[iBot] Guide - Installation and Use

1. Download

• So first we need to do is to download the latest version of iBot
• Go to this page ( Official iBot Site ) -[Only registered and activated users can see links. Click Here To Register...]

2. The necessary installations

2.1. If you download the latest version of iBot follow this :

• Extract iBot File
• Open It
• Go to folder "iBot_Necessities"
• And in that folder you will found "vcredist_x86"
• Install "vcredist_x86" !

2.2. Now in the same folder we will install regOCX files :

• If you have Windows 7 Or Vista install "regOCXFiles_win7"
• If you have Windows XP install "regOCXFiles_winXP"

For a successful installation it should look like this :

[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]


While installing regOCXFiles if you get some error like this :

[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]

If you get this error follow next guide :

We have to startup computer in safe mode, we will do it on this way :

• Go to Start
• Find "Run" and open it
• In "Run" type "msconfig"
• Go to "Boot" tab
• Check "Safe boot"
• Press "Ok"
• Then just restart your computer and it will start in safe mode

Now in safe mode try to install regOCXFiles

If you get error again, try this :

• Stay in safe mode
• Go to start
• Find "Run" and open it
• Type "cmd"
• Take a look in next pictures

[Only registered and activated users can see links. Click Here To Register...]

This is all what you need to type :

• regsvr32 "Path to \iBot\iBot_Necessities\ccrpprg3N.ocx"
• regsvr32 "Path to \iBot\iBot_Necessities\mscomctl.ocx"
• regsvr32 "Path to \iBot\iBot_Necessities\mswinscn.ocx"
• regsvr32 "Path to \iBot\iBot_Necessities\tabctl3n.ocx"

After every line press enter and you have to get message box like this :

[Only registered and activated users can see links. Click Here To Register...]


If you finish with installing .ocx files, we can back in normal mode :

• Go to Start
• Find "Run" and open it
• In "Run" type "msconfig"
• In "General" tab check "Normal startup"
• Press "Ok"
• Then just restart your computer and it will start in normal mode

2.2. For HackShield we will need "Java" :

• The latest java you can get from : [Only registered and activated users can see links. Click Here To Register...]
• Check "Acept License"
• Download java x64 or x86 depends on your computer

When you download Java just install it and that's it !

3. Extracting

3.1. HackShield :

• Find "[iBot] Hackshield v2.1.rar" in iBot folder "iBot_Necessities"
• Extract it in your Silkroad folder

3.2. edxLoader :

• Find "[edx33] edxSilkroadLoader5.rar" in iBot folder "iBot_Necessities"
• Extract it in your Silkroad folder

1. PHMediaPatcher

1.1. PHMediaPatcher when you want to use iBot :

• Find "PHMediaPatcher" in your Silkroad folder
• Run it ( If you have Windows 7, run it as administrator )
• Check "Custom" and Press "Patch"
• Your Silkroad is ready for iBot

1.2. PHMediaPatcher when you want to start Silkroad normally :

• Find "PHMediaPatcher" in your Silkroad folder
• Run it ( If you have Windows 7, run it as administrator )
• Check "Default" and Press "Patch"
• Your Silkroad is ready for normal starting

2. HackShield

2.1. Running HackShield

• Find "Run Hackshield" in your Silkroad folder
• Run it normally
• Now start Silkroad

Your HackShield have to look like this :

[Only registered and activated users can see links. Click Here To Register...]


3. IPHS

3.1. IPHS Set

• Find "IPHS.ini" in iBot folder and open it
• If you are connecting on HackShield that is on your computer, than write "127.0.0.1" in your IPHS.ini
• If you are connecting on HackShield that is on some other computer, read IPHS from HackShield and copy it into IPHS.ini

4. Running iBot

4.1. Client

• Find "edxSilkroadLoader5" in your Silkroad folder and Run it
• Press "Add" button
• Find "sro_client" and open it
• At "edxSilkroadLoader5" check this : "Multiclient" "NOP Hackshield" "Redirect Gateway Server" "Patch Seed"
• At allready launched iBot copy login port
• Paste that port to "Redirect Gateway Server" - ( Second input ) (Do not replace 127.0.0.1 !!! )
• That's it, you can Launch client now !

[Only registered and activated users can see links. Click Here To Register...]


4.2. Clientless

• At allready launched iBot go to second tab
• Check "Use Clientless" and press "Connect"
• Check "Auto Recon"
• Select your server, enter id and pw and press "C"
• Check "Auto Relog"
• Select your char and press "Select Character"
• If you want you can check "Auto start bot" if you want

5. iBot Options

I will make guide for this later, i rly dont have a time now :D


If you have any questions you can ask here !

I can't find the IHPS in hackshield to see what your talking about there. ya lost me

Quote:

Originally Posted by blackmasks I can't find the IHPS in hackshield to see what your talking about there. ya lost me

Can you write me what you have in your hackshield ?

If you get some error, you didn't install java then

Sorry so my hackshield shows everything yours does, but do I delete 127.0.0.1 and add the IHPS line from my hackshield? Sorry I'm switching from agbot to this one and trying to figure it out.

Quote:

Originally Posted by blackmasks Sorry so my hackshield shows everything yours does, but do I delete 127.0.0.1 and add the IHPS line from my hackshield? Sorry I'm switching from agbot to this one and trying to figure it out.

Replace 127.0.0.1 with IPHS from HackShield :)

why to replace the IPHS. My bot works fine with IPHS: 127.0.0.1

Quote:

Originally Posted by petko why to replace the IPHS. My bot works fine with IPHS: 127.0.0.1

For me it's not working with 127.0.0.1 .. And maybe some1 start HS at another computer .

Yep 127.0.0.1 is the local host address. So it is like going to C:\ and not 192.168.0.1 or \\computername.

Oh and another thing you might want to add to your guide: When you use Win vista/7 32 bit use the "regOCXFiles_winXP.bat".
Because the bat for win7 is using the %WINDIR%\SysWOW64\ path which is only present in 64 Bit OS.

32 Bit OS needs "system32" and not SysWOW64.

But still nice guide.

Nice guide. I spent 2 hours trying to figure out from different guides till i found this one. The thread should be starred :)

PS: pozdrav iz Novog Sada :D

Okay, so i've got a problem.
I do everything right:
1. HS
2. sro client
3. ib0t
4. edx loader -> launch

so this opens a second instance of silkroad.
Can i close the first one? Because when i do, the second one closes at character loading.
Or should i wait for the character to load to close the first instance?

Thx in advance.

Quote:

Originally Posted by cepi Nice guide. I spent 2 hours trying to figure out from different guides till i found this one. The thread should be starred :) PS: pozdrav iz Novog Sada :D Okay, so i've got a problem. I do everything right: 1. HS 2. sro client 3. ib0t 4. edx loader -> launch so this opens a second instance of silkroad. Can i close the first one? Because when i do, the second one closes at character loading. Or should i wait for the character to load to close the first instance? Thx in advance.

You can't turn off the first SRO_Client ... That is the client for HackShield and it must be always ON !

PM me if you need more help :)

iBot geht auch für grindroad :D

on my ibot it says *HS Server busy or down!
after i patched then hackshield then open normal client and pressed start
then opened edx then click launch, by the time i log in my char just b4 it finishes loading it dc on the bot.. idk what the problem could be still.

Hi, when I click 'launch' in edxSilkroadLoader5, this error message came out. What is the problem? Thank you.
[Only registered and activated users can see links. Click Here To Register...]

Ok, i found out the problem. The "Redirect Gateway Server" has a different port number as the iBot. They must be the same number!

Quote:

Originally Posted by sroaddict on my ibot it says *HS Server busy or down! after i patched then hackshield then open normal client and pressed start then opened edx then click launch, by the time i log in my char just b4 it finishes loading it dc on the bot.. idk what the problem could be still.

Check your IPHS in iBot folder, it must be the same like in HackShiled

I'm new sry if i do something wrong lol.
Ok now my problem
I load all those Bot nesse... thingies and do the mediapk patch.
And than run hackshield start launching sro.
Minimize it.
Start the edx make the right ticks.
Start the IBot press on the edx Launch.
And than i logging in my char and the bot don't connect whit the game.
Normally the bot shows the char name but my bot shows nothing. XD

So maybe yu can help me ^^ it would be nice.