EDITED:
this is how to do the MP HACK
this is how to do the SUDDEN 1 HP / ONE HIT MONSTERS HACK
first you need to find the addresses needed for sudden death here's how.
this is how to do the SAVER HACK
to view the procedures on bypassing the ZID advertisements click the show button below.
to view the settings for MOONLIGHT ENGINE 1348, RYU ENGINE, ZID ENGINE, ALIENZUCE, please click the show button below
to view the procedures on how to make Radical Engine works please click the show button below.
NOTE: this is about the Radical Engine 7.1...
if you already have the Radical Engine 7.1that i am referring to...
well, good for you and sorry for those who don't have it.
cause i will no longer post or give any links due some critical issues...
anyway, for those who have the latter mentioned new engine...
here's how you can make it work...
it doesn't matter if you still have the zidengine, ryu engine, alienzuce, peruce in your pc...
it's ok, you don't need to delete those
now here's what you are going to do...
note: ill be using the word NEWengine7.1 to refer to that Radical Engine 7.1 so don't be confused...
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
1. extract the rar file of the NEWengine7.1 that you have there in a NEWengine7.1 folder...
(right-click the NEWengine7.1.rar > extract to NEWengine7.1 folder).
2. now from your OLDengines look for any old CT file (file with .CT extension) renamed it as HackPack.CT copy it then paste it inside the NEWengine7.1 folder together with the new UCE files.
if you don't have one don't panic... it's ok...
3. now inside the NEWengine7.1 folder open the Openfist.exe just ignore the error message like "cannot find blah blah blah...no scripting ability." just ignore it ok? Ryu Engine window will open, compare the ryu engine settings with the settings above (click show button above to view the settings) if it's the same proceed to the next step.
4. now open NEWengine7.1.exe (the one with the tank icon).
5. upon opening it a window with advertisement will pop out...
6. keep clicking on each advertisement until the open UCE button can be clicked.
7. after clicking the open UCE button, the NEWengine7.1 window will open.
8. do not change any of it's settings...
9. now open ur gc client... it will automatically attach to your UCE by default...
10. when you see the gc loading screen (the loading screen with the dark assassin silhoutte) close the OLD CE immediately... then poof! that's it...
11. login your account... and do the usual scanning procedures...
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
happy ethical hacking!
and please don't ab use.
hope i helped.
i definitely know i will gain different RESPONSES and FEEDBACKS with regards to this thread...
SOME will give me POSITIVE RESPONSES
but MOST will showered me with NEGATIVE FEEDBACKS and VIOLENT REACTIONS.
SOME will be OVERWHELMED
but MOST will be MAD and will HATE me for sure.
but EITHER WAYS, i just want to state TWO THINGS here...
1. I DON'T CARE AT ALL! :mad:
2. I JUST SHARED THAT'S ALL! :D
and oh sorry... one more thing...
:handsdown: WORLD PEACE! :handsdown:
or you can just IGNORE this that can't be HELPED!
that's it! HAPPY ETHICAL HACKING!! :handsdown:
this is how to do the MP HACK
scan type : exact value
value type : float[/COLOR][/B]
1. go to practice mode and select any character.
2. wait until mp reaches 3rd bar.
3. on your uce first scan 3
4. now do 3rd mp skill.
5. quickly next scan 0.
6. once more wait til your mp reaches 3rd bar.
7. then next scan 3.
8. double click the address then freeze it.
hope this helps!
value type : float[/COLOR][/B]
1. go to practice mode and select any character.
2. wait until mp reaches 3rd bar.
3. on your uce first scan 3
4. now do 3rd mp skill.
5. quickly next scan 0.
6. once more wait til your mp reaches 3rd bar.
7. then next scan 3.
8. double click the address then freeze it.
hope this helps!
this is how to do the SUDDEN 1 HP / ONE HIT MONSTERS HACK
first you need to find the addresses needed for sudden death here's how.
NOTE: do not use one hit hack when doing the sudden death hack in this tut, you shouldn't kill the monster.
1. on trial tower, one star, first floor first scan 1122238464 (slime's hp) after the addresses comes out hit each slime make sure you don't kill any of them after decreasing their hp change the scan type (e.g 4bytes to Decreased value) to decrease value then hit next scan from the addresses try double-clicking all addresses end in 'C' or '4' now start changing each value to 0 if the value won't change delete that address and proceed to the next one, if a slime died upon changing it's value to 0 freeze that address.
2. once more change the scan type to 4bytes hit new scan then first scan 1126891520 (goblin's hp) after the addresses comes out, hit the goblin once don't kill it then change scan type to Decreased value hit next scan now once more double-click all addresses end in 'C' or ''4' now start changing each value to 0 if the value won't change delete that address and proceed to the next one, if a the goblin died upon changing it's value to 0 freeze that address now proceed to 2nd floor.
3. after loading all monsters will die but one slime, once more change the scan type to 4bytes hit new scan then first scan 1122238464 (slime's hp) after the addresses comes out, hit the slime once don't kill it then change scan type to Decreased value hit next scan now once more double-click all addresses end in 'C' or '4 now start changing each value to 0 if the value won't change delete that address and proceed to the next one, if a the slime died upon changing it's value to 0 freeze that address. now you may proceed to 3rd floor since there's no monsters proceed to 4th floor.
4. after loading all monsters will die but one goblin, once more change the scan type to 4bytes hit new scan then first scan 1127972864 (goblin's hp) after the addresses comes out, hit the goblin once don't kill it then change scan type to Decreased value hit next scan luckily, there were only four to five addresses will come out double-click the topmost address that ends in 'C' or '4' now change it's value to 0 if the goblin died[/I] upon changing it's value to 0 freeze that address exit the game don't finish it or you'll receive a warning message.
5. proceed to Gaikoz's Castle threes stars on the cross junction of the gaikoz map Mongban will survive make sure it has no buffs or power ups (e.g super armor, restore hp, increased defense, etc.) if it has exit the game and create another room if it doesnt have any, change the scan type to 4bytes hit new scan then first scan 1154514944 (mongban's hp) again there were only four to five addresses will come out double-click the topmost address that ends in 'C' or '4' now change it's value to 0 if mongban died upon changing it's value to 0 freeze that address now exit the game don't finish it or else you'll receive a warning message.
6. proceed to Bermesiah's Last Stand one star go up, then right, after the loading all monster will die but 2 violent orcs and a stone goblin once more change the scan type to 4bytes hit new scan then first scan 1156869325 (violent orc's hp) after there will be six to seven addresses come out,[/B] now once more double-click all addresses end in 'C' or '4 now start changing each value to 0 if the value won't change delete that address and proceed to the next one, if a the violent orc died upon changing it's value to 0 freeze that address. now hit new scan then first scan 1151529779 (stone goblin's hp) after the addresses comes out, hit the goblin once don't kill it after the addresses comes out, hit the slime once don't kill it then change scan type to Decreased value hit next scan now once more double-click all addresses end in 'C' or '4 now start changing each value to 0 if the value won't change delete that address and proceed to the next one, if a the stone goblin died upon changing it's value to 0 freeze that address now exit the game.
now that you gathered all the needed addresses here's the most important thing you need to do... you have two options here...
1. freeze all the values to 1 to make all the monster's hp change to one automatically as you enter each portal... thus freezing the values to 1 may make some monsters invulnerable...
or
2. set a single hotkey on each address that will change the values to 1 once pressed... i suggest you use the letter 'Z' as your hotkey so once you hit monster automatically it's hp will drop to 1 and will die upon your hit land on them.
i recommend you use the 2nd option...
the first option is only for those engines without hotkey possibility like Radical Engine 7.1
hope this helps!
1. on trial tower, one star, first floor first scan 1122238464 (slime's hp) after the addresses comes out hit each slime make sure you don't kill any of them after decreasing their hp change the scan type (e.g 4bytes to Decreased value) to decrease value then hit next scan from the addresses try double-clicking all addresses end in 'C' or '4' now start changing each value to 0 if the value won't change delete that address and proceed to the next one, if a slime died upon changing it's value to 0 freeze that address.
2. once more change the scan type to 4bytes hit new scan then first scan 1126891520 (goblin's hp) after the addresses comes out, hit the goblin once don't kill it then change scan type to Decreased value hit next scan now once more double-click all addresses end in 'C' or ''4' now start changing each value to 0 if the value won't change delete that address and proceed to the next one, if a the goblin died upon changing it's value to 0 freeze that address now proceed to 2nd floor.
3. after loading all monsters will die but one slime, once more change the scan type to 4bytes hit new scan then first scan 1122238464 (slime's hp) after the addresses comes out, hit the slime once don't kill it then change scan type to Decreased value hit next scan now once more double-click all addresses end in 'C' or '4 now start changing each value to 0 if the value won't change delete that address and proceed to the next one, if a the slime died upon changing it's value to 0 freeze that address. now you may proceed to 3rd floor since there's no monsters proceed to 4th floor.
4. after loading all monsters will die but one goblin, once more change the scan type to 4bytes hit new scan then first scan 1127972864 (goblin's hp) after the addresses comes out, hit the goblin once don't kill it then change scan type to Decreased value hit next scan luckily, there were only four to five addresses will come out double-click the topmost address that ends in 'C' or '4' now change it's value to 0 if the goblin died[/I] upon changing it's value to 0 freeze that address exit the game don't finish it or you'll receive a warning message.
5. proceed to Gaikoz's Castle threes stars on the cross junction of the gaikoz map Mongban will survive make sure it has no buffs or power ups (e.g super armor, restore hp, increased defense, etc.) if it has exit the game and create another room if it doesnt have any, change the scan type to 4bytes hit new scan then first scan 1154514944 (mongban's hp) again there were only four to five addresses will come out double-click the topmost address that ends in 'C' or '4' now change it's value to 0 if mongban died upon changing it's value to 0 freeze that address now exit the game don't finish it or else you'll receive a warning message.
6. proceed to Bermesiah's Last Stand one star go up, then right, after the loading all monster will die but 2 violent orcs and a stone goblin once more change the scan type to 4bytes hit new scan then first scan 1156869325 (violent orc's hp) after there will be six to seven addresses come out,[/B] now once more double-click all addresses end in 'C' or '4 now start changing each value to 0 if the value won't change delete that address and proceed to the next one, if a the violent orc died upon changing it's value to 0 freeze that address. now hit new scan then first scan 1151529779 (stone goblin's hp) after the addresses comes out, hit the goblin once don't kill it after the addresses comes out, hit the slime once don't kill it then change scan type to Decreased value hit next scan now once more double-click all addresses end in 'C' or '4 now start changing each value to 0 if the value won't change delete that address and proceed to the next one, if a the stone goblin died upon changing it's value to 0 freeze that address now exit the game.
now that you gathered all the needed addresses here's the most important thing you need to do... you have two options here...
1. freeze all the values to 1 to make all the monster's hp change to one automatically as you enter each portal... thus freezing the values to 1 may make some monsters invulnerable...
or
2. set a single hotkey on each address that will change the values to 1 once pressed... i suggest you use the letter 'Z' as your hotkey so once you hit monster automatically it's hp will drop to 1 and will die upon your hit land on them.
i recommend you use the 2nd option...
the first option is only for those engines without hotkey possibility like Radical Engine 7.1
hope this helps!
this is how to do the SAVER HACK
scan type : exact value
value type : 4 bytes
1. go to practice mode and select arme's first job the mage...
2. first scan 50
3. now repick character and select arme's third job the warlock...
4. now next scan 0...
5. look for the first black address right after the green addresses...
6. double click it then freeze the value to 1500.
value type : 4 bytes
1. go to practice mode and select arme's first job the mage...
2. first scan 50
3. now repick character and select arme's third job the warlock...
4. now next scan 0...
5. look for the first black address right after the green addresses...
6. double click it then freeze the value to 1500.
to view the procedures on bypassing the ZID advertisements click the show button below.
ok here's the compilations and complete tutorial on how to bypass zid advertisements and how to make it work undetected...
ofcourse you must have the right engine...
you can DL it in other threads...
(check out your documents, shared documents and even recycle bin)
2. delete all the files in the prefetch folder which can be found in c:\windows\prefetch
3. better restart your pc first before proceeding to the next step.
i just made it more comprehensive.
1. right-click the zidengineu.rar then click open as shown in the picture.
[Only registered and activated users can see links. Click Here To Register...]
2. after clicking open an evaluation copy window will pop up as shown.
[Only registered and activated users can see links. Click Here To Register...]
3. now right-click the zidengineu.exe then click view file as shown. (you can also just click it once then press alt + V)
[Only registered and activated users can see links. Click Here To Register...]
4. after clicking view file a new evaluation copy window will appear as shown.
[Only registered and activated users can see links. Click Here To Register...]
5. now from the list of contents look for the ceregreset.exe double-click it and press ok as shown.
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
NOTE : skip this ceregreset.exe part when you succesfully set the settings there's no need to run the ceregreset.exe when reopening the zidengine just proceed to the next step.
6. now look for the uce.exe once located double-click it and skip the tutorial by pressing no as shown.
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
7. that's it the zidengine.exe will now open as shown.
[Only registered and activated users can see links. Click Here To Register...]
credits to miss unforgiven094
ofcourse you must have the right engine...
you can DL it in other threads...
1. delete all other engines except from the right engine i am referring to.Quote:
note: before doing the below procedure here are the three things you need to make sure.
(check out your documents, shared documents and even recycle bin)
2. delete all the files in the prefetch folder which can be found in c:\windows\prefetch
3. better restart your pc first before proceeding to the next step.
credits to threadsoffateQuote:
now let's proceed with bypassing the advertisements
i just made it more comprehensive.
1. right-click the zidengineu.rar then click open as shown in the picture.
[Only registered and activated users can see links. Click Here To Register...]
2. after clicking open an evaluation copy window will pop up as shown.
[Only registered and activated users can see links. Click Here To Register...]
3. now right-click the zidengineu.exe then click view file as shown. (you can also just click it once then press alt + V)
[Only registered and activated users can see links. Click Here To Register...]
4. after clicking view file a new evaluation copy window will appear as shown.
[Only registered and activated users can see links. Click Here To Register...]
5. now from the list of contents look for the ceregreset.exe double-click it and press ok as shown.
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
NOTE : skip this ceregreset.exe part when you succesfully set the settings there's no need to run the ceregreset.exe when reopening the zidengine just proceed to the next step.
6. now look for the uce.exe once located double-click it and skip the tutorial by pressing no as shown.
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
7. that's it the zidengine.exe will now open as shown.
[Only registered and activated users can see links. Click Here To Register...]
this tut was somehow based on the settings of miss unforgiven094 only with a little bit difference cause i changed some of the settings for those experiencing a problem of undetection but no addresses were found.Quote:
now let's proceed with the key of undetection
credits to miss unforgiven094
to view the settings for MOONLIGHT ENGINE 1348, RYU ENGINE, ZID ENGINE, ALIENZUCE, please click the show button below
this settings is applicable for :
ZID ENGINE
RYU ENGINE
ALIENZUCEPERUUCE and
MOONLIGHT ENGINE 1348.
1. first go to settings.
2. the general settings should look like this.
[Only registered and activated users can see links. Click Here To Register...]
3. the scan settings should look like this.
[Only registered and activated users can see links. Click Here To Register...]
4. the code finder settings should look like this.
[Only registered and activated users can see links. Click Here To Register...]
5. the assembler settings should look like this.
[Only registered and activated users can see links. Click Here To Register...]
6. and finally, the extra settings should look exactly like this.
[Only registered and activated users can see links. Click Here To Register...]
just give your pc another REBOOT for a smooth game play and to let your pc adjusts...
experiencing errors with this settings?
check this out [Only registered and activated users can see links. Click Here To Register...]
i just hope this would clarify all the questions with regards to the ZID ENGINE matter.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
ZID ENGINE
RYU ENGINE
ALIENZUCEPERUUCE and
MOONLIGHT ENGINE 1348.
1. first go to settings.
2. the general settings should look like this.
[Only registered and activated users can see links. Click Here To Register...]
3. the scan settings should look like this.
[Only registered and activated users can see links. Click Here To Register...]
4. the code finder settings should look like this.
[Only registered and activated users can see links. Click Here To Register...]
5. the assembler settings should look like this.
[Only registered and activated users can see links. Click Here To Register...]
6. and finally, the extra settings should look exactly like this.
[Only registered and activated users can see links. Click Here To Register...]
just give your pc another REBOOT for a smooth game play and to let your pc adjusts...
experiencing errors with this settings?
check this out [Only registered and activated users can see links. Click Here To Register...]
i just hope this would clarify all the questions with regards to the ZID ENGINE matter.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
NOTE: this is about the Radical Engine 7.1...
if you already have the Radical Engine 7.1that i am referring to...
well, good for you and sorry for those who don't have it.
cause i will no longer post or give any links due some critical issues...
anyway, for those who have the latter mentioned new engine...
here's how you can make it work...
it doesn't matter if you still have the zidengine, ryu engine, alienzuce, peruce in your pc...
it's ok, you don't need to delete those
now here's what you are going to do...
note: ill be using the word NEWengine7.1 to refer to that Radical Engine 7.1 so don't be confused...
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
1. extract the rar file of the NEWengine7.1 that you have there in a NEWengine7.1 folder...
(right-click the NEWengine7.1.rar > extract to NEWengine7.1 folder).
2. now from your OLDengines look for any old CT file (file with .CT extension) renamed it as HackPack.CT copy it then paste it inside the NEWengine7.1 folder together with the new UCE files.
if you don't have one don't panic... it's ok...
3. now inside the NEWengine7.1 folder open the Openfist.exe just ignore the error message like "cannot find blah blah blah...no scripting ability." just ignore it ok? Ryu Engine window will open, compare the ryu engine settings with the settings above (click show button above to view the settings) if it's the same proceed to the next step.
4. now open NEWengine7.1.exe (the one with the tank icon).
5. upon opening it a window with advertisement will pop out...
6. keep clicking on each advertisement until the open UCE button can be clicked.
7. after clicking the open UCE button, the NEWengine7.1 window will open.
8. do not change any of it's settings...
9. now open ur gc client... it will automatically attach to your UCE by default...
10. when you see the gc loading screen (the loading screen with the dark assassin silhoutte) close the OLD CE immediately... then poof! that's it...
11. login your account... and do the usual scanning procedures...
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
happy ethical hacking!
and please don't ab use.
hope i helped.
i definitely know i will gain different RESPONSES and FEEDBACKS with regards to this thread...
SOME will give me POSITIVE RESPONSES
but MOST will showered me with NEGATIVE FEEDBACKS and VIOLENT REACTIONS.
SOME will be OVERWHELMED
but MOST will be MAD and will HATE me for sure.
but EITHER WAYS, i just want to state TWO THINGS here...
1. I DON'T CARE AT ALL! :mad:
2. I JUST SHARED THAT'S ALL! :D
and oh sorry... one more thing...
:handsdown: WORLD PEACE! :handsdown:
Quote:
The man who is anybody and who does anything and almost everything is surely going to be CRITICIZED, VILIFIED, HATED and MISUNDERSTOOD. This is part of the penalty for GREATNESS.
you can hit THANKS button if i HELPED.Quote:
To avoid CRITICISM, do NOTHING, say NOTHING, be NOTHING.
or you can just IGNORE this that can't be HELPED!
that's it! HAPPY ETHICAL HACKING!! :handsdown:
