[Bot-Crack]Sbot 1.22 Ver Renew Works !!!

[Only registered and activated users can see links. Click Here To Register...]

Thnx again for Weeman

sBot Crack 1.22 Again

--------------------------------------------------------------------------------

~Instructions for noobs~
1. Create a loopback adapter and configure it with the IP address 89.146.215.202
2. Start server.exe
3. Start sBot and login with whatever you like

Windows XP: [Only registered and activated users can see links. Click Here To Register...]
Windows Vista: Try the XP one and if that doesn't work try this:
[Only registered and activated users can see links. Click Here To Register...]

Quote:

Quote: How to install loopback adapter on Vista: 1. Click Start, and then click Control Panel. 2. Switch to Classic View under Control Panel in the left pane. 3. Double click Add Hardware, and then click Next. 4. Check "Install the hardware that I manually select from a list (Advanced)." 5. Click Network adapters, and then click Next. 6. In the Manufacturer box, click Microsoft. 7. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next. 8. Click Finish.

FAQ:
Q: Why is the file size so small?
A: I packed it with UPX for the lulz

Q: Can I use HardMod with sBot?
A: Yes, run 'HardMod Loader Listener', wait for SRO to start, then close it. But make sure it's in the same folder as the sro_client you are starting.
[Only registered and activated users can see links. Click Here To Register...]

Q: VirusTotal tells me there are Trojan's in the bot. Is there something wrong?
A: "A false positive is another way of saying ‘mistake’. As applied to the field of anti-virus programs, a false positive occurs when the program mistakenly flags an innocent file as being infected." These false-positives usually occur when an application has been packed with a packer. In this case that is true. I packed it so there's a less chance it will get patched. The file is clean.

Q: Is it possible to use the captcha decoder from PHClientless?
A: No. Unless you have a way to take a picture of only the image code then run the java decoder.

Q: My client crashes after server traffic.
A: Use HardMod listener.

If you get this error:
[23:56:53] * Login successfull, have fun
[23:57:04] * Checking for updates...
[23:57:05] * Finished checking for updates!
[23:57:05] * Starting: \sro_client.exe /18 0 1
[23:57:05] * Couldn't start SRO Client...[23:57:05] * Starting of sro_client.exe failed!


Guide !!


In sBot, on the top menu, click "Settings" -> "Select Silkroad Directory", and find your sro folder.

Download
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]

server.exe fix: [Only registered and activated users can see links. Click Here To Register...]

Adding more crap as I speak.
__________________

it's safe and worrks with new sro client?

I have problem with configuring loopback:/ I have message "Your loopback adapter is not configured correctly" but i changed ip for loopback.


Everything is ok now


I got error before second code

work good for me thx

not working for vista

i made a loopbackadapter there and added the right ip

now the server still say's

Your loopback adapter is not configured correctly

can someone help me??

my char had inventory full then bot disconnected from server. Bot is logged on now but bot status is inventory is full and he wont start...

Empty invertory ? DAAAH

do u think that i'm so stupid?


I had to go out from town then he started to walk

i have message "Your loopback adapter is not configured correctly" what should I do? i has install loopback adapter,

How to configure loopback adater? :(

it tells me under server status at top of bot, error contacting botserver

Download the serverfix.rar

ok I instal loopback adapter but I get error ,,Your loopback adapter is not configured correctly'' WTF? and where I can configure it?

Here is how you configure the loopback adapter:
Go to Control Panel ->Network Connection-> Select the Network created with the loopback adapter then right click it-> Properties ->Select Internet Protocol (TCP/IP)->
Select Use the Following IP Adress.
Then write the Ip that Hambal posted and press OK. You will get an error then press Ok again and again till there is no error apearring.Then close the Properties window and start server.exe. After that you can use Sbot normally.
Hope it helped .Have fun!

Quote:

Originally Posted by Julian2008 Download the serverfix.rar

thank you i seen that after i posted lol, i hope weeman can hack 1.23a so we can make use of the autocaptcha!!!!!

Quote:

Originally Posted by Julian2008 Here is how you configure the loopback adapter: Go to Control Panel ->Network Connection-> Select the Network created with the loopback adapter then right click it-> Properties ->Select Internet Protocol (TCP/IP)-> Select Use the Following IP Adress. Then write the Ip that Hambal posted and press OK. You will get an error then press Ok again and again till there is no error apearring.Then close the Properties window and start server.exe. After that you can use Sbot normally. Hope it helped .Have fun!

HERES THE WAY TO DO IT ON VISTA!

1. Install the Microsoft Loopback Adapter

Control Panel >>> Add Hardware >>> Click Next on the “Welcome to Add Hardware Wizard”

On the page that comes up click the “Install the hardware that I manually select from a list” button then click Next >>> Choose Network adapters click Next >>> Under Manufacturer choose Microsoft Under Network Adapter choose Microsoft Loopback Adapter. Click Next >>> Click Next …

2.Assign a static IP Address (89.146.215.202) to the Microsoft Loopback Adapter

Start >>> Control Panel >>> Manage Network Connections >>> You see a new network registered with a name like “Local Area Connection 2 Unidentified Network Microsoft Loopback Adapter” >>> right click it and select Properties >>> click on TCP/IPv4 >>> click Properties >>> Click use the following IP address >>> enter 89.146.215.202 (of course the two first numbers are what is important) for the IP Address and 255.255.255.0 for the subnet mask >>> Click OK.

hope this helps you vista users.

I can`t open IPConfig.exe - its open for 1sec,Then close.why?
Or how to change Loopback adapter`s ip?