Complete guide to Agbot:
step 1 : Downloading the necessities:
[Only registered and activated users can see links. Click Here To Register...]
Run the installation and click yes continue etc,in the end just click ok,ok,ok,ok and finally yes
step 2:
You can use nuconnector or srproxy(if you run srproxy tick revbot compatability),after that start agbot,and finally start loader,which needs to be setup like this:
[Only registered and activated users can see links. Click Here To Register...]
1st use with Srproxy+agbot+loader
2nd use with Nuconnector+agbot+loader
it’s basicly the same,they only difference is that agbot works slightly faster with nuconnector than srproxy,but is more stable with srproxy.
The FULL AgBot guide:
When agbot is started for the first time there will be the config selection,just click select.Next click on the big config
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
Now we have here some of the most important settings,I will explain each one:
[Only registered and activated users can see links. Click Here To Register...]
1-Here you choose how your bot will behave for specific situations(normal,when in berserker mode,and when the berserker gauge is full but not yet activated)
2-Monster type to attack-here you choose what type of monster will your bot attack (if you are Europe I suggest you untick party monsters
3-Kill high HP monster first –when ticked the bot will kill the monster that has most HP and is attacking you,for instance if you are attacked by a giant and a normal monster the bot will first kill the giant then the normal monster
KS Player-KS=Kill steal, which means when this is ticked the bot will steal kills from other players, kill their mobs that they damaged
Select high HP monster first-When the bot chooses its target to attack it will choose preferably a stronger monster than a lower grade, for instance if this is ticked and a giant is standing near a normal monster, the bot will attack the giant
4- Pick other player item-bot picks up items from other players mobs
5- Pick item only if no monster attacking you- when this is ticked the bot will pickup items when no mobs are attacking it
6-Pick only valuable item-The bot will pick up only blue and sos,som,sosun items
7-Pick other player valuable item- The bot will pickup other players bluer or sos,som,sosun items
8- Monster LVL Range-defines the lvl range of monsters the bot should attack, which means if the first number is 5 it will not attack any monsters that are below lvl 5 and if the second number is 20 it will not attack any monsters that are above lvl 20
9-Cast berserk(defines when the berserk should be cast):
Immediately-will cast as soon as berserker gauge is full
Party monster- will cast as soon as you are attacked by a party monster type
Giant monster- will cast as soon as you are attacked by a giant type monster
3x monsters attacking you- will cast as soon as you are attacked by 3 or more monsters at the same time
10-Cast normal attack-if ticked the bot will cast normal attack
Stay Idle if no monster-if ticket the bot will not move until a monster in range appears
Cycle attack skill-if ticked the bot will attempt to always use the same pattern of skills that are set(example: if you set in skills :anti-devil bow,2 arrow attack, the bot will try to use them in the same order every time it attacks a monster)
Cast Buff High Priority-when this is ticked, the bot will cast buffs even when attacked by monsters (of course only if they expired, it will not recast the ones that are still active)
11-Log data-when ticked the bot will create a log of events
Pickup pet-when ticked the bot will use a pickup pet(NOTE: do not use if you do not have a pickup pet)
12-Delay purchase-the number here determines how fast the bot should buy items in town(suggested values are : 2000, 4000 ,use 2000 if you want to buy fast and if you have a good pc, use 4000 if you have a slower pc)
13-Delay attack-the number determines how fast the bot will attack(suggested values are : 500,1500, 500 for fastest attack and 1500 for a little slower, if you experience DC use 1500)
14-Secure step-very important for loop, keep this ticked always if you don’t want to hit anything while going to training spot
15-Item select-when you click this,first a message appears and some time afterwards(depending on you pc) the menu for items appears,here you can set everything you want the bot to pickup,sell,store
This is how you do it,you just select the item you want and move it from one listing to the other with the arrows,you can use clothes,weapons,accessories,etc. buttons to select all the items of the type and then just move them on to the list you want.NOTE: When you have set it up the way you want to press the SAVE button!!
NOTE: IF YOU use a secondary weapon for buffs, find it in the list and set in in the inventory so that it doesn’t get sold when you go back to town
[Only registered and activated users can see links. Click Here To Register...]
16-Here you may choose what monsters the bot will attack,this feature is not used often,but here you can fine tune the specific monsters the bot should attack,my suggestion is not to use this at all because you can limit the monster lvl in the config
17-Add skill protection-when this is ticked the it will help you with skill selection,it will not allow you to add attack skills as buffs or buffs as attack skill,so you don’t set it up bad tick this
Do not pick Item-CAUTION! ,when this is ticked the bot will not pickup ANY items
Loop after teleport-If you want the bot to loop(repot,repair etc.) TICK THIS!
Delay after teleport-this number defines in how many seconds the bot will start to loop,if you have a slow pc set the number to 20,if you have a fast pc set it to 5(the number is actually the number of seconds the bot should wait after teleport to start the loop, but if you set the number too low you will teleport after the bot has started the loop and the bot will malfunction)
Auto Party
[Only registered and activated users can see links. Click Here To Register...]
Ok here everything should be self explaining
Auto Potions
[Only registered and activated users can see links. Click Here To Register...]
If you want the bot to use pots or heal you or your pet in any way,here you can select if the bot should use speed buff skill or speed buff drug
Bot console
[Only registered and activated users can see links. Click Here To Register...]
Basically here you can see what the bot is doing at the moment
Config
This is the same config as the one on the beginning in this guide
Inventory
[Only registered and activated users can see links. Click Here To Register...]
When you open this up you will see your inventory
Hunting area
[Only registered and activated users can see links. Click Here To Register...]
Here you can change the area the bot will hunt in, but I suggest not to change any of this
Maps
[Only registered and activated users can see links. Click Here To Register...]
Now here we have a useful feature when sro is minimized or just in the background,with this you can see where you are at the moment (NOTE: Autorefresh needs to be ticked!),also you have some options to see items,people,npc,monster etc.
PlayerInfo
[Only registered and activated users can see links. Click Here To Register...]
Here you can see info on your character
Return to town
[Only registered and activated users can see links. Click Here To Register...]
This is important for the loop,here we have 3 sections:
1st is the section where you choose what the bot will do on death:
On death return to town-the bot returns to town on death
On death revive(lvl 1-10)-use this when you are below lvl 10 and the bot will revive on the spot on death
On death do nothing-the bot will stop on death
2nd Teleport to town
Here you should tick what you want the bot to go town if the number is the same or lower(higher),also you should fill in the numbers you want
3rd Item changes
Here you have all already written in the bot itself, and it is important to set this if you use buffs with a secondary weapon
Skill bot
[Only registered and activated users can see links. Click Here To Register...]
Here you need to add skills the bot will use,buffs and attack skills alike,you do that by just right clicking and then you can see the options you have
Skill list
[Only registered and activated users can see links. Click Here To Register...]
Here you can see all the skills you have
Script Selection
[Only registered and activated users can see links. Click Here To Register...]
Choose execute script
On the right of this you can choose the town and the script you want, all the scripts have monster names
Purchase
[Only registered and activated users can see links. Click Here To Register...]
EXTREMELY IMPORTANT FOR LOOP
Here you put in how many pots, horses and other stuff the bot should buy, also you have the option verify that you are in town, so that the bot doesn’t do the loop when you are not in town, this can happen when you start up the game and in the config loop after teleport is ticked and you are located somewhere other than town. You should enable auto party and storage as well, otherwise they will not work.
This is the end of my guide,I will update it once in a while,also will write how to use stall function.Thank you Nedra for making and developing the bot,Nihplod for letting me post on your site!
step 1 : Downloading the necessities:
[Only registered and activated users can see links. Click Here To Register...]
Run the installation and click yes continue etc,in the end just click ok,ok,ok,ok and finally yes
step 2:
You can use nuconnector or srproxy(if you run srproxy tick revbot compatability),after that start agbot,and finally start loader,which needs to be setup like this:
[Only registered and activated users can see links. Click Here To Register...]
1st use with Srproxy+agbot+loader
2nd use with Nuconnector+agbot+loader
it’s basicly the same,they only difference is that agbot works slightly faster with nuconnector than srproxy,but is more stable with srproxy.
The FULL AgBot guide:
When agbot is started for the first time there will be the config selection,just click select.Next click on the big config
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
Now we have here some of the most important settings,I will explain each one:
[Only registered and activated users can see links. Click Here To Register...]
1-Here you choose how your bot will behave for specific situations(normal,when in berserker mode,and when the berserker gauge is full but not yet activated)
2-Monster type to attack-here you choose what type of monster will your bot attack (if you are Europe I suggest you untick party monsters
3-Kill high HP monster first –when ticked the bot will kill the monster that has most HP and is attacking you,for instance if you are attacked by a giant and a normal monster the bot will first kill the giant then the normal monster
KS Player-KS=Kill steal, which means when this is ticked the bot will steal kills from other players, kill their mobs that they damaged
Select high HP monster first-When the bot chooses its target to attack it will choose preferably a stronger monster than a lower grade, for instance if this is ticked and a giant is standing near a normal monster, the bot will attack the giant
4- Pick other player item-bot picks up items from other players mobs
5- Pick item only if no monster attacking you- when this is ticked the bot will pickup items when no mobs are attacking it
6-Pick only valuable item-The bot will pick up only blue and sos,som,sosun items
7-Pick other player valuable item- The bot will pickup other players bluer or sos,som,sosun items
8- Monster LVL Range-defines the lvl range of monsters the bot should attack, which means if the first number is 5 it will not attack any monsters that are below lvl 5 and if the second number is 20 it will not attack any monsters that are above lvl 20
9-Cast berserk(defines when the berserk should be cast):
Immediately-will cast as soon as berserker gauge is full
Party monster- will cast as soon as you are attacked by a party monster type
Giant monster- will cast as soon as you are attacked by a giant type monster
3x monsters attacking you- will cast as soon as you are attacked by 3 or more monsters at the same time
10-Cast normal attack-if ticked the bot will cast normal attack
Stay Idle if no monster-if ticket the bot will not move until a monster in range appears
Cycle attack skill-if ticked the bot will attempt to always use the same pattern of skills that are set(example: if you set in skills :anti-devil bow,2 arrow attack, the bot will try to use them in the same order every time it attacks a monster)
Cast Buff High Priority-when this is ticked, the bot will cast buffs even when attacked by monsters (of course only if they expired, it will not recast the ones that are still active)
11-Log data-when ticked the bot will create a log of events
Pickup pet-when ticked the bot will use a pickup pet(NOTE: do not use if you do not have a pickup pet)
12-Delay purchase-the number here determines how fast the bot should buy items in town(suggested values are : 2000, 4000 ,use 2000 if you want to buy fast and if you have a good pc, use 4000 if you have a slower pc)
13-Delay attack-the number determines how fast the bot will attack(suggested values are : 500,1500, 500 for fastest attack and 1500 for a little slower, if you experience DC use 1500)
14-Secure step-very important for loop, keep this ticked always if you don’t want to hit anything while going to training spot
15-Item select-when you click this,first a message appears and some time afterwards(depending on you pc) the menu for items appears,here you can set everything you want the bot to pickup,sell,store
This is how you do it,you just select the item you want and move it from one listing to the other with the arrows,you can use clothes,weapons,accessories,etc. buttons to select all the items of the type and then just move them on to the list you want.NOTE: When you have set it up the way you want to press the SAVE button!!
NOTE: IF YOU use a secondary weapon for buffs, find it in the list and set in in the inventory so that it doesn’t get sold when you go back to town
[Only registered and activated users can see links. Click Here To Register...]
16-Here you may choose what monsters the bot will attack,this feature is not used often,but here you can fine tune the specific monsters the bot should attack,my suggestion is not to use this at all because you can limit the monster lvl in the config
17-Add skill protection-when this is ticked the it will help you with skill selection,it will not allow you to add attack skills as buffs or buffs as attack skill,so you don’t set it up bad tick this
Do not pick Item-CAUTION! ,when this is ticked the bot will not pickup ANY items
Loop after teleport-If you want the bot to loop(repot,repair etc.) TICK THIS!
Delay after teleport-this number defines in how many seconds the bot will start to loop,if you have a slow pc set the number to 20,if you have a fast pc set it to 5(the number is actually the number of seconds the bot should wait after teleport to start the loop, but if you set the number too low you will teleport after the bot has started the loop and the bot will malfunction)
Auto Party
[Only registered and activated users can see links. Click Here To Register...]
Ok here everything should be self explaining
Auto Potions
[Only registered and activated users can see links. Click Here To Register...]
If you want the bot to use pots or heal you or your pet in any way,here you can select if the bot should use speed buff skill or speed buff drug
Bot console
[Only registered and activated users can see links. Click Here To Register...]
Basically here you can see what the bot is doing at the moment
Config
This is the same config as the one on the beginning in this guide
Inventory
[Only registered and activated users can see links. Click Here To Register...]
When you open this up you will see your inventory
Hunting area
[Only registered and activated users can see links. Click Here To Register...]
Here you can change the area the bot will hunt in, but I suggest not to change any of this
Maps
[Only registered and activated users can see links. Click Here To Register...]
Now here we have a useful feature when sro is minimized or just in the background,with this you can see where you are at the moment (NOTE: Autorefresh needs to be ticked!),also you have some options to see items,people,npc,monster etc.
PlayerInfo
[Only registered and activated users can see links. Click Here To Register...]
Here you can see info on your character
Return to town
[Only registered and activated users can see links. Click Here To Register...]
This is important for the loop,here we have 3 sections:
1st is the section where you choose what the bot will do on death:
On death return to town-the bot returns to town on death
On death revive(lvl 1-10)-use this when you are below lvl 10 and the bot will revive on the spot on death
On death do nothing-the bot will stop on death
2nd Teleport to town
Here you should tick what you want the bot to go town if the number is the same or lower(higher),also you should fill in the numbers you want
3rd Item changes
Here you have all already written in the bot itself, and it is important to set this if you use buffs with a secondary weapon
Skill bot
[Only registered and activated users can see links. Click Here To Register...]
Here you need to add skills the bot will use,buffs and attack skills alike,you do that by just right clicking and then you can see the options you have
Skill list
[Only registered and activated users can see links. Click Here To Register...]
Here you can see all the skills you have
Script Selection
[Only registered and activated users can see links. Click Here To Register...]
Choose execute script
On the right of this you can choose the town and the script you want, all the scripts have monster names
Purchase
[Only registered and activated users can see links. Click Here To Register...]
EXTREMELY IMPORTANT FOR LOOP
Here you put in how many pots, horses and other stuff the bot should buy, also you have the option verify that you are in town, so that the bot doesn’t do the loop when you are not in town, this can happen when you start up the game and in the config loop after teleport is ticked and you are located somewhere other than town. You should enable auto party and storage as well, otherwise they will not work.
This is the end of my guide,I will update it once in a while,also will write how to use stall function.Thank you Nedra for making and developing the bot,Nihplod for letting me post on your site!
