NEW L2Walker P2P BYPASS METHOD

© by clarkyjack

Ok I got the OOG latest working and without needing a second computer.

First you follw the direction for the ingame version. (I copied the tutorial Clarky just made further up, to a certain point)

STEP 1: install Microsoft Loopback, how to do that is as follows:

1. Click Start, and then click Control Panel.
2. If you are in Classic view, click Switch to Category View under Control Panel in the left pane.
3. Double-click Printers and Other Hardware, and then click Next.
4. Under See Also in the left pane, click Add Hardware,and then click Next.
5. Click Yes, I have already connected the hardware, and then click Next.
6. At the bottom of the list, click Add a new hardware device, and then click Next.
7. Click Install the hardware that I manually select from a list, and then click Next.
8. Click Network adapters, and then click Next.
9. In the Manufacturer box, click Microsoft.
10. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
11. Click Finish.

STEP 2: go into your network connections, one of them should be the microsoft loopback, right click it and select properties. from there select "internet protocol" and then properties. change the settings to

IP: 220.76.12.2
SUBNET: 255.255.255.0

leave the rest blank and apply


STEP 3: Edit your host file:

127.0.0.1 localhost
220.76.12.2 L2authd.Lineage2.com

Quote:

Originally posted by Lowfyr you have to edit your "hosts" file Windows XP = C:\WINDOWS\SYSTEM32\DRIVERS\ET C Windows 2K = C:\WINNT\SYSTEM32\DRIVERS\ETC Win 98\ME = C:\WINDOWS

Use the TCPtunnel that you have always used, same settins work fine.

THEN...

You need a program called WPE PRO. WPE PRO If its not the Pro version it doesn't work on NT based systems.

WPE DOWNLOAD: [Only registered and activated users can see links. Click Here To Register...]


I'm lazy so I'm borrowing an image

First have L2W OOG running, then click target program and select L2W OOG.

[Only registered and activated users can see links. Click Here To Register...]

Double click filter 1 to get the box to enter values
Set all option as this screen shot shows you, but ignore the values.

For Values on the top row 001 - 005 you put

001=00
002=29
003=02
004=00
005=00

Bottom row

+000=00
+001=27
+002=02
+003=00
+004=00

Then click Apply


Now make sure that filer is checked and right above the filer selection area you should see a small on button. Click that.


Then Press the Play button and run OOG L2walker

MAKE SURE YOUR USING 10.4.3

It works great work ive no idea what ur hack method does but it works. Only thing ive noticed is that i can only log in 1 walker from my pc? have i done something wrong or am i limited too this because of the nature of this hack?

I figured it out. Each l2 walker has its own process number so u have too log in one walker, then in wpe pro change the target program, the only problem with this is if u get disconected only 1 will log back in, is it possible too have 3 copies of wpe pro running or have multiple targets set up?

I did everything from top to bottom and it said "Login GameServer Fail". I am wondering if you have to edit the set in the OOG l2walker or not. Is the protocol =551? I dont know what i did wrong...plz help

where can i get 10.4.3

did everything and works fine

but well ncsoft changed the portocol version again i think
after all they been doing it every tuesday in the last few weeks

18:09:37 ÃÀ¡¢ÈÕ·þ´úÀíÒѱä¸ü£¬Çë´ó¼Ò²é¿´Ö÷Ò³¡£10.4.6°æÒѾ*·¢ ²¼,ÇëÈ¥ÏÂÔØÊÔÓÃ.Ö÷Ò³[Only registered and activated users can see links. Click Here To Register...]
18:09:37 Link LoginServer Succeed.
18:09:41 Login LoginServer Succeed.
18:09:46 Link GameServer Succeed.
18:09:56 ->Login GameServer Fail.

hense the hack is working to bypass the p2p now we only need to find new protocol version

regards

the protocol is 551 i belive and i was getting the same errors as you, i just didnt have my proccess targeted properly

Can you please explain this step please,

STEP 3: Edit your host file:

127.0.0.1 localhost
220.76.12.2 L2authd.Lineage2.com

Use the TCPtunnel that you have always used, same settins work fine.



What is my host file? the .ini file that has:


LoginServerIP=
LoginServerPort=2106
ProtocolVersion=540
ServerList=[1]Bartz;[2]Sieghardt;[3]Kain;[4]Lionna;[5]Erica;[6]Gustin;[7]Devianne;[8]Hindemith;[9]Teon;

Is that what we should edit? I'm not sure what the host file is. Thank you

Can anyone confirm, can they log into NA c3 NCSoft Servers on this?

17:42:01 10.4.6°æÒѾ*·¢²¼,ÇëÈ¥ÏÂÔØÊÔÓÃ.ÃÀ¡¢ÈÕ·þ´úÀíÒѱä¸ü£¬ Çë´ó¼Ò²é¿´Ö÷Ò³¡£Ö÷Ò³[Only registered and activated users can see links. Click Here To Register...]
17:42:01 Link LoginServer Succeed.
17:42:07 Login LoginServer Succeed.
17:42:11 Link GameServer Succeed.
17:42:12 ->Login GameServer Fail.


How did we always find the new protocol version over the last 9 months.... Can we not just do the same as we have been?

I got mine to work after receiving the login gameserver fail. What i did was instead of running the OOG l2walker shortcut...i opened the actual OOG l2walker.exe in the folder then i targeted that. I think it works like that...hope this help.

loosis can you please copy your .ini settings here.

these are mine


[DEFAULT]
CountryList=USA
DefaultCountry=0
DefaultServer=4
DefaultCharacter=1
DefaultAccount=**************
DefaultPassWord=************
[USA]
LoginServerIP=220.76.12.2 L2authd.Lineage2.com
LoginServerPort=2106
ProtocolVersion=540
ServerList=[1]Bartz;[2]Sieghardt;[3]Kain;[4]Lionna;[5]Erica;[6]Gustin;[7]Devianne;[8]Hindemith;[9]Teon;
[Japan]

[USA]
LoginServerIP=L2authd.Lineage2.com
LoginServerPort=2106
ProtocolVersion=551
ServerList=[1]Bartz;[2]Sieghardt;[3]Kain;[4]Lionna;[5]Erica;[6]Gustin;[7]Devianne;[8]Hindemith;[9]Teon;
[Japan]

I didnt change anything there.

The main promblem that many are having is they are not pressing the file button on WPE PRO, the new fix works like a dream..

Sorry for the spam , i got clarkeys hack working on version 10.4.7 not 10.4.3

Where can i get 10.4.7 or 10.4.3, PLEASSEE