it really works....it made my yard suspended lol.... i recieved oops after i changed 00000120 to 00001008....
BACKYARD MONSTER INSTANT RESOURCES
09/18/2011 06:18
kampfer101#76
09/18/2011 06:24
BustahBoi#77
This cheat does work but it changes now and then!
sumtimtes its the first or second black one on the list and when u check just go up about 10 spaces and u should see movq xmm1 ,[ebp-00000120] if you dont see it then check another black one on the list and scroll 10 spaces up! reapeat until u find it!
the only thing ive found is that u get 0 resources when ur upgrading while trying to do this or if you are repairing! otherwise it still works!
thats just my experience while using this and im using ce 5.6 and mozilla firefox!
:mofo: :D
sumtimtes its the first or second black one on the list and when u check just go up about 10 spaces and u should see movq xmm1 ,[ebp-00000120] if you dont see it then check another black one on the list and scroll 10 spaces up! reapeat until u find it!
the only thing ive found is that u get 0 resources when ur upgrading while trying to do this or if you are repairing! otherwise it still works!
thats just my experience while using this and im using ce 5.6 and mozilla firefox!
:mofo: :D
09/18/2011 06:44
Arline#78
The first few times I've tried today, the code has worked brilliantly, but until my last post it stopped working. x.x Just now, after several unsuccessful attempts to find it, I decided to close and reopen my browser altogether to retry. This time though, I got caught and am now under 7 day suspension. lol
I've noticed though, the first few times I tried earlier today, were in fact second or third black code. And I didn't have to scroll too far up. On the final try before I'd been suspended, I had to scroll down (cuz I didn't find anything scrolling up). When I changed it, it worked fine. But when I switched tabs to click on a link and switched back, it logged the error and I found myself suspended. :P Bad luck I guess.
For the hard work of finding the code and sharing it with all of us, I'd like to thank archdeacon. And because I'm not sure how to give back beyond a thanks, I thought I'd explain in detail (hopefully), how I winded up with a suspension since u were curious. Appreciate your effort arch~ ^^
I've noticed though, the first few times I tried earlier today, were in fact second or third black code. And I didn't have to scroll too far up. On the final try before I'd been suspended, I had to scroll down (cuz I didn't find anything scrolling up). When I changed it, it worked fine. But when I switched tabs to click on a link and switched back, it logged the error and I found myself suspended. :P Bad luck I guess.
For the hard work of finding the code and sharing it with all of us, I'd like to thank archdeacon. And because I'm not sure how to give back beyond a thanks, I thought I'd explain in detail (hopefully), how I winded up with a suspension since u were curious. Appreciate your effort arch~ ^^
09/18/2011 10:47
archdeacon#79
i don't think so you'll get those personally i am using this code everyday better be luck next time if this code does that kind of error with you. :)Quote:
it really works....it made my yard suspended lol.... i recieved oops after i changed 00000120 to 00001008....
Quote:
I've noticed though, the first few times I tried earlier today, were in fact second or third black code. And I didn't have to scroll too far up. On the final try before I'd been suspended, I had to scroll down (cuz I didn't find anything scrolling up). When I changed it, it worked fine. But when I switched tabs to click on a link and switched back, it logged the error and I found myself suspended. :P Bad luck I guess.
For the hard work of finding the code and sharing it with all of us, I'd like to thank archdeacon. And because I'm not sure how to give back beyond a thanks, I thought I'd explain in detail (hopefully), how I winded up with a suspension since u were curious. Appreciate your effort arch~ ^^
i am doing the same procedure as i instructed to do so with this code,yap it does change from 1st scan to 2nd scan so i edited the instructions given at the first page and must read to avoid unnecessary errors,all members under my alliance are all using the same code and instructions posted in here as well as you do and we found it no harm if this code was properly done within my instructions.
but it seems like you are already suspended using this code my apology,but under my alliance it is working fine. at first i had 20 members active under my alliance using this and me we encounter no harm or any error using this code.
All that i can advice is read very carefully on what was the instruction given except if you are trying to experiment this code that will result for suspension and warning. :)
09/19/2011 05:41
LLewoR#80
still working for me
09/19/2011 06:14
archdeacon#81
nice:)Quote:
09/19/2011 06:26
LLewoR#82
arch if you have instant upgrade and fortify can you please tell if its ok with you thanks again for the cheats ;)
09/19/2011 06:32
cactus78#83
for some reason when i change the code and press ok it automatically changes movq to movd.
09/19/2011 06:46
archdeacon#84
i only got rapid upgrade and my code to fortify is not working for now it only gives me a black screen and have to reload the game,currently fixing that code. i've read threads about this maybe they can help you about fortify. :)Quote:
by that point i can say that you've picked the wrong address code to disassemble. please read the instructions very carefully from were to get the right code. :)Quote:
09/19/2011 07:02
cactus78#85
changed to CE 5.6.1 and worked first time.
U sir are a deadset legend :)
U sir are a deadset legend :)
09/19/2011 08:48
jcharles#86
1. Open BYM & CE
2. Open process, check Also Scan Read Only Memory & change Value type into Array of Bytes
3. Scan this code 0F 84 B5 04 00 00
4. This will found 8 addresses that matched with your last scan,choose 2nd 3rd 4th Black Address,right click & disassemble
5. From the highlighted address scroll up a bit until you see movq xmm1 ,[ebp-00000120]
6. double click and edit the code to movq xmm1 ,[ebp-000012] and ok
7. Edit add esp,10 to add esp,33
Just copy sir i got this working
2. Open process, check Also Scan Read Only Memory & change Value type into Array of Bytes
3. Scan this code 0F 84 B5 04 00 00
4. This will found 8 addresses that matched with your last scan,choose 2nd 3rd 4th Black Address,right click & disassemble
5. From the highlighted address scroll up a bit until you see movq xmm1 ,[ebp-00000120]
6. double click and edit the code to movq xmm1 ,[ebp-000012] and ok
7. Edit add esp,10 to add esp,33
Just copy sir i got this working
09/19/2011 09:55
allan2011xp#87
i can't find add esp 10 hmmm
09/19/2011 13:13
G3I3N3#88
Hi, i can't find "movq xmm1 ,[ebp-00000120]" anywhere :(
but i have the the first black and the others green!?
someone know how to solve it?
but i have the the first black and the others green!?
someone know how to solve it?
09/19/2011 16:55
archdeacon#89
hahaha :)Quote:
U sir are a deadset legend :)
there must be the said Opcode if you get the right black address try to re-select your process and repeat the same procedure, or re-scan it again. :)Quote:
but i have the the first black and the others green!?
someone know how to solve it?
nice :)Quote:
2. Open process, check Also Scan Read Only Memory & change Value type into Array of Bytes
3. Scan this code 0F 84 B5 04 00 00
4. This will found 8 addresses that matched with your last scan,choose 2nd 3rd 4th Black Address,right click & disassemble
5. From the highlighted address scroll up a bit until you see movq xmm1 ,[ebp-00000120]
6. double click and edit the code to movq xmm1 ,[ebp-000012] and ok
7. Edit add esp,10 to add esp,33
Just copy sir i got this working
09/19/2011 16:58
bagarospazzo#90
stuck at 0 for me...