THIS GUIDE IS NOT COPIED FROM ANY SITE NONE OF IT. I MADE THIS OUT OF MY HEAD SO IF YOUR GOING TO BITCH ABOUT IT BEING COPIED DONT BECAUSE I......MADE...........THIS.....GUIDE PERIOD.
Ok FIRST of all this im making im not sure if anyone already made one but im making this one because ive had to set so many of them up.
First of all you are going to need .net framework 2.0 (Doesnt have to be 2.0 just framework)
Second you need to download wamp4.0 "Doesnt work with 5.0 as far as i know"
Third your going to need the server files and gameserver files
Server files HERE: [Only registered and activated users can see links. Click Here To Register...] gameserver files HERE:[Only registered and activated users can see links. Click Here To Register...]
And you'll need navicat Navicat for MySQL 8.rar
Alright now we can get started!
1. Extract everything to desktop
2. Go into your C:/Wamp/mySQL/Data And minimize it, on your desktop you have account and my. Take them both highlight cut and paste into C:/Wamp/mySQL/Data then exit that.
3. Go into your myserver folder on desktop and click on accserver and open account.ini
4. This part and from now on is VERY CRUTIAL! if you do not get it right your server wont work. NOW. in account.ini change your servername and acc/pass to whatever you set it as This is for my server setup
[Account1]
SERVERNAME=hottiesEO
LOGINNAME=********
PASSWORD=********
FREE_DEBUG=3
5. Now that you changed that Save, close it and open up Authorize DB, if you didnt change id or pass just keep it the same if you did change as follows.
6. now if you changed that save it, close it and open up config.ini and change as follow again setup for my server.
[System]
LOGINLISTENPORT = 9958
POINTLISTENPORT = 9870
SERVER_FULL_DELAY_SECS = 5000
SERVER_BUSY_DELAY_SECS = 3000
SERVERTITLE = hottiesEO
SERVERNAME = hottiesEO
LOGINNAME = *******
PASSWORD = *******
SERVERIP = *your ip here*
[Database]
DBHOSTNAME=127.0.0.1
DATABASENAME=my
DBUSER=*******
DBPASSWORD=******
7. Now save that close it, if you changed your id/pass open up gameserver and change it then save and close it.
8. Now back up and open up GameServer, and open up config.ini and change as follows and you guessed it my server again.
; 配置文件
[System]
SERVERNAME = hottiesEO
MONSTER_ACTIVE_LIMIT = 4000
ONLINETABLESIZE=600
ONLINEHEARTBEATSECS=600
HEARTBEATKICKSECS=1500
REJOINTIMEWAITSECS=0
[GameServer]
GAMESERVER_IP = *your ip here*
GAMESERVER_PORT = 5816
SND_SIZE = 64000
RCV_SIZE = 16000
[AccountServer]
ACCOUNTSERVER_IP = *your ip here*
ACCOUNTSERVER_PORT = 5816
SND_SIZE = 64000
RCV_SIZE = 16000
[Database]
DB_IP = 127.0.0.1
DB_USER = ******
DB_PW = ******
DB_NAME = my
LOGIN_KEY = dfkKO23k'[cvK934
[InternetPort]
MASTER_IP = *your ip here*
MASTER_PORT = 8653
PORT_SIZE = 53
CURRENT_PORTID = 1
[BusySleep]
LEVEL1 = 20 ; > 1000 sleep 20%
LEVEL2 = 30 ; > 2000
LEVEL3 = 40 ; > 3000
LEVEL4 = 50 ; > 4000
LEVEL5 = 60 ; > 5000
9. Now save that and close it, open up shell.ini and change as follows yep my server :)
; 外壳配置文件
; 2007.10.21
[System]
MAPGROUP_SIZE = 1
ACCEPT_MS = 500
[StreamType]
TYPE = 0 ;0=正常从SOCKET，1=SOCKET记录到文件, 2=从文件读(程序调试用)
[Database]
DB_IP = 127.0.0.1
DB_USER = ******
DB_PW = *******
DB_DB = my
[AccountServer]
ACCOUNT_IP = *your ip here*
ACCOUNT_PORT = 9870
SERVERNAME = hottiesEO
LOGINNAME = ******
PASSWORD = ******
; 登录表尺寸, 10-5000
MAXLOGINTABLESIZE=5000
; 登录表超时秒数，0-86400
LOGINOVERTIMESECS=120
LOGIN_KEY = dfkKO23k'[cvK934
[InternetPort]
MASTER_IP = *your ip here*
MASTER_PORT = 8653
PORT_SIZE = 53
CURRENT_PORTID = 1
Alright! almost done Save that and close. now you should have navicat but first i forgot you gotta setup winmysqladmin.
Open up winmysqladmin and click on my.ini NOW. the tricky part is you gotta remember to change your id/pass if you changed it everywhere else. and click save modified data! then stop service start service and close it.
10. Bring up navicat and set your connection name to your servers name. or whatever you want. Then put your ip address under Host name/IP address and leave port the same whatever id/pass you used for everything else put that and click test connection. it should say connection successful if it doesnt bring back up winmysqladmin and try it again with winmysqladmin running.
Thats it guys your server should be working! :)
make sure to remember that thanks button this guide is made by me HottestOfAl[PM] owner of hottieseo! :)
I forgot to say, if your going to restart alot make sure before you start accountserver.exe you open navicat open your connection go to manage users and double click on root@localhost edit user type in test as pass in both spots "TEST IS THE ONLY THING THAT WILL WORK"
(Im working on fixing the msg. server theirs issues)\
\
So many downloads... 3 thanks =_= come on people dont be greedy
Ok FIRST of all this im making im not sure if anyone already made one but im making this one because ive had to set so many of them up.
First of all you are going to need .net framework 2.0 (Doesnt have to be 2.0 just framework)
Second you need to download wamp4.0 "Doesnt work with 5.0 as far as i know"
Third your going to need the server files and gameserver files
Server files HERE: [Only registered and activated users can see links. Click Here To Register...] gameserver files HERE:[Only registered and activated users can see links. Click Here To Register...]
And you'll need navicat Navicat for MySQL 8.rar
Alright now we can get started!
1. Extract everything to desktop
2. Go into your C:/Wamp/mySQL/Data And minimize it, on your desktop you have account and my. Take them both highlight cut and paste into C:/Wamp/mySQL/Data then exit that.
3. Go into your myserver folder on desktop and click on accserver and open account.ini
4. This part and from now on is VERY CRUTIAL! if you do not get it right your server wont work. NOW. in account.ini change your servername and acc/pass to whatever you set it as This is for my server setup
[Account1]
SERVERNAME=hottiesEO
LOGINNAME=********
PASSWORD=********
FREE_DEBUG=3
5. Now that you changed that Save, close it and open up Authorize DB, if you didnt change id or pass just keep it the same if you did change as follows.
6. now if you changed that save it, close it and open up config.ini and change as follow again setup for my server.
[System]
LOGINLISTENPORT = 9958
POINTLISTENPORT = 9870
SERVER_FULL_DELAY_SECS = 5000
SERVER_BUSY_DELAY_SECS = 3000
SERVERTITLE = hottiesEO
SERVERNAME = hottiesEO
LOGINNAME = *******
PASSWORD = *******
SERVERIP = *your ip here*
[Database]
DBHOSTNAME=127.0.0.1
DATABASENAME=my
DBUSER=*******
DBPASSWORD=******
7. Now save that close it, if you changed your id/pass open up gameserver and change it then save and close it.
8. Now back up and open up GameServer, and open up config.ini and change as follows and you guessed it my server again.
; 配置文件
[System]
SERVERNAME = hottiesEO
MONSTER_ACTIVE_LIMIT = 4000
ONLINETABLESIZE=600
ONLINEHEARTBEATSECS=600
HEARTBEATKICKSECS=1500
REJOINTIMEWAITSECS=0
[GameServer]
GAMESERVER_IP = *your ip here*
GAMESERVER_PORT = 5816
SND_SIZE = 64000
RCV_SIZE = 16000
[AccountServer]
ACCOUNTSERVER_IP = *your ip here*
ACCOUNTSERVER_PORT = 5816
SND_SIZE = 64000
RCV_SIZE = 16000
[Database]
DB_IP = 127.0.0.1
DB_USER = ******
DB_PW = ******
DB_NAME = my
LOGIN_KEY = dfkKO23k'[cvK934
[InternetPort]
MASTER_IP = *your ip here*
MASTER_PORT = 8653
PORT_SIZE = 53
CURRENT_PORTID = 1
[BusySleep]
LEVEL1 = 20 ; > 1000 sleep 20%
LEVEL2 = 30 ; > 2000
LEVEL3 = 40 ; > 3000
LEVEL4 = 50 ; > 4000
LEVEL5 = 60 ; > 5000
9. Now save that and close it, open up shell.ini and change as follows yep my server :)
; 外壳配置文件
; 2007.10.21
[System]
MAPGROUP_SIZE = 1
ACCEPT_MS = 500
[StreamType]
TYPE = 0 ;0=正常从SOCKET，1=SOCKET记录到文件, 2=从文件读(程序调试用)
[Database]
DB_IP = 127.0.0.1
DB_USER = ******
DB_PW = *******
DB_DB = my
[AccountServer]
ACCOUNT_IP = *your ip here*
ACCOUNT_PORT = 9870
SERVERNAME = hottiesEO
LOGINNAME = ******
PASSWORD = ******
; 登录表尺寸, 10-5000
MAXLOGINTABLESIZE=5000
; 登录表超时秒数，0-86400
LOGINOVERTIMESECS=120
LOGIN_KEY = dfkKO23k'[cvK934
[InternetPort]
MASTER_IP = *your ip here*
MASTER_PORT = 8653
PORT_SIZE = 53
CURRENT_PORTID = 1
Alright! almost done Save that and close. now you should have navicat but first i forgot you gotta setup winmysqladmin.
Open up winmysqladmin and click on my.ini NOW. the tricky part is you gotta remember to change your id/pass if you changed it everywhere else. and click save modified data! then stop service start service and close it.
10. Bring up navicat and set your connection name to your servers name. or whatever you want. Then put your ip address under Host name/IP address and leave port the same whatever id/pass you used for everything else put that and click test connection. it should say connection successful if it doesnt bring back up winmysqladmin and try it again with winmysqladmin running.
Thats it guys your server should be working! :)
make sure to remember that thanks button this guide is made by me HottestOfAl[PM] owner of hottieseo! :)
I forgot to say, if your going to restart alot make sure before you start accountserver.exe you open navicat open your connection go to manage users and double click on root@localhost edit user type in test as pass in both spots "TEST IS THE ONLY THING THAT WILL WORK"
(Im working on fixing the msg. server theirs issues)\
\
So many downloads... 3 thanks =_= come on people dont be greedy
