[ALL SRO] edxSilkroadLoader Beta

does it support redict ip ? my english isnt the best to understand everything

Quote:

Originally Posted by Botter1993 does it support redict ip ? my english isnt the best to understand everything

Yes it does.

Quote:

Originally Posted by saiyansrule Are you sure you're using the right port?... it works for me.

I tried it again after your response, and it seems like it had something to do with my pc etc, and not the loader. Its working now like a charm.

hi all
need help pls, i cant tipe in the image code, there is no screen to tipe it in, nothing appears, if i press connect it makes veryfication image code an say something in korean, dont understand that -.-

pls need help

Hey pushedx. i would just like to say nice work on this loader. But ive got a problem with it now. Ive had it working for roughly 3-4 days and while i was using it i was quite impressed. But now when i go to open the edxSilkroadLoader_Lite.exe in the bin folder i get a error message every time. It says on the error message.

"edxSilkroadLoader_Lite.exe has encounterd a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of somthing, the information you were working on might be lost.
Please tell microsoft about the problem."

I think you know what error message i mean :P
but yea. i get this error message everytime now. ive deleted the loader and files, redownloaded the edxSilkroadLoader_Lite.rar and extracted the files, and tried again but i still get the error. Any ideas of whats wrong or what i may be doing wrong?
Thanx mate for the time and effort into this great tool.

My Status Report:

iSRO(v1.211) = Working Perfect (loader/login/ingame)
cSRO(v1.149) = Working Perfect (loader/login/ingame)
tSRO(v1.207) = Working Perfect (loader/login/ingame)
vSRO(v1.052) = Working Perfect (loader/login/ingame)
kSRO(v1.634) = Not Tested Yet
jSRO(v1.066) = Doesnt Work

[Only registered and activated users can see links. Click Here To Register...] - i unpacked the client with stripper_v213b9 before using the loader.

and heres that DIVISIONINFO.txt that you needed for jSRO.
[Only registered and activated users can see links. Click Here To Register...]

Quote:

Originally Posted by gigglier Except for the redirect, but that could be just me. Tried different settings but failled everytime when using redirect. (tSro) Anyone who could use it with redirect on tSro ?

Same problem here. Also my loader does not show check boxes for setting selection, is this normal any help would be awsome!!

I've been using this loader ever since the latest TSRO update and it works like a charm.

Good that you didn't turn your back on SRO (yet), Drew :)

Ok i can see by the above post i could have been a little more detailed in my question. I'm trying to use to edxloader with a certain bot whose name shall not be mentioned and to do this i must redirect the ip. I cannot find any where in the edxloader how to redirect the ip. Is there something i missed, hidden information boxes, check boxes ect.? I D/L edxsilkroadloader_beta. It unrared into 1 app. file and 1 DLL. file. both were put into the silkroad directory and a short cut was made for desk top.

Quote:

Originally Posted by RockStar21 Ok i can see by the above post i could have been a little more detailed in my question. I'm trying to use to edxloader with a certain bot whose name shall not be mentioned and to do this i must redirect the ip. I cannot find any where in the edxloader how to redirect the ip. Is there something i missed, hidden information boxes, check boxes ect.? I D/L edxsilkroadloader_beta. It unrared into 1 app. file and 1 DLL. file. both were put into the silkroad directory and a short cut was made for desk top.

after opening the loader, click "Launch!" and you'll see the redirect option

Quote:

Originally Posted by saiyansrule after opening the loader, click "Launch!" and you'll see the redirect option

Ok im going freeking insane here, I have opened this loader to many times now and still cannot find where i redirect ip or change port, wtf am i doing wrong!!!
when i open the loader only option is to add or delete target directory and launch, nothing else can be changed at this screen. I launch and a Debug console opens, cant change anything there, after that game menu comes up, nothing to do there but check the correct server and log in. OMG WTF WTF WTF !!! as i said im going insane.

Quote:

Originally Posted by RockStar21 Ok im going freeking insane here, I have opened this loader to many times now and still cannot find where i redirect ip or change port, wtf am i doing wrong!!! when i open the loader only option is to add or delete target directory and launch, nothing else can be changed at this screen. I launch and a Debug console opens, cant change anything there, after that game menu comes up, nothing to do there but check the correct server and log in. OMG WTF WTF WTF !!! as i said im going insane.

Cant you read? he said after opening click launch and you will see. so click the freakin launch button u idiot. dont come back spamming when you havnt actually read the post properly. you havnt tried everything because ur so bloody stupid. and i hope you realise it when u find the redirect ip.

Heres some steps and read frikkin carefully

1. open the edxSilkroadLoader_Lite.exe
2. Click "Add" and choose your "sro_client.exe" in the directory it is installed in.
3. Choose the Silkroad directory you wish to launch.
4. Choose the Division server and Login server you wish to start the client with.
5. Press Launch!
6. now you will see the redirect ip.
Btw make sure you have downloaded the "edxSilkroadLoader_Lite" and not the "edxSilkroadLoader" as the lite version is the one with redirect.
and to download its on page 1 at the top of pushedx post.

credits to pushedx for the steps, copy and pasted 2 -5 steps from his notepad doc.

Great work pushedx. I've been using your loader for a couple days now on tSRO, and most of the time it works fine. Sometimes however, a client is started without me ever having clicked the Start button. Not 100% sure, but I think it doesn't happen as long as I don't touch the Launch button.

Redirect IP doesnt work.
Dont waste ur time with that shitty loader just wait for testosterone.
Most people dont need nude patch and infinity zoom but the IP redirection.

Quote:

Originally Posted by RockStar21 Ok im going freeking insane here, I have opened this loader to many times now and still cannot find where i redirect ip or change port, wtf am i doing wrong!!! when i open the loader only option is to add or delete target directory and launch, nothing else can be changed at this screen. I launch and a Debug console opens, cant change anything there, after that game menu comes up, nothing to do there but check the correct server and log in. OMG WTF WTF WTF !!! as i said im going insane.

I think you are using the first version. Please recheck the first post in the thread. I have removed that version now so people don't accidentally use it. If you need any other help, just send me a PM.

Quote:

Originally Posted by r7slayer Hey pushedx. i would just like to say nice work on this loader. But ive got a problem with it now. Ive had it working for roughly 3-4 days and while i was using it i was quite impressed. But now when i go to open the edxSilkroadLoader_Lite.exe in the bin folder i get a error message every time. It says on the error message. "edxSilkroadLoader_Lite.exe has encounterd a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of somthing, the information you were working on might be lost. Please tell microsoft about the problem." I think you know what error message i mean :P but yea. i get this error message everytime now. ive deleted the loader and files, redownloaded the edxSilkroadLoader_Lite.rar and extracted the files, and tried again but i still get the error. Any ideas of whats wrong or what i may be doing wrong? Thanx mate for the time and effort into this great tool.

Try this:

1. Open Windows Explorer and type in: "%appdata%/edxLabs/edxSilkroadLoader"
2. Delete the "edxSilkroadLoader.ini" file
3. Start the program and see if it works.

Please PM me if you can't get it or need other help.

Quote:

Originally Posted by Kazuya¹ My Status Report: iSRO(v1.211) = Working Perfect (loader/login/ingame) cSRO(v1.149) = Working Perfect (loader/login/ingame) tSRO(v1.207) = Working Perfect (loader/login/ingame) vSRO(v1.052) = Working Perfect (loader/login/ingame) kSRO(v1.634) = Not Tested Yet jSRO(v1.066) = Doesnt Work [Only registered and activated users can see links. Click Here To Register...] - i unpacked the client with stripper_v213b9 before using the loader. and heres that DIVISIONINFO.txt that you needed for jSRO. [Only registered and activated users can see links. Click Here To Register...]

Thanks, I have jSRO already, but I need to get the client unpacked. I'll try that stripper program since I can't find any OllyDbgScripts that work for it. However, upon starting the regular jSRO client, GameGuard seems to start, which doesn't work on Win7, so I can't get it to load. Does gameguard start for you too without using the loader?

Quote:

Originally Posted by RockStar21 Same problem here. Also my loader does not show check boxes for setting selection, is this normal any help would be awsome!!

Just send me a PM if you need some help. :) That goes for anyone who needs help, it's hard following all the posts in this thread. I don't want to start a new thread yet because I'm working on some other stuff to use in my loader so I don't have a new release ready.

Quote:

Originally Posted by raido73 Great work pushedx. I've been using your loader for a couple days now on tSRO, and most of the time it works fine. Sometimes however, a client is started without me ever having clicked the Start button. Not 100% sure, but I think it doesn't happen as long as I don't touch the Launch button.

If you hit esc, enter, or close the dialog, it will start the client automatically. The reason for that behavior was for my debugging and I didn't take it out. I have plans on changing that in the future as well as saving the last configuration so you don't have to reconfigure each client if you do not want to.