[Re-Release] Burnout System

01/22/2013 19:37 Andrej-Delany#1

Hall�chen heute release ich mal das Burnout System von Unleashed!

Source:

MsgHdr.h (_Network)
�ber:

Code:

/*------------------------------------------------------------------------------------------------------------------------------------------------------------*/

#define SNAPSHOTTYPE_CHAT	(WORD)0x0001
#define SNAPSHOTTYPE_ACTMSG	(WORD)0x0002

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
#define PACKETTYPE_SENDBURNOUT						(DWORD)0x88100262
#endif //__BURNOUT_SYSTEM

DpSrvr.cpp (WorldServer)
�ber dem hier:

Code:

}

CDPSrvr::~CDPSrvr()
{

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	ON_MSG( PACKETTYPE_SENDBURNOUT, OnSendBurnout );
#endif //__BURNOUT_SYSTEM

und ganz unten das hier einf�gen:

Code:

#ifdef __BURNOUT_SYSTEM
void CDPSrvr::OnSendBurnout( CAr & ar, DPID dpidCache, DPID dpidUser, LPBYTE lpBuf, u_long uBufSize )
{
	CUser* pUser = g_UserMng.GetUser( dpidCache, dpidUser );
	CMover* pMover = pUser;

	g_UserMng.AddCreateSfxObj( (CMover *)pUser, XI_SKILL_KNT_TWOAX_POWERSTUMP03, pUser->GetPos().x, pUser->GetPos().y, pUser->GetPos().z );

	if( pMover->GetBurnoutExp() >= 100 )
	{
		CCtrl* pCtrl = (CCtrl*)pMover;

		pCtrl->DoAddBuff( SI_CHEER_BURNOUT, 1, pCtrl );
		pMover->SetBurnoutExp( 0 );
	}
}
#endif //__BURNOUT_SYSTEM

DPSrvr.h (WorldServer)
�ber dem hier:

Code:

};


#endif // __DPSRVR_H__

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
public:
    void    OnSendBurnout( CAr & ar, DPID dpidCache, DPID dpidUser, LPBYTE, u_long );
#endif //__BURNOUT_SYSTEM

DPClient.cpp (Neuz)
�ber dem hier:

Code:

CDPClient	g_DPlay;

das:

Code:

#ifdef __BURNOUT_SYSTEM
void CDPClient::SendBurnout()
{
    BEFORESENDSOLE( ar, PACKETTYPE_SENDBURNOUT, DPID_UNKNOWN );
    SEND( ar, this, DPID_SERVERPLAYER );
}  
#endif //__BURNOUT_SYSTEM

DPClient.h (Neuz)
�ber dem hier:

Code:

//________________________________________________________________________________
//	Operator commands
	void	OnShout( CAr & ar );
	void	OnPlayMusic( CAr & ar );
	void	OnPlaySound( CAr & ar );

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
public:
	void SendBurnout();
#endif //__BURNOUT_SYSTEM

WndField.h
unter dem hier:

Code:

LPDIRECT3DVERTEXBUFFER9 m_pVBHPGauge;
	LPDIRECT3DVERTEXBUFFER9 m_pVBMPGauge;
	LPDIRECT3DVERTEXBUFFER9 m_pVBFPGauge;
	LPDIRECT3DVERTEXBUFFER9 m_pVBEXPGauge;

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	LPDIRECT3DVERTEXBUFFER9 m_pVBBEXPGauge;
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

	BOOL m_bVBHPGauge;
	BOOL m_bVBMPGauge;
	BOOL m_bVBFPGauge;
	BOOL m_bVBEXPGauge;

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	BOOL m_bVBBEXPGauge;
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

	int m_nEXPWidth;
	int m_nPXPWidth;

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	int m_nBEXPWidth;
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

	virtual	void SetWndRect( CRect rectWnd, BOOL bOnSize = TRUE );
	virtual	void PaintFrame( C2DRender* p2DRender );

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	virtual BOOL OnChildNotify( UINT message, UINT nID, LRESULT* pLResult );
#endif //__BURNOUT_SYSTEM

WndField.cpp (_Interface)
unter dem hier:

Code:

	m_nEXPWidth = -1;
	m_nPXPWidth = -1;

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	m_nBEXPWidth = -1;
#endif //__BURNOUT_SYSTEM

unter dme hier:

Code:

	m_pVBMPGauge = NULL;
	m_pVBFPGauge = NULL;
	m_pVBEXPGauge = NULL;

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	m_pVBBEXPGauge = NULL;
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

	m_bVBMPGauge = TRUE;
	m_bVBFPGauge = TRUE;

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	m_bVBBEXPGauge = TRUE;
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

CWndStatus::~CWndStatus()
{
	DeleteDeviceObjects();
}

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
BOOL CWndStatus::OnChildNotify( UINT message, UINT nID, LRESULT* pLResult )
{
	switch (nID)
    {
    case WIDC_BUTTON1:
        {
			CWndButton* pWndButton = ( CWndButton* )GetDlgItem( WIDC_BUTTON1 );
			CMover* pMover =  g_pPlayer;
			CCtrl* pCtrl = (CCtrl*)pMover;

			pCtrl->DoAddBuff( SI_CHEER_BURNOUT, 1, pCtrl );
			pMover->SetBurnoutExp( 0 );

			g_DPlay.SendBurnout();

			pWndButton->EnableWindow( FALSE );
		}break;
	}

	return TRUE;
}
#endif //____BURNOUT_SYSTEM

unter dem hier:

Code:

	LPWNDCTRL lpPxp  = GetWndCtrl( WIDC_CUSTOM5 );
	LPWNDCTRL lpFace = GetWndCtrl( WIDC_CUSTOM6 );

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	LPWNDCTRL lpBExp = GetWndCtrl( WIDC_CUSTOM7 );
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

		nWidth = nWidthClient * pMover->GetHitPoint() / pMover->GetMaxHitPoint();
		if( m_nHPWidth != nWidth ) 
		{
			m_nHPWidth = nWidth;
			rect = lpHP->rect;//.SetRect( 105, 6, 105 + nWidthClient, 6 + 12 );
			rectTemp = rect; 
			rectTemp.right = rectTemp.left + nWidth;
			ClientToScreen( rectTemp );
			m_bVBHPGauge = m_pTheme->MakeGaugeVertex( m_pApp->m_pd3dDevice, &rectTemp, 0x64ff0000, m_pVBHPGauge, &m_texGauFillNormal );
		}

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
		nWidth = nWidthClient * pMover->GetBurnoutExp() / 100;
		if( m_nBEXPWidth != nWidth ) 
		{
			m_nBEXPWidth = nWidth;
			rect = lpBExp->rect;
			rectTemp = rect; 
			rectTemp.right = rectTemp.left + nWidth - 20;
			ClientToScreen( rectTemp );
			m_bVBBEXPGauge = m_pTheme->MakeGaugeVertex( m_pApp->m_pd3dDevice, &rectTemp, 0xffffd100, m_pVBBEXPGauge, &m_texGauFillNormal );
		}
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

	LPWNDCTRL lpFP   = GetWndCtrl( WIDC_CUSTOM3 );
	LPWNDCTRL lpExp  = GetWndCtrl( WIDC_CUSTOM4 );
	LPWNDCTRL lpFace = GetWndCtrl( WIDC_CUSTOM6 );

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	LPWNDCTRL lpBExp = GetWndCtrl( WIDC_CUSTOM7 );
#endif //__BURNOUT_SYSTEM

unter:

Code:

		if( m_bVBMPGauge )
			m_pTheme->RenderGauge( p2DRender->m_pd3dDevice, m_pVBMPGauge, &m_texGauFillNormal );
		if( m_bVBFPGauge )
			m_pTheme->RenderGauge( p2DRender->m_pd3dDevice, m_pVBFPGauge, &m_texGauFillNormal );

das:

Code:

#ifdef __BURNOUT_SYSTEM
		if( m_bVBBEXPGauge )
			m_pTheme->RenderGauge( p2DRender->m_pd3dDevice, m_pVBBEXPGauge, &m_texGauFillNormal );
#endif //__BURNOUT_SYSTEM

unter dme hier:

Code:

		char cbufFp[16] = {0,};
		char cbufExp[16] = {0,};
		char cbufPxp[16] = {0,};

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
		char cbufBExp[16] = {0,};
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

		int nCharHP, nCharMP, nCharFP, nCharEXP; //, nCharPXP;

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
		int nCharBEXP;
#endif //__BURNOUT_SYSTEM

unter dme hier:

Code:

			wsprintf(cbufMp, "%d%%", pMover->GetManaPointPercent());
			wsprintf(cbufFp, "%d%%", pMover->GetFatiguePointPercent());

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
			wsprintf(cbufBExp, "%d%%", pMover->GetBurnoutExp());
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

			p2DRender->TextOut( lpMP->rect.right - 90, lpMP->rect.top - nTopGap, cbufMp, dwColor, 0xff000000 );
			p2DRender->TextOut( lpFP->rect.right - 90, lpFP->rect.top - nTopGap, cbufFp, dwColor, 0xff000000 );

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
			p2DRender->TextOut( lpBExp->rect.right -70, lpBExp->rect.top - nTopGap, cbufBExp, dwColor, 0xff000000 );
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

			nCharMP = wsprintf(cbufMp, prj.GetText( TID_GAME_WND_STATUS_PERCENT_POINT ), pMover->GetManaPoint());
			nCharFP = wsprintf(cbufFp, prj.GetText( TID_GAME_WND_STATUS_PERCENT_POINT ), pMover->GetFatiguePoint());

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
			nCharBEXP = wsprintf(cbufBExp, prj.GetText( TID_GAME_WND_STATUS_PERCENT_POINT ), pMover->GetBurnoutExp());
#endif //__BURNOUT_SYSTEM

uner dem hier:

Code:

			p2DRender->TextOut( x - (int)(nCharMP*5.8f), lpMP->rect.top - nTopGap, cbufMp, dwColor, 0xff000000 );
			p2DRender->TextOut( x - (int)(nCharFP*5.8f), lpFP->rect.top - nTopGap, cbufFp, dwColor, 0xff000000 );

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
			p2DRender->TextOut( x - (int)(nCharBEXP*5.8f), lpBExp->rect.top - nTopGap, cbufBExp, dwColor, 0xff000000 );
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

			nCharMP = wsprintf(cbufMp, "%d", pMover->GetManaPoint());
			nCharFP = wsprintf(cbufFp, "%d", pMover->GetFatiguePoint());

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
			nCharBEXP = wsprintf(cbufBExp, "%d%%", pMover->GetBurnoutExp());
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

			p2DRender->TextOut( x - (int)(((float)nCharMP / 2.0f) * size.cx), lpMP->rect.top - nTopGap, cbufMp, dwColor, 0xff000000 );
			p2DRender->TextOut( x - (int)(((float)nCharFP / 2.0f) * size.cx), lpFP->rect.top - nTopGap, cbufFp, dwColor, 0xff000000 );

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
			p2DRender->TextOut( x - (int)(((float)nCharBEXP / 3.0f) * size.cx), lpBExp->rect.top - nTopGap, cbufBExp, dwColor, 0xff000000);
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

			p2DRender->TextOut( lpMP->rect.right - nGap, lpMP->rect.top - nTopGap, "/", dwColor, 0xff000000 );
			p2DRender->TextOut( lpFP->rect.right - nGap, lpFP->rect.top - nTopGap, "/", dwColor, 0xff000000 );

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
			p2DRender->TextOut( lpBExp->rect.right - nGap, lpBExp->rect.top - nTopGap, "", dwColor, 0xff000000 );
#endif //__BURNOUT_SYSTEM

unter dem hier:

Code:

		m_pApp->m_pd3dDevice->CreateVertexBuffer( sizeof( TEXTUREVERTEX2 ) * 3 * 6, D3DUSAGE_WRITEONLY | D3DUSAGE_DYNAMIC, D3DFVF_TEXTUREVERTEX2, D3DPOOL_DEFAULT, &m_pVBMPGauge, NULL );
		m_pApp->m_pd3dDevice->CreateVertexBuffer( sizeof( TEXTUREVERTEX2 ) * 3 * 6, D3DUSAGE_WRITEONLY | D3DUSAGE_DYNAMIC, D3DFVF_TEXTUREVERTEX2, D3DPOOL_DEFAULT, &m_pVBFPGauge, NULL );
		m_pApp->m_pd3dDevice->CreateVertexBuffer( sizeof( TEXTUREVERTEX2 ) * 3 * 6, D3DUSAGE_WRITEONLY | D3DUSAGE_DYNAMIC, D3DFVF_TEXTUREVERTEX2, D3DPOOL_DEFAULT, &m_pVBEXPGauge, NULL );

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
		m_pApp->m_pd3dDevice->CreateVertexBuffer( sizeof( TEXTUREVERTEX2 ) * 3 * 6, D3DUSAGE_WRITEONLY | D3DUSAGE_DYNAMIC, D3DFVF_TEXTUREVERTEX2, D3DPOOL_DEFAULT, &m_pVBBEXPGauge, NULL );
#endif //__BURNOUT_SYSTEM

MoverActEvent.cpp (_Common)
unter:

Code:

BOOL	CMover::OnDamage( int nItemID, DWORD dwState, CMover *pHitObj, const D3DXVECTOR3 *pvDamagePos, DWORD dwAtkFlag )
{

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	if( pHitObj && pHitObj->IsPlayer() && pHitObj->GetBurnoutExp() < 100 )
		pHitObj->SetBurnoutExp( pHitObj->GetBurnoutExp() + 1 );
#endif

Mover.cpp (_Common)
unter:

Code:

		int i;
		for( i = 0; i < MAX_ADJPARAMARY; i ++ )		m_adjParamAry[i] = 0;
		for( i = 0; i < MAX_ADJPARAMARY; i ++ )		m_chgParamAry[i] = 0x7FFFFFFF;	// ������ �ִ�.
	}

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	m_nBurnoutExp = 0;
#endif //__BURNOUT_SYSTEM

Mover.h (_Common)
unter:

Code:

	DWORD			m_dwSkinSet, m_dwFace, m_dwHairMesh, m_dwHairColor, m_dwHeadMesh;	/// �ܾ� 
	FLOAT			m_fHairColorR, m_fHairColorG, m_fHairColorB;						/// �Ӹ��� 
	LONG			m_nJob;						/// ���� 
	DWORD			m_dwAuthorization;			/// ���� ���� (�Ϲݿ��* �ְ� �����ڱ��� )

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
public:
	int				m_nBurnoutExp;
#endif //__BURNOUT_SYSTEM

unter:

Code:

	BOOL			Disguise( LPDIRECT3DDEVICE9 pd3dDevice, DWORD dwMoverIndex );
	DWORD			IsAuthorization( DWORD dwAuthorization ) { return dwAuthorization == m_dwAuthorization; }
	DWORD			IsAuthHigher( DWORD dwAuthorization ) { return dwAuthorization <= m_dwAuthorization; }

das hier:

Code:

#ifdef __BURNOUT_SYSTEM
	void			SetBurnoutExp( int nBurnoutExp ) { this->m_nBurnoutExp = nBurnoutExp; }
	int				GetBurnoutExp() { return this->m_nBurnoutExp; }
#endif //__BURNOUT_SYSTEM

Achtung folgenden schritt nur machen falls ihr die folgende funktion nicht schon implementiert habt.
Ctrl.cpp (_Common)
ganz unten das adden:

Code:

#ifdef __BURNOUT_SYSTEM
void CCtrl::DoAddBuff( DWORD dwSkill, int nLevel, CCtrl *pTarget )
{
    ItemProp* pSkillProp;
    AddSkillProp* pAddSkillProp;
    GetSkillProp( &pSkillProp, &pAddSkillProp, dwSkill, nLevel, "DoActiveSkill" );

	if( pAddSkillProp )
	{
     DoApplySkill( pTarget, pSkillProp, pAddSkillProp, 0, 0, FALSE, 0 );

#ifdef __WORLDSERVER        
     g_UserMng.AddDoApplySkill( this, pTarget->GetId(), dwSkill, nLevel );
#endif
	}
}  
#endif //__BURNOUT_SYSTEM

Ctrl.h (_Common.h)
uber:

Code:

	CShip*			GetIAObjLink()			{ return m_pIAObjLink; }
	void			SetIAObjLink( CShip *pIA );
	D3DXMATRIX*		GetInvTM()				{ return &m_mInvTM; }

das hier adden:

Code:

#ifdef __BURNOUT_SYSTEM
public:
	void            DoAddBuff( DWORD dwSkill, int nLevel, CCtrl *pTarget);
#endif //__BURNOUT_SYSTEM

nun noch in der Versioncommon.h der neuz und des Worldservers __BURNOUT_SYSTEM definieren

Resource:

Spoiler

Credits 100% Unleashed!

01/22/2013 19:53 Lumi#2

Sch�n gemacht.
Da hier viele die neuen Files verwenden, sprich neue Parameter, solltest du auch die resdata.inc Eintr�ge f�r v16+ noch einf�gen.

01/22/2013 20:12 Andrej-Delany#3

Quote:

Originally Posted by Lumi'

Sch�n gemacht.
Da hier viele die neuen Files verwenden, sprich neue Parameter, solltest du auch die resdata.inc Eintr�ge f�r v16+ noch einf�gen.

Habe gerade mal gesucht habe die resdata eint�ge mit den neuen Parametern leider nicht mehr.
Ich hoffe jemand kann mir hier aushelfen...

01/22/2013 20:36 Crowley�#4

Quote:

Originally Posted by Andrej-Delany

Habe gerade mal gesucht habe die resdata eint�ge mit den neuen Parametern leider nicht mehr.
Ich hoffe jemand kann mir hier aushelfen...

sollte so gehen ^-^

Code:

APP_STATUS1 "WndStatus2.tga" "" 0 220 112 0x2410000 26
{
// Title String
IDS_RESDATA_INC_003684
}
{
// Help Key
IDS_RESDATA_INC_003685
}
{
    WTYPE_CUSTOM WIDC_CUSTOM1 "" 0 96 4 204 14 0x260000 0 0 0 0 46 112 169
    {
    // Title String
IDS_RESDATA_INC_003686
    }
    {
    // ToolTip
IDS_RESDATA_INC_003687
    }
    WTYPE_CUSTOM WIDC_CUSTOM2 "" 0 96 20 204 30 0x260000 0 0 0 0 46 112 169
    {
    // Title String
IDS_RESDATA_INC_003688
    }
    {
    // ToolTip
IDS_RESDATA_INC_003689
    }
    WTYPE_CUSTOM WIDC_CUSTOM3 "" 0 96 34 204 44 0x260000 0 0 0 0 46 112 169
    {
    // Title String
IDS_RESDATA_INC_003690
    }
    {
    // ToolTip
IDS_RESDATA_INC_003691
    }
    WTYPE_CUSTOM WIDC_CUSTOM4 "" 0 96 50 204 58 0x260000 0 0 0 0 46 112 169
    {
    // Title String
IDS_RESDATA_INC_003692
    }
    {
    // ToolTip
IDS_RESDATA_INC_003693
    }
    WTYPE_CUSTOM WIDC_CUSTOM5 "" 0 96 66 204 74 0x260000 0 0 0 0 46 112 169
    {
    // Title String
IDS_RESDATA_INC_003694
    }
    {
    // ToolTip
IDS_RESDATA_INC_003695
    }
    WTYPE_CUSTOM WIDC_CUSTOM6 "" 0 4 4 68 72 0x260000 0 0 0 0 46 112 169
    {
    // Title String
IDS_RESDATA_INC_003696
    }
    {
    // ToolTip
IDS_RESDATA_INC_003697
    }
    WTYPE_BUTTON WIDC_BUTTON1 "ButtBurnOut.bmp" 0 184 62 209 80 0x220000 0 0 0 0 46 112 169
    {
IDS_RESDATA_INC_010000	// Title String
    }
    {
IDS_RESDATA_INC_010001	// ToolTip
    }
    WTYPE_CUSTOM WIDC_CUSTOM7 "" 0 96 78 166 90 0x220000 0 0 0 0 46 112 169
    {
IDS_RESDATA_INC_010002	// Title String
    }
    {
IDS_RESDATA_INC_010003	// ToolTip
    }

}

ps: bei mir ist es app_status1 Oo

mfg. Crowley ;)

01/23/2013 09:06 Rhyder`#5

what is the v16 resdata of this?

01/23/2013 12:19 ayashin0#6

Quote:

Originally Posted by jayjei14

what is the v16 resdata of this?

Look at Crowley post. that is the v16 resdata

01/24/2013 09:43 Unleashed!#7

Damit das hier komplett ist, w�rs sch�n, wenn jemand nochmal die WndStatus.tga von dem Teil hochladen k�nnte, hatte ich damals einfach mit PS etwas h�her gemacht, ansonten liegt der Button leicht au�erhalb des Fensters.

BTW: Der Code ist schrecklich, da es damals das erste war, dass ich im Source gemacht habe und ich wei� nicht, ob das hier die gefixxte Version ist, kanns mir gerade nicht angucken, evtl. release ich das nochmal in sauberem Code. Sollte dies die nicht gefixxte Version sein, crashed sie den WS bei bestimmten Monstern, die angegriffen werden (z.B. Clockworks), weil auch diese Burnout EP erhalten, wenn sie angegriffen werden. Der Crash entsteht nur bei Monstern, die eine eigene AI haben.

01/24/2013 14:18 Rhyder`#8

Please put also the defineskill and the textclient.inc/.txt.txt

01/24/2013 14:59 Lumi#9

Quote:

Originally Posted by jayjei14

Please put also the defineskill and the textclient.inc/.txt.txt

I think you can do that yourself, 'cause you have to chose your own skill (effect).

01/24/2013 15:08 Rhyder`#10

Quote:

Originally Posted by Lumi'

I think you can do that yourself, 'cause you have to chose your own skill (effect).

Please put the code of that as like as yours

Im only a bigenner

01/24/2013 19:37 Andrej-Delany#11

Update 1

CW Crash:

Spoiler

Resource:

Spoiler

defineSkill.h
�ber:

Code:

#define SA_FLASH_L01               4005
#define SA_FLASH_L02               4006
#define SA_FLASH_L03               4007

das hier:

Code:

#define SI_CHEER_BURNOUT			500
#define SA_BURNOUT_LV1				501
#define SI_CHEER_BURNOUT2			502
#define SA_BURNOUT2_LV1				503
#define SI_CHEER_BURNOUT3			504
#define SA_BURNOUT3_LV1				505
#define SI_CHEER_BURNOUT4			506
#define SA_BURNOUT4_LV1				507

propSkillAdd.csv
ganz unten das adden:

Code:

SA_BURNOUT_LV1,SI_CHEER_BURNOUT,1,=,=,=,=,=,=,=,=,=,DST_SPEED,DST_JUMPING,50,100,=,=,=,=,=,=,=,=,65,=,=,1000,=,=,=,500000,=,1,10,600
SA_BURNOUT2_LV1,SI_CHEER_BURNOUT2,1,=,=,=,=,=,=,=,=,=,DST_SPEED,DST_JUMPING,50,100,=,=,=,=,=,=,=,=,65,=,=,1000,=,=,=,500000,=,1,10,600
SA_BURNOUT3_LV1,SI_CHEER_BURNOUT3,1,=,=,=,=,=,=,=,=,=,DST_SPEED,DST_JUMPING,50,100,=,=,=,=,=,=,=,=,65,=,=,1000,=,=,=,500000,=,1,10,600
SA_BURNOUT4_LV1,SI_CHEER_BURNOUT4,1,=,=,=,=,=,=,=,=,=,DST_SPEED,DST_JUMPING,50,100,=,=,=,=,=,=,=,=,65,=,=,1000,=,=,=,500000,=,1,10,600

propSkill.txt.txt
ganz unten daas adden:

Code:

IDS_PROPSKILL_TXT_000500	Burnout
IDS_PROPSKILL_TXT_000501	Effekt des Burnouts.
IDS_PROPSKILL_TXT_000502	Burnout
IDS_PROPSKILL_TXT_000503	Effekt des Burnouts.
IDS_PROPSKILL_TXT_000504	Burnout
IDS_PROPSKILL_TXT_000505	Effekt des Burnouts.
IDS_PROPSKILL_TXT_000506	Burnout
IDS_PROPSKILL_TXT_000507	Effekt des Burnouts.

propSkill.txt
ganz unten das adden:

Code:

11	SI_CHEER_BURNOUT	IDS_PROPSKILL_TXT_000500	1	1	JTYPE_BASE	JOB_VAGRANT	DIS_VAGRANT	JOB_VAGRANT	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	_NONE	0	0	0	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	AR_RANGE	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	SR_BEFORE	=	0	=	XI_SKILL_ASS_CHEER_CASTING01	=	XI_SKILL_ASS_CHEER_QUICKSTEP01 	=	=	MTI_ASS_CHEER_CASTING01	=	0	EXT_SELFCHGPARAMET	WUI_NOW	=	=	=	=	=	=	=	=	KT_MAGIC	0	0	0	0	0	1	1	5	SA_BURNOUT_LV1	1	CT_GENERAL	=	=	=	=	=	=	=	=	=	=	=	"""skill_Burnout.dds"""	0	""""""	IDS_PROPSKILL_TXT_000501	=
11	SI_CHEER_BURNOUT2	IDS_PROPSKILL_TXT_000502	1	1	JTYPE_BASE	JOB_VAGRANT	DIS_VAGRANT	JOB_VAGRANT	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	_NONE	0	0	0	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	AR_RANGE	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	SR_BEFORE	=	0	=	XI_SKILL_ASS_CHEER_CASTING01	=	XI_SKILL_ASS_CHEER_QUICKSTEP01 	=	=	MTI_ASS_CHEER_CASTING01	=	0	EXT_SELFCHGPARAMET	WUI_NOW	=	=	=	=	=	=	=	=	KT_MAGIC	0	0	0	0	0	1	1	5	SA_BURNOUT2_LV1	1	CT_GENERAL	=	=	=	=	=	=	=	=	=	=	=	"""skill_Burnout.dds"""	0	""""""	IDS_PROPSKILL_TXT_000503	=
11	SI_CHEER_BURNOUT3	IDS_PROPSKILL_TXT_000504	1	1	JTYPE_BASE	JOB_VAGRANT	DIS_VAGRANT	JOB_VAGRANT	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	_NONE	0	0	0	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	AR_RANGE	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	SR_BEFORE	=	0	=	XI_SKILL_ASS_CHEER_CASTING01	=	XI_SKILL_ASS_CHEER_QUICKSTEP01 	=	=	MTI_ASS_CHEER_CASTING01	=	0	EXT_SELFCHGPARAMET	WUI_NOW	=	=	=	=	=	=	=	=	KT_MAGIC	0	0	0	0	0	1	1	5	SA_BURNOUT3_LV1	1	CT_GENERAL	=	=	=	=	=	=	=	=	=	=	=	"""skill_Burnout.dds"""	0	""""""	IDS_PROPSKILL_TXT_000505	=
11	SI_CHEER_BURNOUT4	IDS_PROPSKILL_TXT_000506	1	1	JTYPE_BASE	JOB_VAGRANT	DIS_VAGRANT	JOB_VAGRANT	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	_NONE	0	0	0	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	AR_RANGE	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	=	SR_BEFORE	=	0	=	XI_SKILL_ASS_CHEER_CASTING01	=	XI_SKILL_ASS_CHEER_QUICKSTEP01 	=	=	MTI_ASS_CHEER_CASTING01	=	0	EXT_SELFCHGPARAMET	WUI_NOW	=	=	=	=	=	=	=	=	KT_MAGIC	0	0	0	0	0	1	1	5	SA_BURNOUT4_LV1	1	CT_GENERAL	=	=	=	=	=	=	=	=	=	=	=	"""skill_Burnout.dds"""	0	""""""	IDS_PROPSKILL_TXT_000507	=