BELOW are the COMMON and USUAL ERRORS encountered during ZID ENGINE first RUN and it's POSSIBLE REMEDIES.
__________________________________________________ _______________
ERROR NO. 1 : DRIVER MISSING!
ERROR MESSAGE:
[Only registered and activated users can see links. Click Here To Register...]
this kind of error often OCCURS right after pressing OK when you set the SETTINGS in the EXTRA tab.
SOME do not EXPERIENCE this ERROR but MOST PEOPLE often do.
possible REMEDY:
1. just IGNORE this MESSAGE... just click OK.
2. now OPEN your GC CLIENT and ATTACH your MAIN.EXE to your UCE.
3. if you got DETECTED.
GO TO ERROR NO. 2 and its possible REMEDY
__________________________________________________ _______________
ERROR NO. 2 : DETECTED!
ERROR MESSAGE:
[Only registered and activated users can see links. Click Here To Register...]
this is the most usual error encountered during the first run.
possible REMEDY:
1. make SURE you have all other ENGINES deleted EXCEPT ZidEngineU
2. once more GO to C:\WINDOWS\PREFETCH\ and PRESS CTRL + A then SHIFT + DELETE
(to delete all files permanently).
3. now give your PC another refreshing REBOOT/RESTART..
after doing so... you should no longer be detected... but it won't scan value and won't return address...
proceed to ERROR NO. 3 and it's possible REMEDY
__________________________________________________ _______________
ERROR NO. 3 : UNDETECTED but WON'T SCAN a VALUE and WON'T return any ADDRESS.
possible REMEDY:
1. CLOSE your GC CLIENT and your UCE as well.
2. just give your PC another REBOOT/RESTART.
3. now REDO the BYPASSING ADS PROCEDURES in this [Only registered and activated users can see links. Click Here To Register...] but this time you have to skip STEP no. 5 do not DOUBLE-CLICK the CEREGRESET.EXE from now on (this maybe the reason why you keep on receiving error message you always reset and set the settings) just proceed to the step no. 6... the DOUBLE-CLICK the UCE.EXE part.
5. now try REOPENING your GC CLIENT and REATTACHING the MAIN.EXE to your UCE.
6. this time it should no longer be DETECTED and you can also be able to SCAN VALUES and will now return ADDRESSES.
if after doing the above steps and you still can't scan a value or the uce still wont return address do this.
EDITED: CREDITS to my IDOL ms. unforgiven094
1.run KERNELMODULEUNLOADER.EXE, SYSTEMRETRIEVER.EXE (attachment files can be downloaded below for those who have already deleted other engines, just extract the file then run it.)
NOTE: if you have KERNEL1DATA.DAT or KERNEL_DATA.DAT just copy it and paste in inside the zid folder then compress the folder again.
2. now give your PC another REBOOT/RESTART.
4. now REDO the BYPASSING ADS PROCEDURES in this [Only registered and activated users can see links. Click Here To Register...] but this time you have to skip STEP no. 5 do not DOUBLE-CLICK the CEREGRESET.EXE from now on (this maybe the reason why you keep on receiving error message you always reset and set the settings) just proceed to the step no. 6... the DOUBLE-CLICK the UCE.EXE part.
__________________________________________________ _______________
i just hope this would clarify all the questions with regards to the ZID ENGINE matter.
QUESTIONS, COMMENTS, SUGGESTIONS, CRITICISM, VIOLENT REACTIONS are all very welcome with wide arms open.
i definitely know i will gain different RESPONSES and FEEDBACKS with regards to this thread...
SOME will give me POSITIVE RESPONSES
but MOST will showered me with NEGATIVE FEEDBACKS and VIOLENT REACTIONS.
SOME will be OVERWHELMED
but MOST will be MAD and will HATE me for sure.
but EITHER WAYS, i just want to state TWO THINGS here...
1. I DON'T CARE AT ALL! :mad:
2. I JUST CARE THAT'S ALL! :D
those are two different things...
and oh sorry... one more thing...
:handsdown: WORLD PEACE! :handsdown:
or you can just IGNORE this that can't be HELPED!
that's it! HAPPY ETHICAL HACKING!! :handsdown:
HOPE I HELPED!
__________________________________________________ _______________
ERROR NO. 1 : DRIVER MISSING!
ERROR MESSAGE:
[Only registered and activated users can see links. Click Here To Register...]
this kind of error often OCCURS right after pressing OK when you set the SETTINGS in the EXTRA tab.
SOME do not EXPERIENCE this ERROR but MOST PEOPLE often do.
possible REMEDY:
1. just IGNORE this MESSAGE... just click OK.
2. now OPEN your GC CLIENT and ATTACH your MAIN.EXE to your UCE.
3. if you got DETECTED.
GO TO ERROR NO. 2 and its possible REMEDY
__________________________________________________ _______________
ERROR NO. 2 : DETECTED!
ERROR MESSAGE:
[Only registered and activated users can see links. Click Here To Register...]
this is the most usual error encountered during the first run.
possible REMEDY:
1. make SURE you have all other ENGINES deleted EXCEPT ZidEngineU
2. once more GO to C:\WINDOWS\PREFETCH\ and PRESS CTRL + A then SHIFT + DELETE
(to delete all files permanently).
3. now give your PC another refreshing REBOOT/RESTART..
after doing so... you should no longer be detected... but it won't scan value and won't return address...
proceed to ERROR NO. 3 and it's possible REMEDY
__________________________________________________ _______________
ERROR NO. 3 : UNDETECTED but WON'T SCAN a VALUE and WON'T return any ADDRESS.
possible REMEDY:
1. CLOSE your GC CLIENT and your UCE as well.
2. just give your PC another REBOOT/RESTART.
3. now REDO the BYPASSING ADS PROCEDURES in this [Only registered and activated users can see links. Click Here To Register...] but this time you have to skip STEP no. 5 do not DOUBLE-CLICK the CEREGRESET.EXE from now on (this maybe the reason why you keep on receiving error message you always reset and set the settings) just proceed to the step no. 6... the DOUBLE-CLICK the UCE.EXE part.
5. now try REOPENING your GC CLIENT and REATTACHING the MAIN.EXE to your UCE.
6. this time it should no longer be DETECTED and you can also be able to SCAN VALUES and will now return ADDRESSES.
if after doing the above steps and you still can't scan a value or the uce still wont return address do this.
EDITED: CREDITS to my IDOL ms. unforgiven094
1.run KERNELMODULEUNLOADER.EXE, SYSTEMRETRIEVER.EXE (attachment files can be downloaded below for those who have already deleted other engines, just extract the file then run it.)
NOTE: if you have KERNEL1DATA.DAT or KERNEL_DATA.DAT just copy it and paste in inside the zid folder then compress the folder again.
2. now give your PC another REBOOT/RESTART.
4. now REDO the BYPASSING ADS PROCEDURES in this [Only registered and activated users can see links. Click Here To Register...] but this time you have to skip STEP no. 5 do not DOUBLE-CLICK the CEREGRESET.EXE from now on (this maybe the reason why you keep on receiving error message you always reset and set the settings) just proceed to the step no. 6... the DOUBLE-CLICK the UCE.EXE part.
__________________________________________________ _______________
i just hope this would clarify all the questions with regards to the ZID ENGINE matter.
QUESTIONS, COMMENTS, SUGGESTIONS, CRITICISM, VIOLENT REACTIONS are all very welcome with wide arms open.
i definitely know i will gain different RESPONSES and FEEDBACKS with regards to this thread...
SOME will give me POSITIVE RESPONSES
but MOST will showered me with NEGATIVE FEEDBACKS and VIOLENT REACTIONS.
SOME will be OVERWHELMED
but MOST will be MAD and will HATE me for sure.
but EITHER WAYS, i just want to state TWO THINGS here...
1. I DON'T CARE AT ALL! :mad:
2. I JUST CARE THAT'S ALL! :D
those are two different things...
and oh sorry... one more thing...
:handsdown: WORLD PEACE! :handsdown:
Quote:
The man who is anybody and who does anything and almost everything is surely going to be CRITICIZED, VILIFIED, HATED and MISUNDERSTOOD. This is part of the penalty for GREATNESS.
you can hit THANKS button if i HELPED.Quote:
To avoid CRITICISM, do NOTHING, say NOTHING, be NOTHING.
or you can just IGNORE this that can't be HELPED!
that's it! HAPPY ETHICAL HACKING!! :handsdown:
HOPE I HELPED!
