[Serverinfo.py] Kleines Problem

04/02/2015 14:26 SolWayne#1
Standart sieht es so aus

PHP Code:
SERVER_NAME = "Mosha"
SERVER_IP      = "SERVERIP"
CH_NAME        = "CH1"
CH_2       = "CH2"
CH_3       = "CH3"
CH_4       = "CH4"
PORT_1         = 13000
PORT_2         = 11000
PORT_3        = 13099
PORT_4        = 14000
PORT_5        = 14100
PORT_6        = 14200


STATE_NONE = "Offline"
                    
STATE_DICT = {
    0 : "....",
    1 : "NORM",
    2 : "BUSY",
    3 : "FULL"
}

SERVER01_CHANNEL_DICT = {
    1:{"key":11,"name":CH_NAME,"ip":SERVER_IP,"tcp_port":PORT_1,"udp_port":PORT_1,"state":STATE_NONE,},
    2:{"key":11,"name":CH_2,"ip":SERVER_IP,"tcp_port":PORT_4,"udp_port":PORT_4,"state":STATE_NONE,},
    3:{"key":11,"name":CH_3,"ip":SERVER_IP,"tcp_port":PORT_5,"udp_port":PORT_5,"state":STATE_NONE,},
    4:{"key":11,"name":CH_4,"ip":SERVER_IP,"tcp_port":PORT_6,"udp_port":PORT_6,"state":STATE_NONE,},
}

REGION_NAME_DICT = {
    0 : "",        
}

REGION_AUTH_SERVER_DICT = {
    0 : {
        1 : { "ip":SERVER_IP, "port":PORT_2, },

    }        
}

REGION_DICT = {
    0 : {
        1 : { "name" :SERVER_NAME, "channel" : SERVER01_CHANNEL_DICT, },                        
    },
}

MARKADDR_DICT = {
    10 : { "ip" : SERVER_IP, "tcp_port" : PORT_3, "mark" : "10.tga", "symbol_path" : "10", },
} 
Und so wen ich es bearbeitet habe

PHP Code:
SERVER_NAME = "Mosha"
SERVER_N2 = "Kartago"
SERVER_IP      = "SERVERIP"
SERVER_I2      = "ServerIP2"
CH_NAME        = "CH1"
CH_2       = "CH2"
CH_3       = "CH3"
CH_4       = "CH4"
PORT_1         = 13000
PORT_2         = 11000
PORT_3        = 13099
PORT_4        = 14000
PORT_5        = 14100
PORT_6        = 14200


STATE_NONE = "Offline"
                    
STATE_DICT = {
    0 : "....",
    1 : "NORM",
    2 : "BUSY",
    3 : "FULL"
}

SERVER01_CHANNEL_DICT = {
    1:{"key":11,"name":CH_NAME,"ip":SERVER_IP,"tcp_port":PORT_1,"udp_port":PORT_1,"state":STATE_NONE,},
    2:{"key":11,"name":CH_2,"ip":SERVER_IP,"tcp_port":PORT_4,"udp_port":PORT_4,"state":STATE_NONE,},
    3:{"key":11,"name":CH_3,"ip":SERVER_IP,"tcp_port":PORT_5,"udp_port":PORT_5,"state":STATE_NONE,},
    4:{"key":11,"name":CH_4,"ip":SERVER_IP,"tcp_port":PORT_6,"udp_port":PORT_6,"state":STATE_NONE,},

SERVER02_CHANNEL_DICT = {
    1:{"key":11,"name":CH_NAME,"ip":SERVER_I2,"tcp_port":PORT_1,"udp_port":PORT_1,"state":STATE_NONE,},
    2:{"key":11,"name":CH_2,"ip":SERVER_I2,"tcp_port":PORT_4,"udp_port":PORT_4,"state":STATE_NONE,},
    3:{"key":11,"name":CH_3,"ip":SERVER_I2,"tcp_port":PORT_5,"udp_port":PORT_5,"state":STATE_NONE,},
    4:{"key":11,"name":CH_4,"ip":SERVER_I2,"tcp_port":PORT_6,"udp_port":PORT_6,"state":STATE_NONE,},
}

REGION_NAME_DICT = {
    0 : "",        
}

REGION_AUTH_SERVER_DICT = {
    0 : {
        1 : { "ip":SERVER_IP, "port":PORT_2, },
        2 : { "ip":SERVER_I2, "port":PORT_2, },

    }        
}

REGION_DICT = {
    0 : {
        1 : { "name" :SERVER_NAME, "channel" : SERVER01_CHANNEL_DICT, },                        
        2 : { "name" :SERVER_N2, "channel" : SERVER02_CHANNEL_DICT, },
    },
}

MARKADDR_DICT = {
    10 : { "ip" : SERVER_IP, "tcp_port" : PORT_3, "mark" : "10.tga", "symbol_path" : "10", },
} 
Und der syserr kommt nur nacht bearbeiten der serverinfo.py

PHP Code:
0402 14:23:01244 :: Traceback (most recent call last):

0402 14:23:01244 ::   File "introLogo.py", line 60, in OnUpdate

0402 14:23:01244 ::   File "networkModule.py", line 177, in SetLoginPhase

0402 14:23:01244 ::   File "system.py", line 130, in __pack_import

0402 14:23:01245 ::   File "system.py", line 110, in _process_result

0402 14:23:01245 ::   File "introLogin.py", line 9, in <module>

0402 14:23:01245 ::   File "system.py", line 130, in __pack_import

0402 14:23:01245 ::   File "
0402 14:23:01245 :: serverInfo.py
0402 14:23:01245 :: ", line 
0402 14:23:01245 :: 32
0402 14:23:01246 :: 

0402 14:23:01246 ::     
0402 14:23:01246 :: SERVER02_CHANNEL_DICT = {

0402 14:23:01246 ::     
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 ::  
0402 14:23:01246 :: ^

0402 14:23:01246 :: SyntaxError
0402 14:23:01246 :: : 
0402 14:23:01246 :: invalid syntax
0402 14:23:01246 :: 
weiß nicht was er da für faxxen macht könnt ihr mal nach schauen Danke

Mfg,

Wayne

Kann geclost werden abs schon gefunden :D
04/02/2015 14:36 .K0rí#2
Code:
SERVER_NAME = "Mosha" 
SERVER_N2 = "Kartago" 
SERVER_IP      = "SERVERIP" 
SERVER_I2      = "ServerIP2" 
CH_NAME        = "CH1" 
CH_2       = "CH2" 
CH_3       = "CH3" 
CH_4       = "CH4" 
PORT_1         = 13000 
PORT_2         = 11000 
PORT_3        = 13099 
PORT_4        = 14000 
PORT_5        = 14100 
PORT_6        = 14200 


STATE_NONE = "Offline" 
                     
STATE_DICT = { 
    0 : "....", 
    1 : "NORM", 
    2 : "BUSY", 
    3 : "FULL" 
} 

SERVER01_CHANNEL_DICT = { 
    1:{"key":11,"name":CH_NAME,"ip":SERVER_IP,"tcp_port":PORT_1,"udp_port":PORT_1,"state":STATE_NONE,}, 
    2:{"key":11,"name":CH_2,"ip":SERVER_IP,"tcp_port":PORT_4,"udp_port":PORT_4,"state":STATE_NONE,}, 
    3:{"key":11,"name":CH_3,"ip":SERVER_IP,"tcp_port":PORT_5,"udp_port":PORT_5,"state":STATE_NONE,}, 
    4:{"key":11,"name":CH_4,"ip":SERVER_IP,"tcp_port":PORT_6,"udp_port":PORT_6,"state":STATE_NONE,}, 
}
SERVER02_CHANNEL_DICT = { 
    1:{"key":11,"name":CH_NAME,"ip":SERVER_I2,"tcp_port":PORT_1,"udp_port":PORT_1,"state":STATE_NONE,}, 
    2:{"key":11,"name":CH_2,"ip":SERVER_I2,"tcp_port":PORT_4,"udp_port":PORT_4,"state":STATE_NONE,}, 
    3:{"key":11,"name":CH_3,"ip":SERVER_I2,"tcp_port":PORT_5,"udp_port":PORT_5,"state":STATE_NONE,}, 
    4:{"key":11,"name":CH_4,"ip":SERVER_I2,"tcp_port":PORT_6,"udp_port":PORT_6,"state":STATE_NONE,}, 
} 

REGION_NAME_DICT = { 
    0 : "",         
} 

REGION_AUTH_SERVER_DICT = { 
    0 : { 
        1 : { "ip":SERVER_IP, "port":PORT_2, }, 
        2 : { "ip":SERVER_I2, "port":PORT_2, }, 

    }         
} 

REGION_DICT = { 
    0 : { 
        1 : { "name" :SERVER_NAME, "channel" : SERVER01_CHANNEL_DICT, },                         
        2 : { "name" :SERVER_N2, "channel" : SERVER02_CHANNEL_DICT, }, 
    }, 
} 

MARKADDR_DICT = { 
    10 : { "ip" : SERVER_IP, "tcp_port" : PORT_3, "mark" : "10.tga", "symbol_path" : "10", }, 
}
Dein Fehler (damit du auch was lernst dabei)

Code:
SERVER01_CHANNEL_DICT = {
du hast ja das { am ende du solltest auch zum schluss die } machen damit es geht

Ansonsten schau dir den unterschied an ;)

Mit freundlichen Grüßen
.Kori