
_________________________________________

#UseNoLoop
Script is not allowed to use Loop
_________________________________________

#NeedResolution=[Width],[Height];
Resizes Aion
_________________________________________

#CheckUISize
Checks if the UI size is 1.00 (only works if aion has 816,638 resolution)
_________________________________________

RequireVersion=[version];
Scripts needs a certain hack version or newer to be executed
_________________________________________

#WaitUntilCraftFinished
Waits until the current craft process is finished.
_________________________________________

#IF=[%VAR],[DATA];
#ELSE
#ENDIF
If question with few possible variables like %TargetName, %Position, %GotTarget, %TargetDistance, %FlightTime, %TargetDead, %FirstTime
_________________________________________

UseSpeed=[value];
Sets the speed to a value (default is 170)
_________________________________________

UseSpeedGlobal=[multiplier];
Multiplies every Speed change in the script with some multiplier, for example 2 would make every UseSpeed twice as slow
_________________________________________

_CheckDailyReset
Works like a IF question, it will check if the daily reset happend.
_________________________________________

_IFSkillActive=[SkillID];
Works like a IF question, it will check if a skill is currently active like mantras or pets
_________________________________________

_IFStigmaAvailable=[ItemID];
Works like a IF question, it will check if a stigma is socketed, requires the itemID of the socketed stigma
_________________________________________

SelectQuestByID=[QuestID];
Selects a Quest at the Questlog
_________________________________________

#UseMiol
summons the pink nyanco loot miol and enables auto loot
_________________________________________

#CheckPAK
Checks if the x_data.pak file exists in the currently loaded lang pack folder
_________________________________________

#EnableSpeech
Allows the usage of "Speech=[text];"
_________________________________________

#DisableSpeech
Disallows the usage of "Speech=[text];"
_________________________________________

Speech=[text];
Uses the Google Translator voice to speech some text, don't spam this command or google might think you're a bot and forced you to enter a captcha, means it will not read the text anymore then
Example [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

#DO=[Timeout];
#UNTIL=[%VAR],[DATA];
Repeats the lines between those lines until the condition is true or it timeouts (same variables as #IF)
_________________________________________

#Regenerate
Rests until HP and MP are full
_________________________________________

MoveSmooth=[x],[y];
Moves smoothly like a player to a location
_________________________________________

#RemoveDebuff
Uses a Greater Healing Potion if the player got a debuff
_________________________________________

CheckScroll=[movementvalue],[ItemID/SkillID];
Uses an ItemID / SkillID if the players Movementspeed value is below the required value
_________________________________________

WaitForKey=[Key or Virtual Keycode],[Mode];
Waits until the key from variable 1 got pressed, mode 0 are keys like "abc" or "123" / mode 1 needs the virtual key code in variable 1
_________________________________________

_IFKey=[Key or Virtual Keycode],[Mode];
checks if the key from variable 1 got pressed, mode 0 are keys like "abc" or "123" / mode 1 needs the virtual key code in variable 1
_________________________________________

SendKey=[text];
Sends a single key or a whole string to the game
_________________________________________

_ClipGet=[Variable save slot];
Saves the text of the clipboard inside of a variable
_________________________________________

_ClipPut=[text];
Puts a text into clipboard
_________________________________________

_GetInventoryItemHandle=[ItemID];
Checks if the inventory contains a certain item and saves informations about this item inside %VarItemID, %VarItemHandle, %VarItemAmount
_________________________________________

_IFInventoryContains=[ItemID],[Count];
Checks if the inventory contains a certain item
_________________________________________

_IFQuestInventoryContains=[ItemID],[Count];
Checks if the quest inventory contains a certain amount of an item
_________________________________________

SellItems=[ARRAY],[X of Sellbutton],[Y of Sellbutton],[Whitelist/Blacklist],[State];
Sells all items of an array if you got them in your inventory at a merchant dialog, if set to Whitelist it sells only items that are declared on the Array, if set to Blacklist it sells all items that are not declared on the Array, if the last argument is set to True it sells the items one by one until the kinah limit is reached or until it's out of sellable items
_________________________________________

ExchangeItems=[ARRAY],[X of Sellbutton],[Y of Sellbutton];
Exchanges all items of an array if you got them in your inventory at a merchant dialog
_________________________________________

SellItemsAtInventory=[ARRAY],[X of Sellbutton],[Y of Sellbutton],[Whitelist/Blacklist],[State];
Sells all items of an array if you got them in your inventory at the inventory sell dialog, if set to Whitelist it sells only items that are declared on the Array, if set to Blacklist it sells all items that are not declared on the Array, if the last argument is set to True it sells the items one by one until the kinah limit is reached or until it's out of sellable items
_________________________________________

#Stick
Chases the target until you loose the target
_________________________________________

#SetArray[1-3]=[text];
Generates a window where the user can declare a array of items, they must be separated by a ","
This array can later be used in IF questions with the %ARRAY[1-3] variable
_________________________________________

_IFFrameVisible=[FrameID];
Checks if a certain frame is currently opened, more info [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

FrameAction=[FrameID],[Access],[New Value];
Opens a Frame, as Access point these variables can be used:
State
XPos
YPos
And as New Value you can use a raw value or for the State Access point you can use
ON
OFF
SHOW
HIDE
more info [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

_SetArray[1-3]=[data,data];
Declares an array of items, they must be separated by a ","
This array can later be used in IF questions with the %ARRAY[1-3] variable
_________________________________________

_EnterPIN=[1|2|3|4|5|6|];
Enters the PIN, digits must be entered like this for a PIN like "123456" you've to enter "1|2|3|4|5|6"
(The Aion client must be visible on the desktop in order to recognize the digits)
_________________________________________

#SetPINTolerance=[1-255];
Declares the image recognition tolerance for the PIN entering
_________________________________________

#UsePIN
Enables the usage of PIN recognition, works only in windowed mode 816,638 resolution
_________________________________________

#SetVar[1-20]=[text];
Generates a inputwindow with some text asking for a value, after that you can use that value anywhere in the script with %Var[1-20]
_________________________________________

_SetVar[1-20]=[data];
Declares a variable, after that you can use that value anywhere in the script with %Var[1-20]
_________________________________________

#SmoothBackground
Smoothes the Aion client in background, no more stuttering, FPS problems etc.
_________________________________________

#UnSmoothBackground
the complete opposite of #SmoothBackground
_________________________________________

_IFBuffAlive=[BuffID];
Checks if a certain buff is currently active at player
_________________________________________

_IFTargetBuffAlive=[BuffID];
Checks if a certain buff is currently active at target
_________________________________________

_IFDebuffAlive=[DebuffID];
Checks if a certain debuff is currently active at player
_________________________________________

_IFTargetDebuffAlive=[DebuffID];
Checks if a certain debuff is currently active at target
_________________________________________

#EnableChatLog
Enables the Chat log
_________________________________________

#ClearChatLog
Clears the Chat log in cache
_________________________________________

_SearchChatLog=[text];
Searches for a text inside the Chatlog
example [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

_GetChatLog=[text],[Variable Save slot];
Searches for a text inside the Chatlog, (RegEx can be used)
_________________________________________

GetCooldown=[Skill/ItemID],[variable save slot];
saves the remaining cooldown of a skill or item into a variable
_________________________________________

_AutoChain
Automatically continues the chain if possible
_________________________________________

_Calc[1-20]=[integer1][+-/*][integer2];
Calculates something and saves it into variables 1-20
_________________________________________

CreateTimer=[ID];
Creates a timer with a ID
You can check this timer with
_________________________________________

DeleteTimer=[ID];
Deletes a timer with a certain ID
_________________________________________

#EXECUTE=[functionname];
Executes a function
You declare a function like this
_________________________________________

#ThreadEXECUTE=[Function],[Inherit Environment State],[Standalone State],[Variable Saveslot for Thread Process ID];;
Starts a function in a new thread, more information [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

_IFProcessAlive=[Process ID];
Checks if a certain process is alive
_________________________________________

ProcessPause=[Process ID],[State];
Pauses / Resumes a certain Process depending on whether the State is True or False
_________________________________________

ProcessKill=[Process ID];
Kills a certain Process
_________________________________________

#SendAction=[mode],[value];;
mostly used to start gliding, more information [Only registered and activated users can see links. Click Here To Register...]
_________________________________________

Memory functions;
You can modify the memory of aion with these commands
MemPtrWrite=[Address],[OFFSET/OFFSET],[VALUE],[TYPE];
MemWrite=[Address],[VALUE],[TYPE];
_IFMemPtrRead=[Address],[OFFSET/OFFSET],[TYPE],[IF VALUE];
_IFMemRead=[Address],[TYPE],[IF VALUE];
_UNTILMemPtrRead=[Address],[OFFSET/OFFSET],[TYPE],[IF VALUE];
_UNTILMemRead=[Address],[TYPE],[IF VALUE];
_MemPtrReadVar=[Address],[OFFSET/OFFSET],[TYPE],[Variable save slot];
_MemReadVar=[Address],[TYPE],[Variable save slot];
_MemPtrPrint=[Address],[OFFSET/OFFSET],[TYPE];
_MemPrint=[Address],[TYPE];
more information [Only registered and activated users can see links. Click Here To Register...]
_MemPattern=[Pattern],[Offset],[Global],[Only Game.dll][custom start/end];
If the last argument is "True" it only scans within Game.dll
If the last argument is "Modules" it scans trough all modules
If the last argument is "Memory" it only scans trough allocated memory
The last argument can also be a address range it should scan like "0x00001000/0x1FFFFFFFF"
more information [Only registered and activated users can see links. Click Here To Register...]

_________________________________________

This command declares which Healing skills the combat should use, the skill order you write is also the order which it tries to execute them

This command declares which Regenerate skills the combat should use, the skill order you write is also the order which it tries to execute them

This command declares which Buff skills the combat should use, the skill order you write is also the order which it tries to execute them

This command declares which Mana recover skills the combat should use, the skill order you write is also the order which it tries to execute them

This command declares which Damage skills the combat should use, the skill order you write is also the order which it tries to execute them

This lets the combat only use the Skill ID from the first argument when we don't have the Buff ID from the second argument

With this command you can give a skill a custom cooldown

With this command you can disable the cooldown detection for a certain skill, the cooldown will then always be set if the bot trys to use the skill, this might be needed for skills that he keeps trying to use although he already did use them
Enter "False" as state

With this command you set at which percentage the healing skills should be used

With this command you set at which percentage the mana recover skills should be used

With this command you set at which HP percentage the regenerate function should care about HP

With this command you set at which Mana percentage the regenerate function should care about Mana

With this command you declare the potion to use
in argument 1 comes the ItemID of the Potion
in argument 2 comes for what the potion is whether
HP/MP
HP
MP
in argument 3 comes at which HP percentage he should use the potion, if you don't need the this argument write -1
in argument 4 comes at which MP percentage he should use the potion, if you don't need the this argument write -1

Normaly the combat engine always checks if the skill we declare is available and in case it's not it checks which skill ID is available for our level, this might bother us in instances with special skills, with this command we can disable the available check for certain skills

Tells the combat engine to use a new cooldown system that is much better but costs some time at the start of the script

Tells the combat engine that a specific skill is a toggleable active skill, in case you use the new cooldown system vanillatool is now able to detect if the buff is activated or not

Tells the combat engine that a specific skill is a free aimable skill, Mode 1 means it aims at the player position, Mode 2 means it aims at the target position

Tells the combat engine that a specific skill is a minion skill, you might also need to add a custom cooldown to this skill ID

Like the overlay AttackRange Plus function this one gives us a extended attackrange while combat, might be useful for mid air fights with melee classes

This command enables NoAnimation usage while combat, it automatically uses the best animation value available

This command enables Transformation scroll usage while combat

This command makes sure the Spirit of Spiritmaster auto attacks the enemy

This command allows to use the bomb items on "Big game/Small game" mobs

This command lets to toon walk up to the mob till he's nearby a certain distance

This command sets the combat timeout, so if the fight takes longer than for example 600 seconds it stop fighting

This command sets the combat timeout when the target receives no damage

This command sets the distance at which he should ignore mobs

With this command you can set if he should switch weapon while fighting, this is needed for the next command

When True this command allows the combat system to attack mobs that have aggro on other players or are already below 100% HP

With this command you can set if he should go back to the position where he started to fight after he killed a mob, it's True by default

With this command we can bind certain skills to a weapon, this is mostly just needed for gunslinger if you add both cannon and pistol skills

With this command we can make a skill rely on whether the SM pet is summoned (True) or not summoned (False)

With this command we can make a skill rely on our race, so "Elyos" or "Asmo"

With this command we can make a skill rely on the target name

With this command we can make a skill rely on a certain amount of DP

With this command we can make a skill rely on whether the target has a debuff or not

With this command we can make a skill rely on how much HP Percent we have, the argument can be for example
>50
<90

With this command we can make a skill rely on how much HP Percent the target has, the argument can be for example
>50
<90

This declares the distance he cycles around the target if you use MidAir combat, default is 1.5 meter

This declares the distance he goes upwards above the target, default is 7.9 meters

This declares after how much milliseconds he does another step in mid air, default is 1500

This command is what actually executes the combat with the settings we made earlier, you can start without any argument at all or you set the first argument to "True" and it will defeat the target from MidAir

Like at the command above the mode describes if we fight from mid air or not, this command selects the nearest target, checks if it's a mob, alive and stuff like that and then it starts the combat, afterwards he does optionally looting

With this command we can set a mob name blacklist for the "_ACCheckMob" command, so all mobs on this list will be ignored

With this command we can set a mob name whitelist for the "_ACCheckMob" command, so only mobs on this list will be fighted

With this command we enable/disable the looting at "_ACCheckMob"

[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]