I see loads of people looking for zynga bot this bot works 100% if anyone has any other zynga bot please share on this thread thanks
A step by step guide including images for ZPB 1.4.5 + 1.4.6 Start to Finnish.... :D
Step 0 Make sure your pc has a screen Resolution of at least 1280x960 the higher the better.
Step 1 Download the latest bot 1.4.6 from the Download Section
Step 2 Extract the Bot Using Winrar to an empty Folder.
[Only registered and activated users can see links. Click Here To Register...]
Step 3 Double click the bot .exe (or right click and open as admin if on windows 7 ) you will get the following
[Only registered and activated users can see links. Click Here To Register...]
Step 4 Make sure to have Cleartype and Aero themes disabled on Windows 7
Step 5 Open [Only registered and activated users can see links. Click Here To Register...] using Google Chrome
Step 6 Make sure once you have logged in to the lobby that the Chip icon is visible all the way down to Recently Played
Both the FULL and Empty box's are unchecked and that you have ALL set for blinds then finally
you have it set to NORMAL tables.
An image showing exactly how your lobby should look below........
[Only registered and activated users can see links. Click Here To Register...]
Step 6 Next Double click the bot .exe (or right click and open as admin if on windows 7 ) to Start configuration of Bot.
This will take you through three steps. Step 1 is configure your lobby, Just let it do its thing. Step 2 It will join an empty 9 seat
table and sit at two seats then leave. Step 3 you have to sit at a table with players (start step 3 once seated ) and play approx 15-20 hands
making sure to click all the relevant buttons. CHECK CALL RAISE and FOLD
Try and press them a few times each.
Step 7 Ok now we have played the required amount of hands its time to pess the STAND UP button at the table (no need to go to the lobby )
Once we have stood up Press the INSERT KEY ON YOUR PC KEYBOARD this will bring a Box onto your screen.On the left of the box you will
see an image and on the right a drop down box. The aim here is to match the image on the left with an option from the drop down. For example.....
If the image on the left says CALL we would click on the drop down menu on the right and select Call If the image
was RAISE or BET then we would select RAISE from the drop down box etc. etc etc. Now if the image was blank on the
left then just simply select blank from the drop down box. Once this has been done move to next step.
Step 8 Ok so now its time to exit the bot completely. And adjust your lobby. You can check both the EMPTY and FULL box's
Step 9 Next Double click the bot .exe (or right click and open as admin if on windows 7 ) this time you will get an option to START BOT this is what we should do.
Step 10 if all has gone correctly the bot will start to scroll the lobby choose a suitable table then join it, sit down and start playing...... :D :D :D
Once everything has gone according to plan and the bot is running correctly. Then is the time to alter your SETTINGS and your PROFILE. To how you would like your
Bot to play....Different Size tables, If you want it to play on normal or fast tables, diffent buyin amounts and of course what cards it should call,raise or go all in with.......
This is Mark 1 of this tutorial and i may have missed 1 or 2 things. If anyone notices something that should be included pleases feel free to let me Know
THKS and everyone enjoy your BOTTING :cheers:
I use this profile for 20k40k fast i got more profiles please share you're profile thanks
this exe is not a virus its a AutoIt file
[Non_Suited_Preflop_Hands]
all_in =AA KK QQ JJ AK TT 99 88 77
raise_strong=
raise =
call_strong= AQ
call_any =
call_upto_high =AJ AT KQ 66 55 44 33 22
call_upto_low =TQ JQ K9 KT KJ 69
call_once =A9 A8 A7 A6 A5 A4 A3 A2
small_blind =
[Suited_Preflop_Hands]
all_in =AK
raise_strong=
raise =
call_strong=AQ
call_any =
call_upto_high =AJ AT KQ
call_upto_low =A9 A8 A7 KJ KT JQ QT JT J9 J8 T9 T8 Q9 Q8 69
call_once =
small_blind = A6 A5 A4 A3 A2
[call_upto_low]
preflopcallamount =2
flopcallamount =2
turncallamount =2
rivercallamount =2
[call_upto_high]
preflopcallamount =4
flopcallamount =4
turncallamount =4
rivercallamount =4
[raise_strong]
preflopraiseamount =10
flopraiseamount =10
turnraiseamount =15
riverraiseamount =20
[raise]
preflopraiseamount =10
flopraiseamount =15
turnraiseamount =35
riverraiseamount =75
[FlopScore]
0-20=check
21-30=call_upto_low
31-50=raise
51-60=call_strong
61-95=call_strong
96-200=raise_strong
[TurnScore]
0-25=check
26-40=call_upto_low
41-50=call_upto_high
51-60=call
61-90=raise
91-200=raise_strong
[RiverScore]
0-30=check
31-45=call_upto_low
46-55=call_upto_high
56-65=call
66-200=all_in
A step by step guide including images for ZPB 1.4.5 + 1.4.6 Start to Finnish.... :D
Step 0 Make sure your pc has a screen Resolution of at least 1280x960 the higher the better.
Step 1 Download the latest bot 1.4.6 from the Download Section
Step 2 Extract the Bot Using Winrar to an empty Folder.
[Only registered and activated users can see links. Click Here To Register...]
Step 3 Double click the bot .exe (or right click and open as admin if on windows 7 ) you will get the following
[Only registered and activated users can see links. Click Here To Register...]
Step 4 Make sure to have Cleartype and Aero themes disabled on Windows 7
Step 5 Open [Only registered and activated users can see links. Click Here To Register...] using Google Chrome
Step 6 Make sure once you have logged in to the lobby that the Chip icon is visible all the way down to Recently Played
Both the FULL and Empty box's are unchecked and that you have ALL set for blinds then finally
you have it set to NORMAL tables.
An image showing exactly how your lobby should look below........
[Only registered and activated users can see links. Click Here To Register...]
Step 6 Next Double click the bot .exe (or right click and open as admin if on windows 7 ) to Start configuration of Bot.
This will take you through three steps. Step 1 is configure your lobby, Just let it do its thing. Step 2 It will join an empty 9 seat
table and sit at two seats then leave. Step 3 you have to sit at a table with players (start step 3 once seated ) and play approx 15-20 hands
making sure to click all the relevant buttons. CHECK CALL RAISE and FOLD
Try and press them a few times each.
Step 7 Ok now we have played the required amount of hands its time to pess the STAND UP button at the table (no need to go to the lobby )
Once we have stood up Press the INSERT KEY ON YOUR PC KEYBOARD this will bring a Box onto your screen.On the left of the box you will
see an image and on the right a drop down box. The aim here is to match the image on the left with an option from the drop down. For example.....
If the image on the left says CALL we would click on the drop down menu on the right and select Call If the image
was RAISE or BET then we would select RAISE from the drop down box etc. etc etc. Now if the image was blank on the
left then just simply select blank from the drop down box. Once this has been done move to next step.
Step 8 Ok so now its time to exit the bot completely. And adjust your lobby. You can check both the EMPTY and FULL box's
Step 9 Next Double click the bot .exe (or right click and open as admin if on windows 7 ) this time you will get an option to START BOT this is what we should do.
Step 10 if all has gone correctly the bot will start to scroll the lobby choose a suitable table then join it, sit down and start playing...... :D :D :D
Once everything has gone according to plan and the bot is running correctly. Then is the time to alter your SETTINGS and your PROFILE. To how you would like your
Bot to play....Different Size tables, If you want it to play on normal or fast tables, diffent buyin amounts and of course what cards it should call,raise or go all in with.......
This is Mark 1 of this tutorial and i may have missed 1 or 2 things. If anyone notices something that should be included pleases feel free to let me Know
THKS and everyone enjoy your BOTTING :cheers:
I use this profile for 20k40k fast i got more profiles please share you're profile thanks
this exe is not a virus its a AutoIt file
[Non_Suited_Preflop_Hands]
all_in =AA KK QQ JJ AK TT 99 88 77
raise_strong=
raise =
call_strong= AQ
call_any =
call_upto_high =AJ AT KQ 66 55 44 33 22
call_upto_low =TQ JQ K9 KT KJ 69
call_once =A9 A8 A7 A6 A5 A4 A3 A2
small_blind =
[Suited_Preflop_Hands]
all_in =AK
raise_strong=
raise =
call_strong=AQ
call_any =
call_upto_high =AJ AT KQ
call_upto_low =A9 A8 A7 KJ KT JQ QT JT J9 J8 T9 T8 Q9 Q8 69
call_once =
small_blind = A6 A5 A4 A3 A2
[call_upto_low]
preflopcallamount =2
flopcallamount =2
turncallamount =2
rivercallamount =2
[call_upto_high]
preflopcallamount =4
flopcallamount =4
turncallamount =4
rivercallamount =4
[raise_strong]
preflopraiseamount =10
flopraiseamount =10
turnraiseamount =15
riverraiseamount =20
[raise]
preflopraiseamount =10
flopraiseamount =15
turnraiseamount =35
riverraiseamount =75
[FlopScore]
0-20=check
21-30=call_upto_low
31-50=raise
51-60=call_strong
61-95=call_strong
96-200=raise_strong
[TurnScore]
0-25=check
26-40=call_upto_low
41-50=call_upto_high
51-60=call
61-90=raise
91-200=raise_strong
[RiverScore]
0-30=check
31-45=call_upto_low
46-55=call_upto_high
56-65=call
66-200=all_in