BruteLeveler 2.1 bot

Page 1 of 2 1 2
08/28/2009 12:59 Kholdstare0#1
Hi all

[Only registered and activated users can see links. Click Here To Register...]

Fixed a small bug with the icon file causing to crash on some machines. The new release comes now with installer that correctly register comdlg32.ocx which caused error messages on some machines.

instructions:
DO NOT MOVE THE SLIDER TO FAST BEFORE STARTING. Leave it at default, if you are sure your machine/connection can handle it, carefully move it to faster, but not before!

The opponent matcher works as following: It reads out 6 brutes at the same level of the brute in the list, it reads Health points, strength, agility and speed. It add Strength + agility + speed = xx + Healthpoints. Then the brute with the lowest value will be chosen, except if it have a bear or wolf.
have Phun!
08/28/2009 14:55 Kholdstare0#2
another update, now comes with x-y offset wizard. Plz re-download under the link above.
08/29/2009 13:26 Die Schnittstelle#3
scan

Quote:
a-squared 4.5.0.24 2009.08.29 -
AhnLab-V3 5.0.0.2 2009.08.29 -
AntiVir 7.9.1.7 2009.08.28 -
Antiy-AVL 2.0.3.7 2009.08.24 -
Authentium 5.1.2.4 2009.08.29 -
Avast 4.8.1335.0 2009.08.28 -
AVG 8.5.0.406 2009.08.29 -
BitDefender 7.2 2009.08.29 -
CAT-QuickHeal 10.00 2009.08.29 -
ClamAV 0.94.1 2009.08.29 -
Comodo 2124 2009.08.29 -
DrWeb 5.0.0.12182 2009.08.29 -
eSafe 7.0.17.0 2009.08.27 -
eTrust-Vet 31.6.6707 2009.08.28 -
F-Prot 4.5.1.85 2009.08.29 -
F-Secure 8.0.14470.0 2009.08.28 -
Fortinet 3.120.0.0 2009.08.29 -
GData 19 2009.08.29 -
Ikarus T3.1.1.68.0 2009.08.29 -
Jiangmin 11.0.800 2009.08.29 -
K7AntiVirus 7.10.830 2009.08.28 -
Kaspersky 7.0.0.125 2009.08.29 -
McAfee 5723 2009.08.28 -
McAfee+Artemis 5723 2009.08.28 -
McAfee-GW-Edition 6.8.5 2009.08.29 -
Microsoft 1.5005 2009.08.29 -
NOD32 4379 2009.08.29 -
Norman 2009.08.28 -
nProtect 2009.1.8.0 2009.08.29 -
Panda 10.0.2.2 2009.08.29 -
PCTools 4.4.2.0 2009.08.28 -
Prevx 3.0 2009.08.29 -
Rising 21.44.40.00 2009.08.28 -
Sophos 4.45.0 2009.08.29 -
Sunbelt 3.2.1858.2 2009.08.29 -
Symantec 1.4.4.12 2009.08.29 -
TheHacker 6.3.4.3.390 2009.08.28 -
TrendMicro 8.950.0.1094 2009.08.28 -
VBA32 3.12.10.10 2009.08.29 -
ViRobot 2009.8.28.1907 2009.08.28 -
VirusBuster 4.6.5.0 2009.08.28 -
08/29/2009 13:29 Kholdstare0#4
yes, it's not a virus. Or what do you want to tell with your eloquent reply?
08/31/2009 16:39 Kholdstare0#5
A new version of BruteLeveler is out:

[Only registered and activated users can see links. Click Here To Register...]

Now complete without timing slider, the delays are now automatically calculated. Just open your list and click start.

2) I'm fed up of firefox and its strange behaviour when a session is closed unexptected it tries to restore the session at the next startup, this causes a lot of delays. Additionally some users reported error messages this is because on exit firefox pops up the 'close tabs?' dialog. In the new version now only IE will be used, firefox is NOT supported anymore.
09/02/2009 16:44 Kholdstare0#6
Another update:

[Only registered and activated users can see links. Click Here To Register...]

Fixed a few bugs. IE hanging error fixed, also fixed a bug with brutes that have blanks and _ char in their names.

Enjoy.
09/21/2009 14:37 Kholdstare0#7
Another update and fixed a few bugs:


[Only registered and activated users can see links. Click Here To Register...]

This is _not_ the fake version posted on mybrutecheats.com
09/23/2009 09:15 Kholdstare0#8
Released version 2.1.0.47

Now works with slow network connections.

[Only registered and activated users can see links. Click Here To Register...]
09/27/2009 01:31 Die Schnittstelle#9
Quote:
Originally Posted by sixelas View Post
This is fake.

"Event occurred on a new file created by the application: C:\WINDOWS\system32\msiexec.exe. The file was moved to quarantine. You may close this window. Please submit the file to ESET for analysis."

It's still clean for me..
Quote:
a-squared 4.5.0.24 2009.09.26 -
AhnLab-V3 5.0.0.2 2009.09.26 -
AntiVir 7.9.1.25 2009.09.25 -
Antiy-AVL 2.0.3.7 2009.09.25 -
Authentium 5.1.2.4 2009.09.26 -
Avast 4.8.1351.0 2009.09.26 -
AVG 8.5.0.412 2009.09.26 -
BitDefender 7.2 2009.09.26 -
CAT-QuickHeal 10.00 2009.09.26 -
ClamAV 0.94.1 2009.09.26 -
Comodo 2447 2009.09.26 -
DrWeb 5.0.0.12182 2009.09.26 -
eSafe 7.0.17.0 2009.09.24 -
eTrust-Vet 31.6.6761 2009.09.25 -
F-Prot 4.5.1.85 2009.09.26 -
F-Secure 8.0.14470.0 2009.09.26 -
Fortinet 3.120.0.0 2009.09.26 -
GData 19 2009.09.27 -
Ikarus T3.1.1.72.0 2009.09.26 -
Jiangmin 11.0.800 2009.09.26 -
K7AntiVirus 7.10.855 2009.09.26 -
Kaspersky 7.0.0.125 2009.09.27 -
McAfee 5753 2009.09.26 -
McAfee+Artemis 5753 2009.09.26 -
McAfee-GW-Edition 6.8.5 2009.09.27 -
Microsoft 1.5005 2009.09.23 -
NOD32 4460 2009.09.26 -
Norman 6.01.09 2009.09.26 -
nProtect 2009.1.8.0 2009.09.26 -
Panda 10.0.2.2 2009.09.26 -
PCTools 4.4.2.0 2009.09.25 -
Prevx 3.0 2009.09.27 -
Rising 21.48.52.00 2009.09.26 -
Sophos 4.45.0 2009.09.27 -
Sunbelt 3.2.1858.2 2009.09.26 -
Symantec 1.4.4.12 2009.09.26 -
TheHacker 6.5.0.2.019 2009.09.26 -
TrendMicro 8.950.0.1094 2009.09.25 -
VBA32 3.12.10.11 2009.09.25 -
ViRobot 2009.9.26.1958 2009.09.26 -
VirusBuster 4.6.5.0 2009.09.26 -
09/27/2009 10:08 disher#10
hey kholdstare,

thanks a lot for this tool. exactly the thing ive been looking for.

is it possible to get the slider back in? my connection is way to slow to keep up so i have to manually click the fight button every time
09/30/2009 13:36 Kholdstare0#11
Release a new version, 2.01.0052, dl here:

[Only registered and activated users can see links. Click Here To Register...]

New Features:

- Increased timeout for slow network connections @disher please report when it helps
- Detects non-existing, or deleted brutes
- Added a Skip button, for brutes hanging in a timeout loop (see next function)
- Added option to level up password protected brutes.

The option to level up password protected brutes is more meant to level up your existing brutes as for pupils. If you have a couple of pw protected brutes you wish to do your daily 3 fights automatically then this option is for you. To enable leveling up pw protected brutes, you need to do the following:

1) Find 2 opponent brutes you always (or most likely) win. Write this two names down. You may want to choose 2 brutes that have the same level as your brute to gain 2xp for each brute

2) edit your brute pupil file as follows:

brute1
brute2
brute3

These brutes above are normal, not pw protected brutes. Now with pw protected brutes you need to create an entry as following:

brute1%password%opponent1%opponent2

You need to double check this entries for syntax errors, otherwise the program could hang up itself. The '%' percent sign is the separator sign. For opponents try to choose brutes without any special chars. If you have a % char in your password and or in your brutes name, this function will NOT work.

brute1 = your brute
password = your brutes password
opponent1 = one opponent you know you most likely win
opponent2 = one opponent you know you most likely win

There is no opponent 3 because as with pupils the 3th fight is against yourself to gain 2xp for sure.

example file:

Code:
myelitebrute%secret22%nutcracker%20934984 [COLOR="Lime"]<- pw protected brute[/COLOR]
mypower01%secret11%babbel33%238349292 [COLOR="lime"]<- pw protected brute[/COLOR]
asdfasf23 [COLOR="lime"]<- pupil, non pw protected[/COLOR]
xlxckckck20 [COLOR="lime"]<- pupil, non pw protected[/COLOR]
cks023jsdfl02 [COLOR="lime"]<- pupil, non pw protected[/COLOR]
If your brute is out of the daily 3 fights then the programm WILL HANG for 15 seconds in the timeout loop. Just click skip to check the next brute. I recommend, on the first day search and find for the two opponents you most likely win against them. Then the NEXT DAY, when you have 3 daily fights again, try it with the brute leveler tool.
10/02/2009 14:04 Kholdstare0#12
[Only registered and activated users can see links. Click Here To Register...]

Another small update.

- Fixed a bug with the 'skip' button
- Added a Error output window, it also shows a list of the brutes that are deleted/non exisiting on mybrute site. With the list you can easely fix your text file
- Added mybrute-style GUI

screenshot here:

[Only registered and activated users can see links. Click Here To Register...]

I garbled out pupils text for obvious reasons.
10/05/2009 17:43 ZaZiZu#13
kanns mir einer auf deutsch erklären pls ^^?...
ich weiß nur:
1. es geht nur mit explorer
2. koordinaten vom fight knopf speichern
3. text dokument mit eigenen anderen brutes (richtig so?)
4. alle fenster schließen und starten..
dann kommt bei mir ein fehler, dass es nicht verbinden kann
10/05/2009 18:09 disher#14
thanks for the new release. the ui looks more brute like now but the delay is still too fast for my connection (from asia).

about the lvl option for password protected brutes. somehow it keeps opening a new tab but never switches to the tab (IE8) to start the fight and just closes the browser. it does however login correctly.
10/06/2009 10:07 Kholdstare0#15
Another update:

[Only registered and activated users can see links. Click Here To Register...]

- Increased timeout again - check it out @disher
- More accurate 'estimated time left' calculation
- Now calculates XP your brute list gained. After completing the list in output window 'XP gained in total' is written.

I'll look later into the IE8 issue with pw protected brutes. I have only tested it with IE6 (shame on me)

@Viktor [german]
Du hast ein Textfile mit all deinen pupils drinnen, d.h. pupils sind NICHT und dürften NICHT passwort geschützt sein.
Beispiel:
pupil1
pupil2
pupil3
etc
etc2
etc3

Einmalig muss Du dann das Offset einstellen. Einfach ein beliebiger Pupil oder brute nehmen, der noch einen fight übrig hat. Das musst Du im Internet Explorer machen. Also z.b. meinbrutename.mybrute.com im IE laden. Dann auf 'arene', irgendeinen Gegner nehmen, und warten bis Du unten in der Mitte den grossen FIGHT Knopf sieht, ABER NICHT AUF FIGHT drücken.

Oeffne dann den leveler, und beantworte die Frage: 'is your IE browser open, there should be a big fight button...' mit yes. Dann OK drücken. Jetzt mit der Maus in die Mitte des 'FIGHT' Knopfes zeigen, aber nicht mit linker Maustaste bestätigen, sondern die Escape Taste drücken. Wenn es funktioniert hat, geht dann der GUI auf und die siehst eine Angabe unter 'set'.

Dann lädst Du Dein textfile rein. Kontrolliere, ob die Anzahl Deiner pupils korrekt angegeben ist.
Page 1 of 2 1 2