[BETA] Grand Chase Starter/Bypasser Skin for RainMeter

Hi guys, I'm Back with a new Twist to Giveaway.

I know some of you are still looking for "that Skin" in Rainmeter that will help you in your Grand Chase basic needs,

well, here i go...
but before that, here's a Friendly reminder
READ EVERYTHING
We'll start of with the Requirements,

1. [Only registered and activated users can see links. Click Here To Register...] [[Only registered and activated users can see links. Click Here To Register...]] Taken from the Rainmeter Website.
2. [Only registered and activated users can see links. Click Here To Register...] by >.< Kyonko
For Windows XP Users, [Only registered and activated users can see links. Click Here To Register...]
For Windows Vista User, [Only registered and activated users can see links. Click Here To Register...]
For Low-end PC [Only registered and activated users can see links. Click Here To Register...]
3. Grand Chase

Firstly, Download the Rainmeter 2.3.3 (Taken from the Rainmeter Website to ensure a Clean and non-Virus infected Environment)
Secondly, Download the Grand Chase skin Prototype 3 (Uploaded in Mediafire)

Now that you have all the Files needed,

[IMPORTANT]
No one is allowed to Duplicate this post to any other Forum or Website without my Permission,

1. Install the Rainmeter 2.3.3,
2. After the Installation, Double Click "GrandChaseBypasser_Prototype 3.rmskin"

[Only registered and activated users can see links. Click Here To Register...]

3. Then Click Install.
4. After the Installation, The Skin itself will Appear.

[Only registered and activated users can see links. Click Here To Register...]


Now then we need to Customized the Skin, so that it will work on your Grand Chase,

1. Click the Settings, a Wild Notepad will appear :P

[Only registered and activated users can see links. Click Here To Register...]


2. Go to your Grand Chase Folder, Right Click the "Grandchase.exe" then Click Properties.

[Only registered and activated users can see links. Click Here To Register...]

3. Copy the Location that is highlighted in Blue.
to copy, Highlight it, Right click then Click Copy
4. Then go back to the wild Notepad, Replace the D:\GrandChaseChaos with the one you just Copied in your Grandchase.exe Properties.

[Only registered and activated users can see links. Click Here To Register...]

5. now Save the Wild notepad then Close.

Now then, we need to Refresh the Skin so that the Changes we made in the Directory will be applied.

RIGHT CLICK THE SKIN ITSELF > THEN CLICK REFRESH SKIN.

[Only registered and activated users can see links. Click Here To Register...]

after that, Try Clicking START...
If your GrandChase Patcher appeared,

IT MEANS ENJOY!

and if your GC patcher didn't appear, it means you need to go back to Customizing the Skin

But hey, This is Easy enough for any Gamer to understand.
so PLEASE!!!
READ Before your CLICK

[HOW TO SHARE]
If you want to share this Skin to your Friends, Please refer back to this Thread,
Share this Thread's Link not the Skin Link.
Sharing is Caring, and if you care, Please Share this Thread instead,
It took me 2 days to Learn Rainmeter Coding and Compiling it to a Skin for Everyone to Enjoy.

[NOTE]
You can't MODIFY any file inside the Skin Folder.

All the IDEA that are stated above is 90% >.< Kyonko's Idea.
Some Meter are Based on some Famous skins called the THEC-Rotator and Enigma Icons, Credits to whoever created those Images.

Thanks for releasing this! Hope it will help others!

Sugoii~ Love it.
Going to use this. =3
Btw, Thank you!

I was playing with my Rainmeter, when an IDEA strikes...

What if i create my own skin....
and while looking for a Background i suddenly bumped on my GC render folder,...

and then the IDEA of Converting the Bypass Program into Rainmeter skin strikes...

and there i was,.... Patcher , Bypass , GC FOLDER , ScreenShot folder button implemented, and thinking,... hmmp i want to share this IDEA with everyone, so i went back to GC Side, and here i was, Sharing this great and very unique idea...

Well I like the Idea but you didn't mention it works only for (x64) I have (x32), Well Good job anyway!!

Install Rainmeter in x32 and it will work on your System...

Both works Fine on my 2 PC, both x64 and x32

I love this !!
I had a suggestion, it would be great if you could make the background character switchable like not just sieg but also the others and switchable circle motif and color !
A clock also good if there's player who play GC from other region ie. I play on NA and I could see NA's local clock from this rainmeter !

It's still in BETA so, suggestion is also good while still in BETA cause i can get more ideas from my comments, ^___^ the idea of switchable character is already on the note,

hard to code it all in one, so i'll just try if this will be a good release or not,
for now, i need all the suggestion from the comments, if i like the suggestion, i'll try implementing it :3

well, that's good thing to hear ^.^
maybe you could also add resizing option (like some skins I used to know :3)

FYI:the installer return an error installation script on me and I must extract it manually using archiver, also the screen shot button isn't working :D

You need to Set the Directory first,
the codes for START button and the other buttons are the same,

they will all fail if the Directory hasn't been set correctly in the settings.

Quote:

Originally Posted by >.< Kyonko You need to Set the Directory first, the codes for START button and the other buttons are the same, they will all fail if the Directory hasn't been set correctly in the settings.

uh, sorry I didn't realize that I don't have ScreenShot directory in my GC folder as in #LOCGC#\ScreenShot, that explains why I can't open SS directory. Everything's works fine !:)
well, in fact now I tried to implement clock for my own private use (not for shared, as you prohibit editing this without permission:handsdown:) and I encountered a problem how I send the clock to the uppermost layer because the clock hid under the skin itself and I forget the script to move it to front :(

Edit:nvm, i just remember that I just need to move it to bottom of the page.

hehehe,

Actually i'm currently working on the CLOCK with the same font like the START button :3
and you need to move it at top not bottom :3

and because you edit it, you can only take a Screenshot but you can't Share it without my permission,

also, You can Comment your edits here, so that i can see how creative my followers are ^___^

By TERMS is that, When you edit it, you can Post a Comment here, with a Screenshot of your work,

Rainmeter is free and all the Skins that are developed,
so i'm changing the rules here,

You can't Edit my work inside the Folder, but you can copy my idea and create you own skin.
if you edit my work, you can only show it to the public by Screenshot but you can't share it...
You can only share your own work.

like the RainmeterSkin website says, you can't edit others work but you can Copy the idea and credit the one who created it, and create you own work based on their idea.

[Only registered and activated users can see links. Click Here To Register...][Only registered and activated users can see links. Click Here To Register...]
Sorry if I remove your nick 'cause I personally never put any name even mine on my desktop :D
I'm still figuring how to change the BYPASS into button type.
I change the path to start GC to make it run ResFeedback cleaner first and lock it both in start and bypass.
I add this and few more also a .ttf inside skin's folder for the clock :

Quote:

[MeasureTime] Measure=Time [MeasureHours] Measure=Time Format=%H ;[MeasureAMPM] ;Measure=Time ;Format=%H ;Substitute="01":"AM", "02":"AM", "03":"AM", "04":"AM", "05":"AM", "06":"AM", "07":"AM", "08":"AM", "09":"AM", "10":"AM", "11":"AM", "00":"AM", "12":"PM", "13":"PM", "14":"PM", "15":"PM", "16":"PM", "17":"PM", "18":"PM", "19":"PM", "20":"PM", "21":"PM", "22":"PM", "23":"PM" [MeasureMinutes] Measure=Time Format=%M [MeasureSeconds] Measure=Time Format=%S [MeasureWeekday] Measure=Time Format=%a [MeterHours] MeasureName=MeasureHours Meter=STRING X=383 Y=208 FontFace=Digiface FontSize=20 FontColor=255, 255, 255, 255 AntiAlias=1 StringAlign=RIGHT StringStyle=BOLD [MeterHoursSDW] MeasureName=MeasureHours Meter=STRING X=3r Y=3r FontFace=Digiface FontSize=20 FontColor=0, 0, 0,80 AntiAlias=1 StringAlign=RIGHT StringStyle=BOLD [Separator1] Text=":" Meter=STRING X=2r Y=-5r FontFace=Digiface FontSize=20 FontColor=255, 255, 255, 255 AntiAlias=1 StringAlign=RIGHT StringStyle=BOLD [Separator1SDW] Text = ":" Meter=STRING X=3r Y=3r FontFace=Digiface FontSize=20 FontColor=0, 0, 0,80 AntiAlias=1 StringAlign=RIGHT StringStyle=BOLD [MeterMinutes] MeasureName=MeasureMinutes Meter=STRING X=29r Y=-1r FontFace=Digiface FontSize=20 FontColor=255, 255, 255, 255 AntiAlias=1 StringAlign=RIGHT StringStyle=BOLD [MeterMinutesSDW] MeasureName=MeasureMinutes Meter=STRING X=3r Y=3r FontFace=Digiface FontSize=20 FontColor=0, 0, 0, 80 AntiAlias=1 StringAlign=RIGHT StringStyle=BOLD [Separator2] Text=":" Meter=STRING X=4r Y=-5r FontFace=Digiface FontSize=20 FontColor=255, 255, 255, 255 AntiAlias=1 StringAlign=RIGHT StringStyle=BOLD [Separator2SDW] Text = ":" Meter=STRING X=3r Y=3r FontFace=Digiface FontSize=20 FontColor=0, 0, 0,80 AntiAlias=1 StringAlign=RIGHT StringStyle=BOLD [MeterSeconds] MeasureName=MeasureSeconds Meter=STRING X=27r Y=-1r FontFace=Digiface FontSize=20 FontColor=255, 255, 255, 255 AntiAlias=1 StringAlign=RIGHT StringStyle=BOLD [MeterSecondsSDW] MeasureName=MeasureSeconds Meter=STRING X=3r Y=3r FontFace=Digiface FontSize=20 FontColor=0, 0, 0, 80 AntiAlias=1 StringAlign=RIGHT StringStyle=BOLD ;[MeterAMPM] MeasureName=MeasureAMPM Meter=STRING X=35r Y=-3r FontFace=Digiface FontSize=20 FontColor=255, 255, 255, 255 AntiAlias=1 StringAlign=RIGHT StringStyle=BOLD ;[MeterAMPMSDW] ;MeasureName=MeasureAMPM ;Meter=STRING ;X=3r ;Y=3r ;FontFace=Digiface ;FontSize=20 ;FontColor=0, 0, 0, 80 ;AntiAlias=1 ;StringAlign=RIGHT ;StringStyle=BOLD

I like this <3!

 Spoiler

[Only registered and activated users can see links. Click Here To Register...]

Soo detailed steps!! +1