Client modifications for beginners

Page 1 of 6

08/31/2015 20:02 WhyNot555#1

Hey,
After I found many beginners ask about client modifications, and as a beginner it was a bit hard to understand the old threads with old codes that many of them are little changed, I said it would be good if I put some modifications which is updated and easy to do. So this topic is for beginners.

- I would say that I`m not a programmer and 75% credits goes to those of ollydbg&co thread and 10% to other posts, I just collected, updated & added the most needed modifications to be easier to be found hoping to be useful for beginners.

- Don`t consider addresses, they mostly will be changed with new patches, so concentrate on codes.

- If you found it useful, don`t forget to press thanks xD

-So lets start: The program used is ollydbg 1.10 [Only registered and activated users can see links. Click Here To Register...] , Run as admin... Then drag conquer.exe to ollydbg or click on file then open and choose the conquer.exe you wanna modify . Please make sure it is written CPU-main thread, module conquer. [Only registered and activated users can see links. Click Here To Register...]
If not, then right click on the CPU window >> view >> Module 'GameData' >> right click again >> view >> Module 'Conquer'
-Note: Use conquer.exe that lies inside the full conquer online 2.0 folder, many dll files are needed for the debugging process.

1- Fps unlocking:-
in ollydbg
Serach for >> all intermodular calls >> type Sleep and double click on it >> you will find

Code:

0061346E  /$ E8 F9010500    CALL <JMP.&WINMM.timeGetTime>
00613473  |. 8B0D D4C7A400  MOV ECX,DWORD PTR DS:[A4C7D4]
00613479     8D51 19        LEA EDX,DWORD PTR DS:[ECX+19]
0061347C  |. 3BC2           CMP EAX,EDX
0061347E  |. 73 0E          JNB SHORT Conquer.0061348E
00613480  |. 2BC8           SUB ECX,EAX
00613482     83C1 19        ADD ECX,19
00613485  |. 51             PUSH ECX                                 ; /Timeout
00613486  |. FF15 A4619000  CALL DWORD PTR DS:[<&KERNEL32.Sleep>]    ; \Sleep
0061348C  |. EB 1A          JMP SHORT Conquer.006134A8
0061348E  |> 8B0D 04C7A400  MOV ECX,DWORD PTR DS:[A4C704]

Change JNB to JMP

2-Far Jump:-
Ctrl+f >> type PUSH 186c0 >> click Find
at the 9th line above you will find something like CMP EAX,10 .
Select 18 line starting with CMP EAX,10 and ending with JMP Conquer... then
right click >> Binary.. >> Fill with NOP`s.

Code:

0069EAF1  |. 83F8 10        CMP EAX,10
0069EAF4  |. 7E 34          JLE SHORT Conquer.0069EB2A
0069EAF6  |. FF15 A8609000  CALL DWORD PTR DS:[<&GraphicData.GameDat>;  GraphicD.GameDataSetQuery
0069EAFC  |. 8BF0           MOV ESI,EAX
0069EAFE  |. E8 A4D1D6FF    CALL Conquer.0040BCA7
0069EB03  |. 57             PUSH EDI
0069EB04  |. 57             PUSH EDI
0069EB05  |. 68 0000FFFF    PUSH FFFF0000
0069EB0A  |. 68 D5070000    PUSH 7D5
0069EB0F  |. 68 C0860100    PUSH 186C0
0069EB14  |> 8BD8           MOV EBX,EAX
0069EB16  |. 8B06           MOV EAX,DWORD PTR DS:[ESI]
0069EB18  |. 8BCE           MOV ECX,ESI
0069EB1A  |. FF50 3C        CALL DWORD PTR DS:[EAX+3C]
0069EB1D  |. 50             PUSH EAX
0069EB1E  |. 8BCB           MOV ECX,EBX
0069EB20  |. E8 0130F8FF    CALL Conquer.00621B26
0069EB25  |. E9 C0010000    JMP Conquer.0069ECEA

Note: Use wall jump with far jump not to get client crash whenever you press on high point as walls.

2-wall Jump:-
Not for guild area wall
in olly
ctrl+f PUSH 186B6
should get you something like

Code:

0069EE7A     75 23          JNZ SHORT Conquer.0069EE9F
0069EE7C   . FF15 A8609000  CALL DWORD PTR DS:[<&GraphicData.GameDat>;  GraphicD.GameDataSetQuery
0069EE82   . 8BF0           MOV ESI,EAX
0069EE84   . E8 ABCDD6FF    CALL Conquer.0040BC34
0069EE89   . 57             PUSH EDI
0069EE8A   . 57             PUSH EDI
0069EE8B   . 68 0000FFFF    PUSH FFFF0000
0069EE90   . 68 D5070000    PUSH 7D5
0069EE95   . 68 B6860100    PUSH 186B6
0069EE9A   .^E9 4DFFFFFF    JMP Conquer.0069EDEC
0069EE9F   > E8 2ECED6FF    CALL Conquer.0040BCD2
0069EEA4   . 53             PUSH EBX

At this line :

Code:

0069EE7A     75 23          JNZ SHORT Conquer.0069EE9F

change JNZ to JMP and press assemble

4-Enabling PM commands :-
-Search for all referenced text strings >> PM >> Ctrl+L to find next till you find the 1st "[PM]" >> press enter >>
-You will find;

Code:

00686A73  |. 68 B0B49600    PUSH Conquer.0096B4B0                    ;  ASCII "[GM]"
00686A78  |. 8D7E FC        LEA EDI,DWORD PTR DS:[ESI-4]
00686A7B  |. 56             PUSH ESI
00686A7C  |. 57             PUSH EDI
00686A7D  |. E8 8FE5FDFF    CALL Conquer.00665011
00686A82  |. 83C4 0C        ADD ESP,0C
00686A85  |. 84C0           TEST AL,AL
00686A87  |. 75 17          JNZ SHORT Conquer.00686AA0
00686A89  |. 68 E4CF9600    PUSH Conquer.0096CFE4                    ;  ASCII "[PM]"
00686A8E  |. 56             PUSH ESI
00686A8F  |. 57             PUSH EDI

JMP the JNZ SHORT Conquer.00686AA0 that lies directly above the line of ASCII "[PM]"

Read about PM commands in this post [Only registered and activated users can see links. Click Here To Register...]

5-Removing flashing taskbar icon:-

-Right click >> Search for >> All intermodular calls
-Type Flash, you will see FlashWindow, press enter, you will find

Code:

0040B471   . EB 39          JMP SHORT Conquer.0040B4AC
0040B473   . 6A 01          PUSH 1                                   ; /Invert = TRUE
0040B475   . FF76 20        PUSH DWORD PTR DS:[ESI+20]               ; |hWnd
0040B478   . FF15 0C689000  CALL DWORD PTR DS:[<&USER32.FlashWindow>>; \FlashWindow

-3 lines above change JNZ to JMP

6-Removing website pop up on exit:-
-Right click >> Search for >> All reference text strings
-right click >> Search for text >> co.99.com >> OK >> press enter
-You will find these code:-

Code:

00619C8E   . 68 BC5F9600    PUSH Conquer.00965FBC                    ;  ASCII "http://co.99.com/signout/"
00619C93   . E9 D5050000    JMP Conquer.0061A26D
00619C98   > E8 36A90400    CALL Conquer.006645D3

-on JMP Conquer.0061A26D press enter it will lead you to these codes :-

Code:

0061960B   > 53             PUSH EBX                                 ; |Operation
0061960C   . FF76 20        PUSH DWORD PTR DS:[ESI+20]               ; |hWnd
0061960F   . FF15 C0679000  CALL DWORD PTR DS:[<&SHELL32.ShellExecut>; \ShellExecuteA

-Sellect the 3 lines >> right click >> Binary >> Fill with Nops.
-go back to all reference text strings >> Search for the next co.99.com u can use Ctrl+L >> press enter
-it will lead you to similar codes like before :-

Code:

0061A867   . 68 BC5F9600    PUSH Conquer.00965FBC                    ;  ASCII "http://co.99.com/signout/"
0061A86C   . E9 D5050000    JMP Conquer.0061AE46
0061A871   > E8 5D9D0400    CALL Conquer.006645D3

-on JMP Conquer... press enter it will lead you to codes similar to that we noped a while ago
-Sellect the 3 lines >> right click >> Binary >> Fill with Nops.just like we did before.

-Remember to Save your work after you end modifying :-
Right click >> copy for excutable >> all modifications >> copy all >> a new window appear on which you should
Right click or try to exit >> Save file >> you are free to save to the game folder or another folder but if saved to
the game folder. a message will appear asking if you wanna
overwrite the old conquer, choose yes.
-Modifications will work if the modified conquer.exe is put into the game folder instead of the original conquer.exe
Now we`ve done :)

08/31/2015 21:47 jokerboy123#2

I've tried the one for unlocking FPS but whenever i try i get different codes than you Pic : [Only registered and activated users can see links. Click Here To Register...] (It's tinypic.com incase you don't trust the link). Could u tell me whatever i do wrong?o_o, i have been trying this for ages lol (Thanks though!)

P.S if u don't trust the link, which site u want me to upload on?^^

08/31/2015 22:23 pro4never#3

Quote:

Originally Posted by jokerboy123

I've tried the one for unlocking FPS but whenever i try i get different codes than you Pic : [Only registered and activated users can see links. Click Here To Register...] (It's tinypic.com incase you don't trust the link). Could u tell me whatever i do wrong?o_o, i have been trying this for ages lol (Thanks though!)

P.S if u don't trust the link, which site u want me to upload on?^^

That image isn't loading for me for some reason but yah...

Are you using a 64 bit OS? If so make sure you're using a 64 bit debugger. Last I checked olly only has a 32 bit version (although they were looking at updating).

08/31/2015 22:31 phize#4

Should probably say "for retarded camels", since it doesn't teach you shit. It's just another copy/pasted spoonfeed step-by-step guide.

08/31/2015 23:04 Best Coder 2014#5

Quote:

Originally Posted by jokerboy123

I've tried the one for unlocking FPS but whenever i try i get different codes than you Pic : [Only registered and activated users can see links. Click Here To Register...] (It's tinypic.com incase you don't trust the link). Could u tell me whatever i do wrong?o_o, i have been trying this for ages lol (Thanks though!)

P.S if u don't trust the link, which site u want me to upload on?^^

This spoonfeed guide actually forgot to mention a crucial step, which is why you're having problems.

Quote:

Originally Posted by pro4never

That image isn't loading for me for some reason but yah...

Are you using a 64 bit OS? If so make sure you're using a 64 bit debugger. Last I checked olly only has a 32 bit version (although they were looking at updating).

It doesn't matter if OllyDbg is a 32-bit or 64-bit application, what matters is the type of applications that it supports which in Olly's case is 32-bit applications. Since Conquer is a 32-bit application, it's all good.
In other words: OllyDbg works fine on 64-bit operating systems for debugging/disassembling/analysis of 32-bit applications.

08/31/2015 23:25 WhyNot555#6

Quote:

Originally Posted by phize

Should probably say "for retarded camels", since it doesn't teach you shit. It's just another copy/pasted spoonfeed step-by-step guide.

Why didn't u consider:

Quote:

Originally Posted by WhyNot555

this topic is for beginners.

- I`m not a programmer and 90% credits goes to those of ollydbg&co thread and 10% to other posts, I just collected & updated the most needed modifications to be easier to be found hoping to be useful for beginners.

:( I think that will reduce much spam for mods, that was a reason to do so.

Quote:

Originally Posted by Best Coder 2014

This spoonfeed guide actually forgot to mention a crucial step, which is why you're having problems.

Actually I've never met a problem with that, so I didn't need to know. That is why IDK.

Quote:

Originally Posted by jokerboy123

I've tried the one for unlocking FPS but whenever i try i get different codes than you Pic : [Only registered and activated users can see links. Click Here To Register...] (It's tinypic.com incase you don't trust the link). Could u tell me whatever i do wrong?o_o, i have been trying this for ages lol (Thanks though!)

P.S if u don't trust the link, which site u want me to upload on?^^

After seeing the picture, you should have done something wrong. Make sure that you are veiwing "module conquer". Then on "all intermodular calls" window press "S" then "L" then Enter. You should find the right code.In case your problem is with the 64 OS get a look here [Only registered and activated users can see links. Click Here To Register...]

09/01/2015 07:35 mohmmeuud#7

thnx man :D

09/01/2015 07:41 jokerboy123#8

Quote:

Originally Posted by WhyNot555

Why didn't u consider:

:( I think that will reduce much spam for mods, that was a reason to do so.

Actually I've never met a problem with that, so I didn't need to know. That is why IDK.

After seeing the picture, you should have done something wrong. Make sure that you are veiwing "module conquer". Then on "all intermodular calls" window press "S" then "L" then Enter. You should find the right code.In case your problem is with the 64 OS get a look here [Only registered and activated users can see links. Click Here To Register...]

Little issue, can't find anywhere the ''module conquer'', I've checked all the tabs.. View / Debug / Plugins / Options / Windows but can't find it anywhere. Also tried different OllyDbgs.

I've done this : Opened Ollydbg as Admin, Attach conquer..then searched for Module conquer but thats the only thing im missing atm (Also tried Right click and check the options but nothing)

#Edit, i've downloaded OllyDbg 100, There i could find the ''Module'' but not the ''all intermodular calls''

Quote:

Originally Posted by pro4never

That image isn't loading for me for some reason but yah...

Are you using a 64 bit OS? If so make sure you're using a 64 bit debugger. Last I checked olly only has a 32 bit version (although they were looking at updating).

Yeah i'm using 64 bit but as i'm kinda ''nooby'' with these stuff, I have no idea which debugger to download i've tried to download one but it doesn't do anything

09/01/2015 09:22 WhyNot555#9

Quote:

Originally Posted by jokerboy123

Little issue, can't find anywhere the ''module conquer'', I've checked all the tabs.. View / Debug / Plugins / Options / Windows but can't find it anywhere. Also tried different OllyDbgs.

I've done this : Opened Ollydbg as Admin, Attach conquer..then searched for Module conquer but thats the only thing im missing atm (Also tried Right click and check the options but nothing)

#Edit, i've downloaded OllyDbg 100, There i could find the ''Module'' but not the ''all intermodular calls''

Yeah i'm using 64 bit but as i'm kinda ''nooby'' with these stuff, I have no idea which debugger to download i've tried to download one but it doesn't do anything

Well use ollydbg 1. 10 [Only registered and activated users can see links. Click Here To Register...] do the same but veiw, Game Data then veiw, module conquer. I would cupture a video if my lap isn't damaged atm and being fixed.

09/01/2015 09:40 jokerboy123#10

Quote:

Originally Posted by WhyNot555

Well use ollydbg 1. 10 [Only registered and activated users can see links. Click Here To Register...] do the same but veiw, Game Data then veiw, module conquer. I would cupture a video if my lap isn't damaged atm and being fixed.

I feel like i'm missing something or just don't see it, downloaded the 110 and attached, view -> nowhere game data :S (Sorry for asking alot)

09/01/2015 21:31 anonim95#11

@WhyNot555 : Ignore people comments which are rude and useless.

Thanks for your work.

09/02/2015 08:16 gunite69#12

I wanna ask, before i get flamed and shit...

I know editing magictype.dat is instant bot jail.

but for multiclient, speedhack, unlocked fps. what are the chances of getting caught? Very Low?, Low? etc? or infact... what are the chances of getting caught if u modify the conquer.exe with no means of protection from disabling any anti bot checks?

how strong is TQs anti bot system?

09/02/2015 08:36 Spirited#13

This was posted to my community a few days ago. Read section 10c of their end-user agreement. I'll let that answer your own question how they check for bots (let you form your own opinion). If you're having troubles, here's a starting point: it's quite aggressive and intrusive, as you'll see in this quote from the agreement.

Quote:

(c) Consent to Monitor: Please note that, when running, some TQ games may monitor your computer's random access memory ("RAM"), media access control ("MAC") address, configuration files and system files, etc., for unauthorized third party programs running concurrently with your TQ game which, in TQ's sole determination: (i) enable or facilitate cheating of any type; (ii) allow users to modify or hack the applicable TQ game interface, environment, and/or experience in any way not expressly authorized by TQ; or (iii) intercept, "mine" or otherwise collect information from or through the applicable TQ game (an "Unauthorized Third Party Program"). In the event that a TQ game detects an Unauthorized Third Party Program, (a) the TQ game may communicate information back to TQ, including without limitation your TQ Account username, details about the Unauthorized Third Party Program detected and the activities or functions performed thereby, and/or details about your computer, and/or (b) TQ may exercise any or all of its rights and remedies under this Agreement or the applicable TQ game end user license agreement without prior notice to the user linked to such Unauthorized Third Party Program.

09/02/2015 09:42 WhyNot555#14

Quote:

Originally Posted by gunite69

I wanna ask, before i get flamed and shit...

I know editing magictype.dat is instant bot jail.

but for multiclient, speedhack, unlocked fps. what are the chances of getting caught? Very Low?, Low? etc? or infact... what are the chances of getting caught if u modify the conquer.exe with no means of protection from disabling any anti bot checks?

how strong is TQs anti bot system?

I've been editing the client for long time and till the last week there was no botjailing for any of the above modifications I cant check now just due to a pc problem. Othe mods like multiclient wasn't botjailing but gives 1 day ban if u logged in more than 3 clients. Speedhack through pm commands or angelius client wasn't botjailing unless some one reported a video of u speedhacking but speedhacking through cheatengine gives 1day ban. Magic type edits is botjailing. As a precaution always test if ur mods is botjailing or not by using a noob char specially after every new patch and as I heared ini files editig is easily detectable.

09/02/2015 09:45 gunite69#15

Quote:

Originally Posted by WhyNot555

I've been editing the client for long time and till the last week there was no botjailing for any of the above modifications I cant check now just due to a pc problem. Othe mods like multiclient wasn't botjailing but gives 1 day ban if u logged in more than 3 clients. Speedhack through pm commands or angelius client wasn't botjailing unless some one reported a video of u speedhacking but speedhacking through cheatengine gives 1day ban. Magic type edits is botjailing. As a precaution always test if ur mods is botjailing or not by using a noob char specially after every new patch and as I heared ini files editig is easily detectable.

Thanks man just what i was looking for. So olly edits by far is only one day ban I guess

Edit: does M* multi source still work ? Or is that what angelius is based from?

Page 1 of 6

Last »