Zeilenumbruch in Fenster

MsgBox(3, "text", "text"
wie mache ich im zweiten text zeilenumbrüche?

Quote:

Originally Posted by StreetFlame MsgBox(3, "text", "text" wie mache ich im zweiten text zeilenumbrüche?

MsgBox(3, "text", "text"&@CRLF&"text2")

thx

ähm und wie zentriert man den text?

ach und ähm wie lässt man nen bot etwas per email schicken?

Quote:

Originally Posted by StreetFlame thx ähm und wie zentriert man den text? ach und ähm wie lässt man nen bot etwas per email schicken?

per email schicken ? Das hört sich aber stark nach nicht ganz legalen Zielen an ;-)

zentrieren , weiß ich jetzt nicht auswendig zum notfall musst es mit leerzeichen machen ;-)

will email spammbot machen um mein freund zu nerven und in jeder text datei steht ein wort:

email1: hallo
2: du
3: kleiner
4: man

Quote:

Originally Posted by StreetFlame will email spammbot machen um mein freund zu nerven und in jeder text datei steht ein wort: email1: hallo 2: du 3: kleiner 4: man

Email vershicken , geht mit diesen befehlen :

_INetSmtpMail
_INetMail

Welcher der richtige für dich ist , musst du selbst herausfinden .
Das nächstemal schau bitte in der in AutoIT beiliegenden Hilfe nach ...

@LF reicht auch vollkommen aus

die unterschiede liegen zwischen Chr(10) und Chr(13)

sollte aber in deinem fall keine auswirkungen haben

Quote:

Originally Posted by Shadow992 Email vershicken , geht mit diesen befehlen : _INetSmtpMail _INetMail Welcher der richtige für dich ist , musst du selbst herausfinden . Das nächstemal schau bitte in der in AutoIT beiliegenden Hilfe nach ...

wo gibt man denn da die email ein an die das geschickt werden soll :P

Quote:

Originally Posted by FaRiiDBaNG wo gibt man denn da die email ein an die das geschickt werden soll :P

Lern doch bitte den Helpfile zu benutzen -.-

Quote:

#include <INet.au3> _INetMail ( $s_MailTo, $s_MailSubject, $s_MailBody ) Parameters $s_MailTo Address for the E-Mail $s_MailSubject Subject for the E-Mail $s_MailBody Body for the E-Mail

Quote:

#include <INet.au3> _INetSmtpMail ( $s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress [,$s_Subject [,$as_Body [,$s_helo, [,$s_first [,$b_trace]]]]]) Parameters $s_SmtpServer Smtp server the eMail is to be sent though May be either alpha or a numeric IP address. In order to fight spam, many ISPs require this to be their server. eg "smtp.ispdomain.com", "mail.ispdomain.com" or "192.168.1.1" $s_FromName The name you wish the message to appear to be sent from. eg "Bob Smith" $s_FromAddress The email address you wish the message to appear to be sent from. eg "[Only registered and activated users can see links. Click Here To Register...]". $s_ToAddress The email address the message is to go to. eg "[Only registered and activated users can see links. Click Here To Register...]" $s_Subject [optional] The subject of the email. $as_Body [optional] The body of the email as a single dimensional array of strings. Each value in the array will be terminated with a @CRLF in the email. $s_helo [optional] identifier for the smtp server connection (by default @ComputerName). If Smtp server require a "EHLO" string just set the string to "EHLO " & @ComputerName. $s_first [optional] string sent before helo for the smtp server connection (by default {SPACE}). To not send any character this parameter must equal -1, some SMTP server required it. $b_trace [optional] trace the dialog in a splash window

obwohl ich, dass ers sowieso nie hinkriegen würde trotzdem hier.

Quote:

#Include<file.au3> ;################################## ; Variables ;################################## $SmtpServer = "" ; address for the smtp-server to use - REQUIRED $FromName = "" ; name from who the email was sent $FromAddress = "" ; address from where the mail should come $ToAddress = "" ; destination address of the email - REQUIRED $Subject = "" ; subject from the email - can be anything you want it to be $Body = "" ; the messagebody from the mail - can be left blank but then you get a blank mail $AttachFiles = "" ; the file you want to attach- leave blank if not needed $CcAddress = "" ; address for cc - leave blank if not needed $BccAddress = "" ; address for bcc - leave blank if not needed $Importance = "" ; Send message priority: "High", "Normal", "Low" $Username = "" ; username for the account used from where the mail gets sent - REQUIRED $Password = "" ; password for the account used from where the mail gets sent - REQUIRED $IPPort = 25 ; port used for sending the mail $ssl = 0 ; enables/disables secure socket layer sending - put to 1 if using httpS ;~ $IPPort=465 ; GMAIL port used for sending the mail ;~ $ssl=1 ; GMAILenables/disables secure socket layer sending - put to 1 if using httpS ;################################## ; Script ;################################## Global $oMyRet[2] Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc") $rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl) If @error Then MsgBox(0, "Error sending message", "Error code:" & @error & " Description:" & $rc) EndIf ; ; The UDF Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0) Local $objEmail = ObjCreate("CDO.Message") $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>' $objEmail.To = $s_ToAddress Local $i_Error = 0 Local $i_Error_desciption = "" If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress $objEmail.Subject = $s_Subject If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then $objEmail.HTMLBody = $as_Body Else $objEmail.Textbody = $as_Body & @CRLF EndIf If $s_AttachFiles <> "" Then Local $S_Files2Attach = StringSplit($s_AttachFiles, ";") For $x = 1 To $S_Files2Attach[0] $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x]) ConsoleWrite('@@ Debug(62) : $S_Files2Attach = ' & $S_Files2Attach & @LF & '>Error code: ' & @error & @LF) ;### Debug Console If FileExists($S_Files2Attach[$x]) Then $objEmail.AddAttachment ($S_Files2Attach[$x]) Else ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF) SetError(1) Return 0 EndIf Next EndIf $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer If Number($IPPort) = 0 then $IPPort = 25 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort ;Authenticated SMTP If $s_Username <> "" Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password EndIf If $ssl Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True EndIf ;Update settings $objEmail.Configuration.Fields.Update ; Set Email Importance Switch $s_Importance Case "High" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High" Case "Normal" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal" Case "Low" $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low" EndSwitch $objEmail.Fields.Update ; Sent the Message $objEmail.Send If @error Then SetError(2) Return $oMyRet[1] EndIf $objEmail="" EndFunc ;==>_INetSmtpMailCom ; ; ; Com Error Handler Func MyErrFunc() $HexNumber = Hex($oMyError.number, 8) $oMyRet[0] = $HexNumber $oMyRet[1] = StringStripWS($oMyError.description, 3) ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF) SetError(1); something to check for when this function returns Return EndFunc ;==>MyErrFunc

das ist eine e-mail udf.
_INetSmtpMail funktioniert nicht.