Today I decided to make a complete guide showing how to set sucessfully L2 Net on interlude servers.
I have seen around a couple of guides, but they are a bit complicated, that's why I decided to make a new one. :pimp:
So, let's start! :mofo:
What we will need :confused:
L2 Net:
[Only registered and activated users can see links. Click Here To Register...]
DirectX:
[Only registered and activated users can see links. Click Here To Register...]
This l2.ini:
[Only registered and activated users can see links. Click Here To Register...]
Needed Configurations
1. Install DirectX, that's pretty easy I guess so.
2. Extract L2 Net.rar
3. Ok, enter in the folder now and look for "loginlist" text.
4. You must edit the last 2 lines and make it look like this for example:
L2 Server's Name => Replace it with the server's name
Servers.Ip.Goes.Here => Replace it with server's IP.
Note: In the end of the topic you can find how to take the IP.
Save it and close it.
5. Now find the "interface" text.
Scroll down and find this:
Paste instead the path of the server's system that you want to bot in.
It should look like this for example.
Note1: Make a copy of your original system just for L2 Net usage.
Note2: In this system you should paste the l2.ini you downloaded before.
Program's Configurations
Ok, we are done with the misc configurations.
Let's continue with the program's ones.
1. Run L2NET.exe, the program should open.
2. Now click on File>LogonWindow>IG
[Only registered and activated users can see links. Click Here To Register...]
3. Then find the server's name and click "Listen".
[Only registered and activated users can see links. Click Here To Register...]
4. Finally, we are ready to launch L2 by clicking on File>Launch Lineage2.
[Only registered and activated users can see links. Click Here To Register...]
Note: If you want to launch second bot you have to follow again the same steps, but you must change this:
[img]
http://i36.tinypic.com/96yud1.png[/img]
Instead of "7777", you must type "7778".
Botting Configurations
1. Let's start the botting configurations.
First of all open the Options' Window and then click Bot Options.
[Only registered and activated users can see links. Click Here To Register...]
2. Now set the values according to the images below.
Party
[Only registered and activated users can see links. Click Here To Register...]
Buffs/Heals
[Only registered and activated users can see links. Click Here To Register...]
Note: In the "Names" filed you must type your in game name.
When you have set everything don't forget to click the "Add" button.
Items
[Only registered and activated users can see links. Click Here To Register...]
Combat
[Only registered and activated users can see links. Click Here To Register...]
That's the skills part. Feel free to configure it on your own to make it fit for you.
Note: When you have set everything don't forget to click the "Add" button.
Last Steps
We are done with botting options too.
A couple of steps more and you are ready to start botting.
1. Click on Scripting>Set Script Main.
[Only registered and activated users can see links. Click Here To Register...]
2. Find the following script.
[Only registered and activated users can see links. Click Here To Register...]
3. Click Scripting>Start Script.
That's all!
Your bot should start running!
How to take the IP of a server
1. Log in the server.
2. Run the CMD.
3. Type the command
4. You can recognise it by checking for the "7777".
[Only registered and activated users can see links. Click Here To Register...]
UPDATED
How to configure your bot properly
First of all I would like to mention that I have set these values for a Treasure Hunter.
1. Go Bot Options>Combat.
2. Now take a look on the picture below.
[Only registered and activated users can see links. Click Here To Register...]
1. (ShorCut)
It's skills's shortcut(F1, F2, F3 etc).
2. (Page)
Here is the bar on which you have your skills.
3. (Delay)
That's the reuse time of each skill.
That was the most important part.
Now, just turn off the Buffs/Heals and in the Items check the screen above.
Thanks for reading the guide.
If you would like to mention something missing do not hesitate to post.
THIS GUIDE IS NOT DONE BY ME, ALL I DID WAS TO PUT IN THE CODES. BUT ITS A GR8 FOUND. ENJOY! :handsdown:
I have seen around a couple of guides, but they are a bit complicated, that's why I decided to make a new one. :pimp:
So, let's start! :mofo:
What we will need :confused:
L2 Net:
[Only registered and activated users can see links. Click Here To Register...]
DirectX:
[Only registered and activated users can see links. Click Here To Register...]
This l2.ini:
[Only registered and activated users can see links. Click Here To Register...]
Needed Configurations
1. Install DirectX, that's pretty easy I guess so.
2. Extract L2 Net.rar
3. Ok, enter in the folder now and look for "loginlist" text.
4. You must edit the last 2 lines and make it look like this for example:
Code:
Official NA Login 216.107.242.199 Offical NA PTS 216.107.242.195 Official SEA Login 116.68.136.61 L2 Server's Name Servers.Ip.Goes.Here
Servers.Ip.Goes.Here => Replace it with server's IP.
Note: In the end of the topic you can find how to take the IP.
Save it and close it.
5. Now find the "interface" text.
Scroll down and find this:
Code:
C:\Program Files\Lineage II\L2net system\L2.exe
It should look like this for example.
Code:
C:\Program Files\Lineage II\L2Server'sName\L2.exe
Note1: Make a copy of your original system just for L2 Net usage.
Note2: In this system you should paste the l2.ini you downloaded before.
Program's Configurations
Ok, we are done with the misc configurations.
Let's continue with the program's ones.
1. Run L2NET.exe, the program should open.
2. Now click on File>LogonWindow>IG
[Only registered and activated users can see links. Click Here To Register...]
3. Then find the server's name and click "Listen".
[Only registered and activated users can see links. Click Here To Register...]
4. Finally, we are ready to launch L2 by clicking on File>Launch Lineage2.
[Only registered and activated users can see links. Click Here To Register...]
Note: If you want to launch second bot you have to follow again the same steps, but you must change this:
[img]
http://i36.tinypic.com/96yud1.png[/img]
Instead of "7777", you must type "7778".
Botting Configurations
1. Let's start the botting configurations.
First of all open the Options' Window and then click Bot Options.
[Only registered and activated users can see links. Click Here To Register...]
2. Now set the values according to the images below.
Party
[Only registered and activated users can see links. Click Here To Register...]
Buffs/Heals
[Only registered and activated users can see links. Click Here To Register...]
Note: In the "Names" filed you must type your in game name.
When you have set everything don't forget to click the "Add" button.
Items
[Only registered and activated users can see links. Click Here To Register...]
Combat
[Only registered and activated users can see links. Click Here To Register...]
That's the skills part. Feel free to configure it on your own to make it fit for you.
Note: When you have set everything don't forget to click the "Add" button.
Last Steps
We are done with botting options too.
A couple of steps more and you are ready to start botting.
1. Click on Scripting>Set Script Main.
[Only registered and activated users can see links. Click Here To Register...]
2. Find the following script.
[Only registered and activated users can see links. Click Here To Register...]
3. Click Scripting>Start Script.
That's all!
Your bot should start running!
How to take the IP of a server
1. Log in the server.
2. Run the CMD.
3. Type the command
Code:
netstat -n
4. You can recognise it by checking for the "7777".
[Only registered and activated users can see links. Click Here To Register...]
UPDATED
How to configure your bot properly
First of all I would like to mention that I have set these values for a Treasure Hunter.
1. Go Bot Options>Combat.
2. Now take a look on the picture below.
[Only registered and activated users can see links. Click Here To Register...]
1. (ShorCut)
It's skills's shortcut(F1, F2, F3 etc).
2. (Page)
Here is the bar on which you have your skills.
3. (Delay)
That's the reuse time of each skill.
That was the most important part.
Now, just turn off the Buffs/Heals and in the Items check the screen above.
Thanks for reading the guide.
If you would like to mention something missing do not hesitate to post.
THIS GUIDE IS NOT DONE BY ME, ALL I DID WAS TO PUT IN THE CODES. BUT ITS A GR8 FOUND. ENJOY! :handsdown: