[Planetside 2 CertBot] 30k xp per h

Hey guys,
I'm back with a new bot. It works similar to my old bot, which made 40k xp per h, but since PS2 has some limitations now, its not that effective anymore.
Haven't tested it much yet, but ran stable for some time yesterday.

What do you need?

3 PS2 accounts
at least 4gb ram
some free space on your hdd
Cheatengine

How does it work?
One person heals another, which gets shot by a third one. Most of the XP are made by the healer (~30k), as a sideffect the shooter also gets XP (~20k) and the dummy ~10k. Because after 500xp you don't get new xp, the healer gets killed by the shooter and revived by the dummy.
So you need 3 Planeside folders to run 3 Clients at the same time. Just copy your PS2 folder 2 times.
(I didn't choose to get the points by killing dummys, because the K/D ratio would be verry obvious)

How to start it:

Note: Gui and pointers changed in last update. So the video is not up to date.

[Only registered and activated users can see links. Click Here To Register...]
First start two PS2 clients (as medics, in the same team) and cheatengine. Scan for 50 exact value on Healer and Dummys process. Damage the healer/dummy untill he loses some hp and scan for decreased value. After 2-3 times doing this you should have the pointer. Save them in the bot.
Now start the 3rd client. This will be the shooter (engineer, different team). Place a turret like shown in the video (Shooter aims at the dummy. Between dummy and shooter is the healer. While crouching the healer can't get shot, but when he is not, he will get shot.).
Now we need to config the bot. Activate a PS2 window, press F7 and remember which window it was. Select in the opening gui the window (do the same for the two other windows). Also kill and revive the healer once and place the mouse over the accept revive Lable, hit F7 and select lable position.
Now you can start the bot (F8 or button).

The controls are:
F7 for adding windows/coordinates
F8 for pause/unpause
F9 for terminating

When the bot gets terminated, it saves the adress for health. Hit reset if you need to change them.

FAQ:

Reviving time is to short
[Only registered and activated users can see links. Click Here To Register...]

You can't get it to work?
Maybe this video helps: [Only registered and activated users can see links. Click Here To Register...]
The video contains mistakes, see the next pages to avoid them.
Also check the other pages of this thread!
If it still doesn't work, post here if possible with video.

Getting banned?
Has never happened to me. I have one char at lvl 50 which is 5 months old.
[Only registered and activated users can see links. Click Here To Register...]

What does the numbers in the input box at the botom stand for?
There is a limitation on how many XP you can get by reviving. So the healer has to get killed from time to time. The number says how many times the dummy will get shot. If you notice, the healer doesn't get any more XP, decrease the number.
(10 if you get 40XP per healmessage, 20 if you get 20 XP roughly)
The other one is the time in milliseconds, it takes to revive the healer. Depends on the level of the healing gun of the Dummy.

If you notice any bugs or face any problem, feel free to mention them, i'll work on them as soon as possible :)
Edit: Sorry I wont update the bot anymore.

Autoit Code:

Spoiler

If you want to compile it yourself, you may need the nomadmemory.au3. Added it as an attachment.

PHP Code:


			
#RequireAdmin
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <Date.au3>
#include <ImageSearch.au3>
#include <array.au3>
#include <NomadMemory.au3>


Opt("MouseClickDownDelay", 50)
Opt("MouseClickDelay", 300)
Opt("SendKeyDownDelay", 100)


Dim $aWindows[3],$aCoords[2],$h,$m,$s,$hProcessHeal,$heal,$kill,$killing,$shoot,$shooting,$healing,$Config,$hProcessDummy
$bIsRunning = False
$totaltime = TimerInit()
$lastshot = TimerInit()
$timerLastNoHeal=TimerInit()
$iCount = 0
$shots = 0



#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("PS2 Bot", 216, 156, 192, 124)
$ButtonStart = GUICtrlCreateButton("Go!", 120, 96, 75, 23)
GUICtrlSetState(-1,$GUI_DISABLE)
$ButtonReset = GUICtrlCreateButton("Reset", 120, 66, 75, 23)
$InputMemHealHealth = GUICtrlCreateInput("0xHealHealth",16,68,100,20)
$InputMemDummyHealth = GUICtrlCreateInput("0xDummyHealth",16,98,100,20)
$InputCount = GUICtrlCreateInput("12",174, 126,20,17)
$InputSleep = GUICtrlCreateInput("4500",121, 126,52,17)
$LabelHealHealth = GUICtrlCreateLabel("HealthHeal", 16, 128, 36, 17)
$LabelDummyHealth = GUICtrlCreateLabel("HealthDummy", 38, 128, 36, 17)
$LabelInfo = GUICtrlCreateLabel("Healer: " &_ok($aWindows[0]) &" ||  Dummy: " &_ok($aWindows[1]) &" ||  Shooter: " &_ok($aWindows[2]) &" ||  Lable: " &$aCoords[0] &"," &$aCoords[1], 16, 16, 200, 27)
$LabelTime = GUICtrlCreateLabel("Time", 73, 128, 44, 17)
$Labeli = GUICtrlCreateLabel("i", 56, 128, 15, 17)
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###



HotKeySet("{F7}","_config")
HotKeySet("{F8}","_toggle")
HotKeySet("{F9}","_terminate")

If FileExists("Ps2config.txt") Then
    GUICtrlSetData($InputMemHealHealth,FileReadLine("Ps2config.txt",1))
    GUICtrlSetData($InputMemDummyHealth,FileReadLine("Ps2config.txt",2))

    $aCoords[0] = FileReadLine("Ps2config.txt",3)
    $aCoords[1] = FileReadLine("Ps2config.txt",4)
    FileDelete("Ps2config.txt")
EndIf



While 1
    _guiupdate()







    If $bIsRunning Then
        If $heal = True Then
            $heal = False
            $healing = True
            $timerHealStart=TimerInit()


            _WinActivate($aWindows[0])
            MouseDown("left")
        ElseIf $healing = True And _MemoryRead(GUICtrlRead($InputMemDummyHealth),$hProcessDummy) >= 48 Then
            $healing = False
            $shoot = True
            If $iCount >= GUICtrlRead($InputCount) Then
                $kill = True
                $shoot = False
            EndIf
            MouseUp("left")
        ElseIf TimerDiff($timerHealStart) > 5000 And TimerDiff($timerLastNoHeal) >5000 Then
            $timerLastNoHeal=TimerInit()
            MouseUp("left")
            Sleep(500)
            MouseDown("left")
        EndIf

        If $kill = True Then
            $kill = False
            $killing = True
            $shoot = False

            Send("c")
            _WinActivate($aWindows[2])
        ElseIf $killing = True and TimerDiff($lastshot) > 100 And _MemoryRead(GUICtrlRead($InputMemHealHealth),$hProcessHeal) > 0 Then
            MouseDown("left")
            Sleep(50)
            MouseUp("left")
            $lastshot = TimerInit()
        ElseIf $killing = True And _MemoryRead(GUICtrlRead($InputMemHealHealth),$hProcessHeal) = 0 Then
            $iCount = 0

            _WinActivate($aWindows[1])
            _WinActivate($aWindows[1])
            MouseDown("left")
            Sleep(100)
            MouseUp("left")
            Sleep(100)
            MouseDown("left")
            Sleep(100)
            MouseUp("left")
            Sleep(100)
            MouseDown("left")
            Sleep(GUICtrlRead($InputSleep))
            MouseUp("left")
            Sleep(100)
            If _MemoryRead(GUICtrlRead($InputMemHealHealth),$hProcessHeal) = 0 Then
                _WinActivate($aWindows[0])
                Sleep(2000)
                MouseMove($aCoords[0],$aCoords[1])
                Sleep(100)
                MouseClick("left",$aCoords[0],$aCoords[1],3)
                Sleep(4000)
                If _MemoryRead(GUICtrlRead($InputMemHealHealth),$hProcessHeal) <> 0 Then
                    $killing = False
                    Send("c")
                    $heal = True
                EndIf
            EndIf

        EndIf



        If $shoot = True Then
            $shoot = False
            $shooting = True
            $shots = 0

            _WinActivate($aWindows[2])
        ElseIf $shooting = True and $shots < 3 and TimerDiff($lastshot) >100 Then
            MouseDown("left")
            Sleep(50)
            MouseUp("left")
            $lastshot = TimerInit()
            $shots = $shots +1
        ElseIf $shots = 3 and $shooting = True Then
            $shooting = False
            $iCount = $iCount +1
            $heal = True
        EndIf




    Else
        Sleep(50)
    EndIf
WEnd

Func _guiupdate()

    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            FileWrite("Ps2config.txt",GUICtrlRead($InputMemHealHealth) &@CRLF &GUICtrlRead($InputMemDummyHealth) &@CRLF &$aCoords[0] &@CRLF &$aCoords[1])
            Exit

        Case $ButtonStart
            _toggle()

        Case $ButtonReset
            Dim $aWindows[3],$aCoords[2],$h,$m,$s,$hProcessHeal,$heal,$kill,$killing,$shoot,$shooting,$healing,$Config,$hProcessDummy
            $bIsRunning = False
            $totaltime = TimerInit()
            $lastshot = TimerInit()
            $iCount = 0
            $shots = 0
            GUICtrlSetData($LabelInfo,"Healer: " &_ok($aWindows[0]) &" ||  Dummy: " &_ok($aWindows[1]) &" ||  Shooter: " &_ok($aWindows[2]) &" ||  Lable: " &$aCoords[0] &"," &$aCoords[1])
            GUICtrlSetData($InputMemHealHealth,"0xHealHealth")
            GUICtrlSetData($InputMemDummyHealth,"0xDummyHealth")
            GUICtrlSetState($ButtonStart,$GUI_DISABLE)

    EndSwitch
    _TicksToTime(TimerDiff($totaltime),$h,$m,$s)
    GUICtrlSetData($LabelTime,$h &":" &$m &":" &$s)
    GUICtrlSetData($LabelDummyHealth,_MemoryRead(GUICtrlRead($InputMemDummyHealth),$hProcessDummy))
    GUICtrlSetData($LabelHealHealth,_MemoryRead(GUICtrlRead($InputMemHealHealth),$hProcessHeal))
    GUICtrlSetData($Labeli,$iCount)
EndFunc


Func _terminate()
    FileWrite("Ps2config.txt",GUICtrlRead($InputMemHealHealth) &@CRLF &GUICtrlRead($InputMemDummyHealth) &@CRLF &$aCoords[0] &@CRLF &$aCoords[1])
    Exit
EndFunc

Func _WinActivate($handle)
    WinActivate($handle)
    WinActivate($handle)
    WinWaitActive($handle)
    Sleep(50)
EndFunc

Func _toggle()
    If _allok() Then
        $bIsRunning = Not $bIsRunning
        If $bIsRunning Then
            GUICtrlSetData($LabelInfo,"Running!")
            $heal = True
        Else
            MouseUp("left")
            GUICtrlSetData($LabelInfo,"Paused!")
            $heal = False
            $kill = False
            $shoot = False
            $healing = False
            $killing = False
            $shooting = False
        EndIf
    EndIf
EndFunc

Func _config()


    If Not $Config Then
        GUISetState(@SW_HIDE)
        $hLastWindow = WinGetHandle("")
        Dim $coords[2] = [MouseGetPos(0),MouseGetPos(1)]


        $Config = GUICreate("Config", 441, 189, 192, 124,$WS_CAPTION)
        $ButtonAdd = GUICtrlCreateButton("Ok", 256, 152, 75, 25)
        $ButtonCancle = GUICtrlCreateButton("Cancle", 352, 152, 75, 25)
        $RadioHeal = GUICtrlCreateRadio("Healer window", 16, 40, 113, 17)
        GUICtrlSetState($RadioHeal, $GUI_CHECKED)
        $RadioDummy = GUICtrlCreateRadio("Dummy window", 16, 64, 113, 17)
        $RadioShoot = GUICtrlCreateRadio("Shooter window", 16, 88, 113, 17)
        $RadioCoord = GUICtrlCreateRadio("Lable position", 296, 40, 113, 17)
        $LabelWindow = GUICtrlCreateLabel("Last Window: " &WinGetTitle($hLastWindow), 16, 8, 250, 27)
        $LabelCoord = GUICtrlCreateLabel("Mouse Coordinates: " &$coords[0] &"," &$coords[1], 296, 8, 98, 27)
        $LabelInfo2 = GUICtrlCreateLabel("Healer: " &_ok($aWindows[0]) &" ||  Dummy: " &_ok($aWindows[1]) &" ||  Shooter: " &_ok($aWindows[2]) &" ||  Lable: " &$aCoords[0] &"," &$aCoords[1], 16, 122, 398, 27)
        GUISetState(@SW_SHOW)


        While 1
            $nMsg = GUIGetMsg()
            Switch $nMsg
                Case $ButtonCancle
                    ExitLoop
                Case $ButtonAdd
                    If GUICtrlRead($RadioHeal) = $GUI_CHECKED Then
                        $aWindows[0] = $hLastWindow
                        $hProcessHeal = _MemoryOpen(WinGetProcess($aWindows[0]))
                    ElseIf GUICtrlRead($RadioDummy) = $GUI_CHECKED Then
                        $aWindows[1] = $hLastWindow
                        $hProcessDummy = _MemoryOpen(WinGetProcess($aWindows[1]))
                    ElseIf GUICtrlRead($RadioShoot) = $GUI_CHECKED Then
                        $aWindows[2] = $hLastWindow
                    ElseIf GUICtrlRead($RadioCoord) = $GUI_CHECKED Then
                        $aCoords = $coords
                    EndIf
                    ExitLoop
            EndSwitch
        WEnd

        GUISwitch($Form1)
        GUISetState(@SW_SHOW,$Form1)
        GUIDelete($Config)
        $Config = 0



        If _allok() Then
            GUICtrlSetState($ButtonStart,$GUI_ENABLE)
        EndIf
        GUICtrlSetData($LabelInfo,"Healer: " &_ok($aWindows[0]) &" ||  Dummy: " &_ok($aWindows[1]) &" ||  Shooter: " &_ok($aWindows[2]) &" ||  Lable: " &$aCoords[0] &"," &$aCoords[1])
    EndIf

EndFunc

Func _ok($stuff)
    If $stuff Then
        Return "Ok"
    Else
        Return "Undefined"
    EndIf
EndFunc

Func _allok()
    If _ok($aWindows[0]) = "Ok" AND _ok($aWindows[1]) = "Ok" AND _ok($aWindows[2]) = "Ok" AND _ok($aCoords[0]) = "Ok" Then
        Return True
    Else
        Return False
    EndIf
EndFunc

Changelog:

Spoiler

11/25/2013 17:54 Silone1993#2

that would be nice too see
wanna watch your video ^^
if it works it will be a nice farm program

11/25/2013 18:04 butter123#3

just cutting and uploading left ;)

11/26/2013 00:05 Eltarion#4

Tried so many times now. seems not to work.

Have problems auto-click the "revive"-button.

1. Shooter shoots the dummy
2. Healer heals
3. Shooter kills dummy
4. Healer revives dummy (but do not stop healing)

Nothing happens, all are stuck.

But i, even after some manual kills, got no exp and the weapons of the shooter got disabled.

11/26/2013 15:22 butter123#5

thanks for the feedback :)

Quote:

Originally Posted by Eltarion

3. Shooter kills dummy

The shooter shouldn't kill the dummy, the shooter should kill the healer, so the healers xp limit gets reset. I'll describe it better in the first post.
Also the XP are made by the healer, no by the shooter.

Quote:

Originally Posted by Eltarion

and the weapons of the shooter got disabled.

Sounds like the shooter was in the same team as the healer and dummy are. He should be in a different team. Will also add this to first post.

11/26/2013 16:28 acerun#6

so i can use it when i am afk?

11/26/2013 16:43 butter123#7

Quote:

Originally Posted by acerun

so i can use it when i am afk?

thats what the bot is for ;)

with my last bot i made over night 1k certs. but since i havent tested this bot for more than half an hour, i cant say how stable it is.

11/26/2013 18:30 EyeofGod97#8

Is it safe or is the chance that you get banned very high?

Wird man gebannt? Ich denk mal du bist Deutscher aufgrund deines Namens.

11/26/2013 19:22 butter123#9

as long as they didnt change their detection system, your safe. botted a character to lvl 50 with my last bot. thats now 5 months ago and he still lives :D

jap, bin deutsch^^ werd aber zumindest immer noch ne englische antwort dazuschreiben, falls es auch f�r andere wichtig sein k�nnte :)
also hatte innerhalb von 5 monaten keinen ban.

11/26/2013 20:11 Eltarion#10

Quote:

Originally Posted by butter123

thanks for the feedback :)

The shooter shouldn't kill the dummy, the shooter should kill the healer, so the healers xp limit gets reset. I'll describe it better in the first post.
Also the XP are made by the healer, no by the shooter.

Sounds like the shooter was in the same team as the healer and dummy are. He should be in a different team. Will also add this to first post.

Sry, i killed the healer of course, mistyped. ^^

But yes, i was in the same squad, that could have caused the problems with the xp.

I will try it again without being in the same squad, but the fact that the revive dialogue still doesn't work shouldn't be solved by this. :/
I will try :)

Thanks for your post

11/26/2013 21:00 butter123#11

hmm could you describe a little bit more, what went wrong?

the steps should be:
1.healer stops crouching
2.shooter kills healer
3.dummy uses healgun to revive (presses mousebutton for 5 sec)
4.switch to healers window, who should have the revive message
5.wait 2 seconds (revive could cause lag)
6.click the accept lable (which position you marked before with F7)
7.wait 5 sec until he respawned
8.crouch again
9. start healing

11/26/2013 21:26 Eltarion#12

Quote:

Originally Posted by butter123

hmm could you describe a little bit more, what went wrong?

the steps should be:
1.healer stops crouching
2.shooter kills healer
3.dummy uses healgun to revive (presses mousebutton for 5 sec)
4.switch to healers window, who should have the revive message
5.wait 2 seconds (revive could cause lag)
6.click the accept lable (which position you marked before with F7)
7.wait 5 sec until he respawned
8.crouch again
9. start healing

I did everything you described in your first post and also i have watched your video and did all what you did. step by step.

what the bot does:
1. switch to healers window and heal dummy
2. switch to shooters window and shoot
3. switch to healers window and heal dummy
4. switch to shooter and kill the dummy
5. switch to healers window and revive dummy
6. stuck because dummy doesn't get revived
(of course not because i just registered the healers accept-button)

I think the error is, that the healer does crouch all the time.
But i get the "weapon disabled" thingy anyway.
(i guess it is because i used the same race, what doesn't solve the bot thing)

Here a picture:
[Only registered and activated users can see links. Click Here To Register...]

11/26/2013 21:55 butter123#13

Quote:

Originally Posted by Eltarion

4. switch to shooter and kill the dummy
5. switch to healers window and revive dummy
6. stuck because dummy doesn't get revived
(of course not because i just registered the healers accept-button)

Uhm you wrote again, that the dummy got killed^^
The guy you marked with the red arrow is the healer. He heals the dummy and gets the points. Then he stands up and so gets killed. Then the dummy (behind the healer) revives him. Make also shure, that you register the windows in the correct order. 1. Healer 2. Dummy 3. Shooter 4. Coordinates of healers accept buttn

11/26/2013 22:31 Eltarion#14

Quote:

Originally Posted by butter123

Uhm you wrote again, that the dummy got killed^^
The guy you marked with the red arrow is the healer. He heals the dummy and gets the points. Then he stands up and so gets killed. Then the dummy (behind the healer) revives him. Make also shure, that you register the windows in the correct order. 1. Healer 2. Dummy 3. Shooter 4. Coordinates of healers accept buttn

I marked the "equipment disabled" label ^^

It's ok, i hope other players have more luck doing this.
Thanks for your help.

11/26/2013 22:45 butter123#15

Added a picture in the spoiler. If that wont help, im sorry, i dont understand whats going wrong.

Page 1 of 10

Last »