Moon Light Engine 1348 (rev 1348)/ RYU Engine/ ZID Engine Settings (APPLICABLE TO OPENFIST FILE of RADICAL Engine 7.1)
You can also download MLE 1348 REV (See attachment below) or go straight to sticky thread of Mod Chi to get the file. ^_^
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NO SCREENIES Okay?? I'm going to post instead the settings so just follow below steps: (these are the fields with checkmarks in ur CE) If you will experience issues/problems, feel free to post here or related thread so we can come up to resolution.
NOTE: This may not work on Vista
GENERAL SETTINGS:
◘ Show Undo Button
◘ Show Advanced Options
◘ Update the list of found addresses even after scanning
◘ Center cheat engine when bringing to front
◘ Hide some/all windows instead of trying ....
◘ Show main menu (N/A on MLE1348)
◘ Get process icons for process list (N/A on MLE1348)
..............automatically attach the processes named [main.exe]
SCAN SETTINGS:
◘ Enable hyperscan when possible (N/A on MLE1348)
◘ MEM_PRIVATE: Memory that is private
◘ MEM_IMAGE:Memory that is mapped into the view of an image section
CODE FINDER:
◘ Use Debug Registers (AKA Hardware Breakpoints)
◘ Try to prevent detection of the debugger
ASSEMBLER OPTIONS:
◘ Show disassembler
◘ Show debugger options
◘ Use hardware breakpoints [Max 3]
◘ Replace incomplete opcodes with nops
◘ Ask for replace with nop
◘ Try to prevent detection of the debugger
EXTRA:
◘Query memory region routines
◘Read/Write Process Memory
◘Open Process
As per Mod Chi's Suggestion:
[Only registered and activated users can see links. Click Here To Register...]
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++
LATEST WORKING CE: RADICAL 7.1 CHEAT ENGINE SETTINGS
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++
EDIT 5: Since everyone here is trying to figure out how to make Radical Engine 7.1 work.. follow bellow steps... (This is the procedure that Im doing currently and actually worked for me.) For those who want the file itself, as you've requested, dload the attachment below.. ^_^
◘ EXTRACT THE RADICAL ENGINE.RAR FILE YOU DOWNLOADED
◘ OPEN OPENFIST FILE (CHECK THE SETTINGS. MAKE SURE IT'LL MATCH TO YOUR OLD MLE/ZID/RYU...OR APPLY THE SETTINGS THAT IS POSTED BELOW)
Tip: A pop up message may appear " " to run kerneldataretriever program blahblah" just click yes 2x then pop-up Ryu Engine Protect Hacker Click Ok
◘ DO NOT CLOSE YET OPENFIRST FILE, THEN OPEN RADICAL ENGINE 7.1 FILE
◘ AN ERROR/POP UP MAY APPEAR. DONT MIND IT.
◘ CLICK 5 ADS
◘ AN ERROR/POP UP MAY APPEAR. DONT MIND IT. (* pop up error message about hackpack.ct -"the system cannot find the file specified - just press enter Once Radical is open, double check settings.. kindly check below data..
General Settings
‡ Show undo button
‡ Update the list of found addresses even after scanning
‡ Center PeruUCE when bringing to front
‡ Hide some/all windows instead of trying...
Scan Settings
‡ MEM_Private
‡ MEM_Image
‡ Run scan in seperate thread
File Associations
‡ .CT
‡ .CET
‡ .CT2
‡ .CTCNM4
Code Finder
‡ Use Debug Registers
ASSEMBLER OPTIONS
‡ Show disassembler
‡ Show debugger options
‡ Use hardware breakpoints [Max 3]
‡ Replace incomplete opcodes with nops
‡ Ask for replace with nop
EXTRA:
‡ Query memory region routines
‡ Read/Write Process Memory
‡ Open Process
◘ IF AN ERROR WILL APPEAR JUST HIT ENTER THEN PROCEED LAUNCHING GC CLIENT
◘ ONCE YOU SEE THE GC CLIENT LOADING OR EVEN AFTER GG SPLASH, CLOSE OPENFIST.
◘ LOG IN AND DO UR USUAL SCANNING PROCEDURES..
ISSUES:
NO READABLE MEMORY FOUND:
What I did, right after I extracted .rar file, I backed up primeramemoria.tmp. file. Cuz I noticed, primeramemoria.tmp. became 1kb once i opened openfist.
Then once I closed openfist and opened radical, I put the primeramemoria.tmp file to radical folder to replace the 1kb primeramemoria.tmp that was in there. I did it just one time and its all set.
everytime na bubuksan ung OpenFirst ucc12.dll was not found nkalagay..
A: ur problem is very easy to resolve. just look for ucc12.dll from your previous ryu or zid engine folder then copy paste it to radical folder. but normally u can just ignore that, but if you're irritated to see that pop up, follow the resolution i provided.
TIP2: Allwin Hotkeys is not working on this engine. Just manually set them to zero after 2MP bars...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
EDIT 4: AS OF JULY 16, 2009 RYU/ZID AND OTHER KNOWN UCE HAS ALREADY BEEN DETECTED DUE TO LATEST GG PATCH. THE RYU/ZID FILE WILL NO LONGER WORK AS OF THIS TIME. (***DELETED RYU FILE ATTACHMENT BELOW***) WE WILL SEE IF WE CAN RELEASE A NEW UNDETECTED CE.. FOR NOW...NO WORKING UCE..
EDIT 3: Just in case u might want to try RYU Engine, u may download this file from here and apply below settings..
EDIT 2: REPOSTING ON THE RIGHT SECTION (Sorry Mod Chi... ~_~)
EDIT1: Modifying the post... I'm sorry guys... I had to delete the screenshots already due to warning i received (thanks for the person who PMed me)... Lucky for those who WERE able to view it...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PLS USE BELOW UCE's RESPONSIBLY. DONT USE IN PUBLIC PVP, PUT PASSWORDS ON YOUR ROOMS AND ONLY PLAY WITHUR FRIENDS. AND LASTLY, DONT SHARE TO ANYONE THAT U DONT KNOW, AND WORST THING TO DO IS TO SELL IT.
JUST DONT FORGET TO HIT THANKS IF MY POST HELPED A LOT.
Happy hacking Guys! :D
You can also download MLE 1348 REV (See attachment below) or go straight to sticky thread of Mod Chi to get the file. ^_^
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NO SCREENIES Okay?? I'm going to post instead the settings so just follow below steps: (these are the fields with checkmarks in ur CE) If you will experience issues/problems, feel free to post here or related thread so we can come up to resolution.
NOTE: This may not work on Vista
GENERAL SETTINGS:
◘ Show Undo Button
◘ Show Advanced Options
◘ Update the list of found addresses even after scanning
◘ Center cheat engine when bringing to front
◘ Hide some/all windows instead of trying ....
◘ Show main menu (N/A on MLE1348)
◘ Get process icons for process list (N/A on MLE1348)
..............automatically attach the processes named [main.exe]
SCAN SETTINGS:
◘ Enable hyperscan when possible (N/A on MLE1348)
◘ MEM_PRIVATE: Memory that is private
◘ MEM_IMAGE:Memory that is mapped into the view of an image section
CODE FINDER:
◘ Use Debug Registers (AKA Hardware Breakpoints)
◘ Try to prevent detection of the debugger
ASSEMBLER OPTIONS:
◘ Show disassembler
◘ Show debugger options
◘ Use hardware breakpoints [Max 3]
◘ Replace incomplete opcodes with nops
◘ Ask for replace with nop
◘ Try to prevent detection of the debugger
EXTRA:
◘Query memory region routines
◘Read/Write Process Memory
◘Open Process
As per Mod Chi's Suggestion:
[Only registered and activated users can see links. Click Here To Register...]Quote:
for fast settings,double click the "Clear MoonLight Engine registry.reg" after that double click "MoonLight Engine 1236.reg" then your done
[Only registered and activated users can see links. Click Here To Register...]
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++
LATEST WORKING CE: RADICAL 7.1 CHEAT ENGINE SETTINGS
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++
EDIT 5: Since everyone here is trying to figure out how to make Radical Engine 7.1 work.. follow bellow steps... (This is the procedure that Im doing currently and actually worked for me.) For those who want the file itself, as you've requested, dload the attachment below.. ^_^
◘ EXTRACT THE RADICAL ENGINE.RAR FILE YOU DOWNLOADED
◘ OPEN OPENFIST FILE (CHECK THE SETTINGS. MAKE SURE IT'LL MATCH TO YOUR OLD MLE/ZID/RYU...OR APPLY THE SETTINGS THAT IS POSTED BELOW)
Tip: A pop up message may appear " " to run kerneldataretriever program blahblah" just click yes 2x then pop-up Ryu Engine Protect Hacker Click Ok
◘ DO NOT CLOSE YET OPENFIRST FILE, THEN OPEN RADICAL ENGINE 7.1 FILE
◘ AN ERROR/POP UP MAY APPEAR. DONT MIND IT.
◘ CLICK 5 ADS
◘ AN ERROR/POP UP MAY APPEAR. DONT MIND IT. (* pop up error message about hackpack.ct -"the system cannot find the file specified - just press enter Once Radical is open, double check settings.. kindly check below data..
General Settings
‡ Show undo button
‡ Update the list of found addresses even after scanning
‡ Center PeruUCE when bringing to front
‡ Hide some/all windows instead of trying...
Scan Settings
‡ MEM_Private
‡ MEM_Image
‡ Run scan in seperate thread
File Associations
‡ .CT
‡ .CET
‡ .CT2
‡ .CTCNM4
Code Finder
‡ Use Debug Registers
ASSEMBLER OPTIONS
‡ Show disassembler
‡ Show debugger options
‡ Use hardware breakpoints [Max 3]
‡ Replace incomplete opcodes with nops
‡ Ask for replace with nop
EXTRA:
‡ Query memory region routines
‡ Read/Write Process Memory
‡ Open Process
◘ IF AN ERROR WILL APPEAR JUST HIT ENTER THEN PROCEED LAUNCHING GC CLIENT
◘ ONCE YOU SEE THE GC CLIENT LOADING OR EVEN AFTER GG SPLASH, CLOSE OPENFIST.
◘ LOG IN AND DO UR USUAL SCANNING PROCEDURES..
ISSUES:
NO READABLE MEMORY FOUND:
What I did, right after I extracted .rar file, I backed up primeramemoria.tmp. file. Cuz I noticed, primeramemoria.tmp. became 1kb once i opened openfist.
Then once I closed openfist and opened radical, I put the primeramemoria.tmp file to radical folder to replace the 1kb primeramemoria.tmp that was in there. I did it just one time and its all set.
everytime na bubuksan ung OpenFirst ucc12.dll was not found nkalagay..
A: ur problem is very easy to resolve. just look for ucc12.dll from your previous ryu or zid engine folder then copy paste it to radical folder. but normally u can just ignore that, but if you're irritated to see that pop up, follow the resolution i provided.
TIP2: Allwin Hotkeys is not working on this engine. Just manually set them to zero after 2MP bars...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
EDIT 4: AS OF JULY 16, 2009 RYU/ZID AND OTHER KNOWN UCE HAS ALREADY BEEN DETECTED DUE TO LATEST GG PATCH. THE RYU/ZID FILE WILL NO LONGER WORK AS OF THIS TIME. (***DELETED RYU FILE ATTACHMENT BELOW***) WE WILL SEE IF WE CAN RELEASE A NEW UNDETECTED CE.. FOR NOW...NO WORKING UCE..
EDIT 3: Just in case u might want to try RYU Engine, u may download this file from here and apply below settings..
EDIT 2: REPOSTING ON THE RIGHT SECTION (Sorry Mod Chi... ~_~)
EDIT1: Modifying the post... I'm sorry guys... I had to delete the screenshots already due to warning i received (thanks for the person who PMed me)... Lucky for those who WERE able to view it...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PLS USE BELOW UCE's RESPONSIBLY. DONT USE IN PUBLIC PVP, PUT PASSWORDS ON YOUR ROOMS AND ONLY PLAY WITHUR FRIENDS. AND LASTLY, DONT SHARE TO ANYONE THAT U DONT KNOW, AND WORST THING TO DO IS TO SELL IT.
JUST DONT FORGET TO HIT THANKS IF MY POST HELPED A LOT.
Happy hacking Guys! :D
