GUIDE UPDATED! Note that this working on MapleStory v. 50 GameGuard rev 1139 with the latest Cheat Table, it is attached!
Updates from the old one:
You don't have to change the Unrandomizer value, i'll changed the reg file.
New CT for V. 50
New Adresses
I'm 12 instead of 11 [Only registered and activated users can see links. Click Here To Register...]
Hi, there! Welcome to this guide.
I'm just going to tell you that my english is very bad, i'm 12 years old boy from Sweden.
Step 1
Download the Hack Pack, (it is attached).
Extract everything to a folder.
Open the folder called "Moonlight Engine", press the .reg file and just press yes.
[Only registered and activated users can see links. Click Here To Register...]
Ok, your'e done?
Good!
Step 2
Open MoonLightEngine.exe, and press the "Settings" button.
Press Ctrl+O and select the CT-file which called "GIORA CT- for V. 50.CT"
Open it up.
You will now see some cheats in the list.
You can add another CT later.
Right! Open MLE Bypass 1133.exe, and press Ctrl+B.
Now the MLE Bypass should blink red in 1-2 seconds.
[Only registered and activated users can see links. Click Here To Register...]
Ok, now. Open DXWND, and Execute MapleStory with it.
[Only registered and activated users can see links. Click Here To Register...]
Yay, MapleStory opens, press Play.
The MapleStory is now in window-mode with ML (Moonlight).
Ok, look at Moonlight Engine now.
Some unreadable box pop up, just press OK.
[Only registered and activated users can see links. Click Here To Register...]
Login to your account, so you're ingame.
Press ML, and rightclick on Poo Poo - ZF [X] [ ].
Choose "Change register here".
[Only registered and activated users can see links. Click Here To Register...]
Look on this picture, tick in one box in "ZF", that's what ZF [X] [ ] means. Press OK, look at MapleStory now.
Your'e done! ENJOY!
[Only registered and activated users can see links. Click Here To Register...]
Credits: Ziztey
EDIT:
Fixing restart/dual core problem (may fix):
1. Right click on my computer, then click properties.
2. Go to devices, then device manager.
3. Click the plus sign by the computer(+).
4. Right-click ACPI Multiprocessor PC and click update driver.
5. Select install from a list or specific location (advanced).
6. Select Advanced Configuration and Power Interface (ACPI) PC
7. Go on with installation, and then restart computer.
Credits: The Joker
Hacking attempt detected:
Editing boot.ini:
1. Right click my computer, click properties.
2. Go to advanced.
3. Click Startup and Recovery Settings.
4. Click edit.
5. change /noexecute=optin
to
/noexecute=AlwaysOff.
6. change "multi(0)disk(0)rdisk(0)partition(1)\WINDOWS=" Microsoft Windows XP Professional" /noexecute=optin /fastdetect"
to
"multi(0)disk(0)rdisk(0)partition(1)\WINDOWS=" Microsoft Windows XP Professional" /noexecute=AlwaysOff /fastdetect".
7. Save and restart computer.
Credits: The Joker
HACKPACK UPDATED 31 JAN 2008!
-Not tested
-Not to be held responsible for bans
-Have fun :)
LINK
[Only registered and activated users can see links. Click Here To Register...]
Updates from the old one:
You don't have to change the Unrandomizer value, i'll changed the reg file.
New CT for V. 50
New Adresses
I'm 12 instead of 11 [Only registered and activated users can see links. Click Here To Register...]
Hi, there! Welcome to this guide.
I'm just going to tell you that my english is very bad, i'm 12 years old boy from Sweden.
Step 1
Download the Hack Pack, (it is attached).
Extract everything to a folder.
Open the folder called "Moonlight Engine", press the .reg file and just press yes.
[Only registered and activated users can see links. Click Here To Register...]
Ok, your'e done?
Good!
Step 2
Open MoonLightEngine.exe, and press the "Settings" button.
Press Ctrl+O and select the CT-file which called "GIORA CT- for V. 50.CT"
Open it up.
You will now see some cheats in the list.
You can add another CT later.
Right! Open MLE Bypass 1133.exe, and press Ctrl+B.
Now the MLE Bypass should blink red in 1-2 seconds.
[Only registered and activated users can see links. Click Here To Register...]
Ok, now. Open DXWND, and Execute MapleStory with it.
[Only registered and activated users can see links. Click Here To Register...]
Yay, MapleStory opens, press Play.
The MapleStory is now in window-mode with ML (Moonlight).
Ok, look at Moonlight Engine now.
Some unreadable box pop up, just press OK.
[Only registered and activated users can see links. Click Here To Register...]
Login to your account, so you're ingame.
Press ML, and rightclick on Poo Poo - ZF [X] [ ].
Choose "Change register here".
[Only registered and activated users can see links. Click Here To Register...]
Look on this picture, tick in one box in "ZF", that's what ZF [X] [ ] means. Press OK, look at MapleStory now.
Your'e done! ENJOY!
[Only registered and activated users can see links. Click Here To Register...]
Credits: Ziztey
EDIT:
Fixing restart/dual core problem (may fix):
1. Right click on my computer, then click properties.
2. Go to devices, then device manager.
3. Click the plus sign by the computer(+).
4. Right-click ACPI Multiprocessor PC and click update driver.
5. Select install from a list or specific location (advanced).
6. Select Advanced Configuration and Power Interface (ACPI) PC
7. Go on with installation, and then restart computer.
Credits: The Joker
Hacking attempt detected:
Editing boot.ini:
1. Right click my computer, click properties.
2. Go to advanced.
3. Click Startup and Recovery Settings.
4. Click edit.
5. change /noexecute=optin
to
/noexecute=AlwaysOff.
6. change "multi(0)disk(0)rdisk(0)partition(1)\WINDOWS=" Microsoft Windows XP Professional" /noexecute=optin /fastdetect"
to
"multi(0)disk(0)rdisk(0)partition(1)\WINDOWS=" Microsoft Windows XP Professional" /noexecute=AlwaysOff /fastdetect".
7. Save and restart computer.
Credits: The Joker
HACKPACK UPDATED 31 JAN 2008!
-Not tested
-Not to be held responsible for bans
-Have fun :)
LINK
[Only registered and activated users can see links. Click Here To Register...]