STEP BY STEP VacHack [TUT]

Page 9 of 24 « First 78 9 101119 Last »
09/14/2008 21:32 driving#121
you have to just keep trying. sometimes u get lucky and you get in after 3-5 tries but sometimes it takes 20+ times

register by copying these six lines exactly into the box that pops up after u click register

Name: "mazuki"
Addr1: "mazuki"
Addr2: "darksiderg"
Key1: 2DBB9E5341FE627B18B1DF45EA900C87
Key2: 16A475C08C71A4FFDA81B95A0799C5C2
Chksm: 55
09/14/2008 21:37 HellSpider#122
Quote:
Originally Posted by FLOBOTS View Post
Well I did everything right (Checked it around 4-5 times) but I keep getting the invalid client.

I am running off of vista and im running it as admin. everytime.

However instead of 50 mobs, I used 99. I tried 50 about 10 times but it wouldnt let me in. So I changed it into 99 and tried about 20 times. Also I have a copy of the WHOLE 2moons folder in the acclaim folder. So I have the regular one then a copy just incase something happens.

Any advice?
Remember if you change any value then you have to change some other value in the file to the changed value otherwise the CRC will block you every time. Like if you change 1 to 3 you gotta change a 3 to 1 respectively. :)
09/14/2008 21:42 DarkEvil_222#123
Quote:
Originally Posted by driving View Post
you have to just keep trying. sometimes u get lucky and you get in after 3-5 tries but sometimes it takes 20+ times

register by copying these six lines exactly into the box that pops up after u click register

Name: "mazuki"
Addr1: "mazuki"
Addr2: "darksiderg"
Key1: 2DBB9E5341FE627B18B1DF45EA900C87
Key2: 16A475C08C71A4FFDA81B95A0799C5C2
Chksm: 55
ok thnx alot ;)
09/15/2008 10:06 dtlj17#124
ok more problems. i tried to edit the mobs like u told me to , but when i edited them to look like the digits from the tut (3,1,1), it didnt work. i think i did something wrong cause the mobs were still attacking me. did i have to switch the digits like the tut said or do the numbers i change have to be 3,1,1. cause sometimes i saw this,(2,1,1) for the 9,10,and 11 parameters. the tut said to switch the 9th and 11th parameter. but when i did it, i just changed the digits(2,1,1) to 3,1,1 instead of switching the parameters. i was wondering, should i have 1,1,2 or should i put 3,1,1?


hope u understand what i wrote. i tried to explain it the best way i could.



I also tried to make a vac hack for draco. i changed the same digits from the tut to 3,1,1 for gomeisa, the kraz, the syph, antares, dead eye, tentacles, and tootsie so they wouldnt attack and follow. then i went to their monster digits in the data pack to make them vac to my character. i did what the tut said. i turned the 1000 in the 8th parameter to 100, and i added a 0 to the single digit in the 16th parameter like the tut said. i also tried putting 99 in the 16th parameter but that didnt work either.when i went to test it out, about six mobs would follow me, but 3 of them would keep going right pass me and 3 would sit there and do nothing like they were retarded. they would just wander around like i wasnt even there when i didnt attack them. it was weird, and i knew i did something wrong. can u tell me what u did?




if u can just bare with me, i would really appreciate it. i now im a noob at this, but if u can just help me get this right so i wont have to ask for anymore help.


THANK YOU!!!!!!!!
09/15/2008 11:27 goodmoons11#125
i tried like 10x, i still cant play, always invalid client
09/15/2008 11:59 pvpersid#126
can i hav the ( offset ) of map / or all list ??
make me penik to find pls juat need the offset
can any 1 help ?
09/15/2008 14:16 socressor#127
Hello I have a question...I followed the tuto till Step 10 than I wanted to search

Step 10: Use your cntrl+F skills and search for 1708... you should see a line that says 1708,6,8,20,6,2000,2000,1200,1000,0,0,0,50,2,0,4,2 ,0,0,0,0,0,0,10,5,0,2,12,5.

But when I searched the ,,1708'' it said there wasnt any 1708 :S...so I dont know how to vac the valkyre or any others :(...

my second question...:
Is the non aggro hack...I got the valkyre to non aggro...but When I try the same with other mobs...( I mean I switched the parameters 9 with 11..) then It dont work :(..

someone can tell me whats wrong?...

here my parameter example for Lizardmen knight_
Orginal:
302,Lizardman Knight,0,18,18,1992,0,88,126,15,50,2,6,0,0,0,0,0,0 ,0,0,0,0,0,1.3,3.6,1,1,lizardmanknight,ÀÛ¼ºÁß,0,0, 0,197,27,37,35000,1,1,5,100,65,85,85,2,18,3,190,23 8,8,19,2,2300,1000101,

Switched:
302,Lizardman Knight,0,18,18,1992,0,88,126,15,50,2,6,0,0,0,0,0,0 ,0,0,0,0,0,1.3,3.6,1,1,lizardmanknight,ÀÛ¼ºÁß,0,0, 0,197,27,37,35000,5,1,1,100,65,85,85,2,18,3,190,238,8,19,2,2300,1000101,

Anyone know whats wrong? :(

graz

Socressor
09/15/2008 16:26 jefimrox#128
Hi Guys =)
I got it work normal in my home ^^'

Only need stil trying :)

But if any1 know, how i can make VINE SOUL ( boss spider of abyss ) stop hit me :S
He continue hiting :S
i'm bored of this u.u
09/15/2008 17:42 DarkEvil_222#129
Ok i got almost everything to work heheh but 1 thing i cant do, and what i do not understand from the TUT.

When to make more mobs chase you you have to go to look for the 8th and 16th parameter (1000 and 2)

But sometimes the 16th parameter is a 4, or a 3, and when i change it and try to play i get black screen, not even the loading screen..

Also in the tut he said never to just remove or add a zero somewhere but replace it, how?? i do know how to delete it but i think thats the thing im doing wrong, someone explain this pls :)
09/15/2008 17:44 Хакер#130
hää seit wan hat 2moon ne VAC anticheater centrale oder verstehe ich da was nicht !!
09/15/2008 20:14 HellSpider#131
Quote:
Originally Posted by dtlj17 View Post
ok more problems. i tried to edit the mobs like u told me to , but when i edited them to look like the digits from the tut (3,1,1), it didnt work. i think i did something wrong cause the mobs were still attacking me. did i have to switch the digits like the tut said or do the numbers i change have to be 3,1,1. cause sometimes i saw this,(2,1,1) for the 9,10,and 11 parameters. the tut said to switch the 9th and 11th parameter. but when i did it, i just changed the digits(2,1,1) to 3,1,1 instead of switching the parameters. i was wondering, should i have 1,1,2 or should i put 3,1,1?


hope u understand what i wrote. i tried to explain it the best way i could.



I also tried to make a vac hack for draco. i changed the same digits from the tut to 3,1,1 for gomeisa, the kraz, the syph, antares, dead eye, tentacles, and tootsie so they wouldnt attack and follow. then i went to their monster digits in the data pack to make them vac to my character. i did what the tut said. i turned the 1000 in the 8th parameter to 100, and i added a 0 to the single digit in the 16th parameter like the tut said. i also tried putting 99 in the 16th parameter but that didnt work either.when i went to test it out, about six mobs would follow me, but 3 of them would keep going right pass me and 3 would sit there and do nothing like they were retarded. they would just wander around like i wasnt even there when i didnt attack them. it was weird, and i knew i did something wrong. can u tell me what u did?




if u can just bare with me, i would really appreciate it. i now im a noob at this, but if u can just help me get this right so i wont have to ask for anymore help.


THANK YOU!!!!!!!!
The 9'th parameter is the AI Key. It's not that simple that you change the 9'th and the 11'th parameter to each other. The 11'th is not important for a VAC or Non-Aggro. You have to change the AI Key depending on what kind of mob it is. It's good to know what each value in the 9'th parameter does. Then you change the 9'th value to a value that makes the mob follow or not to attack. But then if we say like you changed a 1 to a 3. Then you need to find a 3 that is not important and change it to 1. Try with that. :)

Note: Referring to the 9'th parameter from the lowercase name of the mob in monster section of packfile.
09/15/2008 21:03 lex22#132
Quote:
Originally Posted by run4fun2222 View Post
Alright I'm gonna try to reply to all of you here:

Mr. Yoda - I've found that by changing many mobs or some high level mobs, I am unable to login (yes i've tried 50 times). however, when I just change the parasites and rock pressures of parca, i'm completely capable of logging in (as well as some castor 2F monsters... etc). Is it possible that you can only try to vac just a few of them instead of all of them to solve your problem? (by the way, sometimes it DOES take more than 20 tries)

Follow up: I'm writing a program that clicks the character, clicks the server, then clicks connect and waits. I'm hoping that if i ever needed to do a mass login overnight to vac a lot of things, I'd do it that way

lex: c'mon man... decimal mode, it's been said 20 times already




zelocos: Yes, most of the time for my vac's it either works in under 7 tries, or doesn't work for more than 50 (never)

dtlj17: NO and I hope there never is. I am almost willing to sell some vachacks though for decent dil. =)

polose69: I used XP, just changed the target line... worked perfectly fine for me... honestly I have no idea what you could be doing wrong.

MrYoda(again): I ALWAYS have Wallhack(for select maps), speedhack(for select maps), and ZOOM hack (thanks to mithandir). I often use non-aggro hacks for many monsters so they leave me alone. I don't vac that many mobs... almost at all, because after I pull them over, they enjoy running away from me anyway... Wall Speed Zoom (abbreviated WSZ on all my data pack mods never effect invalid client for me).

I'm also hoping I can figure out/someone else can, a bypass completely for the CRC checks, therefore I can vac everything (I already have a file set to that) =P
Sorry to dissapoint you , but I am not really used to using this winhex program. And there is nothing called ''decimal mode'' in the go to offset screen .... But there is some thing called "Dwords" on the side tab wich is located beside the box wich the offsets value goes into. If that is not the decimal mode, could you please be a little bit more specific to as where the "decimal mode option is located??
09/15/2008 21:24 essetee#133
Quote:
Originally Posted by lex22 View Post
Sorry to dissapoint you , but I am not really used to using this winhex program. And there is nothing called ''decimal mode'' in the go to offset screen .... But there is some thing called "Dwords" on the side tab wich is located beside the box wich the offsets value goes into. If that is not the decimal mode, could you please be a little bit more specific to as where the "decimal mode option is located??
Just click on the hex numbers and they will change in decimal.
09/15/2008 21:26 HellSpider#134
Quote:
Originally Posted by lex22 View Post
Sorry to dissapoint you , but I am not really used to using this winhex program. And there is nothing called ''decimal mode'' in the go to offset screen .... But there is some thing called "Dwords" on the side tab wich is located beside the box wich the offsets value goes into. If that is not the decimal mode, could you please be a little bit more specific to as where the "decimal mode option is located??
Dword is double-words. It's not the thing your looking after. To change the offsets to decimal :

1) Press F5
2) Uncheck box with "Hexadecimal Offsets"
3) Done !

Press thanks if i helped :).
09/15/2008 22:48 run4fun2222#135
Lol lex, the point was that it was saiod counless times already...

And I just wanted to say that i'm really happy that everyone is using my HUGE programming vocabulary... specifically the word "parameter" lol
Page 9 of 24 « First 78 9 101119 Last »