Cracking SV

How u crack SV with hex? when i crack it by DIY steps 1) and 2) and want to on SV its crash!

PLEASE HELP ?

Quote:

Originally posted by jivanhoo1@May 7 2007, 13:52 is it compatible with multi client?? i am using the ones that made by a1blaster....

Works perfectly on my multiclient i don't use anyone elses i make my own so i can't say if it works on blasters..Allthough i been getting alot of pm's lately since 4347 sayin SV doesn't work on there multiclients they downloaded so i can only assume alot of people didn't do it right again and have posted 500 of em that don't work right as usual.

I made one where u dont need to click start.. but get slow down..
than I tried video one.. here it doesnt freeze .. it goes to the "wrong log/pass".. but I still openned the cracked SV.. and tried.. worked.. but.. slow down after 30 min again :(
any help? :/

when doing the hexedit version do we still need to go through steps 1-6 or do we just do the steps that you have listed under the hexedit version. Sorry for sounding noob i just dont want to only do the hexedit part and then of needed to do the rest or vice versa. Thank you in advance for the help.

ants ok done it. too soem time to understand that +krama for u
edit*
it dun work again. only worked once. but i actually opened CE also
maybe someone shead some light on this ?

I realy can't do the DIY... i dont know what realy put on hex! and if need open the Cheat Engine! i'll crazy auhauhauh!

Quote:

Originally posted by wizard62486@May 7 2007, 19:30 when doing the hexedit version do we still need to go through steps 1-6 or do we just do the steps that you have listed under the hexedit version. Sorry for sounding noob i just dont want to only do the hexedit part and then of needed to do the rest or vice versa. Thank you in advance for the help.

Quote:

when doing the hexedit version do we still need to go through steps 1-6 or do we just do the steps that you have listed under the hexedit version. Sorry for sounding noob i just dont want to only do the hexedit part and then of needed to do the rest or vice versa. Thank you in advance for the help.

Mmmm...Ya this man is right asking that. (Lolz)
Ya i want know too if we have to do all steps before the new "DIY hexedit" with only 2 steps. Or only "DIY hexedit" (I DooB PoWa !! xD)

can any1 make bmp solucion plx ? from this clicking on move i dont get anything just click click i cant get it to work

Just follow the step 1 and 2

Run SV, but DONT put any on the ID and Pass.

Press F11, and BOOM
:D

YOu have CRaCK it. :bandit:

Quote:

Originally posted by bladefire@May 7 2007, 17:14 Just follow the step 1 and 2 Run SV, but DONT put any on the ID and Pass. Press F11, and BOOM :D YOu have CRaCK it. :bandit:

But this is for standalone! i need know how to do the DIY i download the little movie try do the same and nothin!! i'm one losser huauhahua"!

THx. I was a litle bit stupid because i always use id/pw.
it works perfect. THX again

bladefire +k for that info TY!!!

anantasia +k for another badass crack you took it a step further this time bro.

Im still waiting someone to tell me how i can avoid the SV slow down...
Thank you

ok thank you for the fast reply to my question. I will try doing steps 1 and 2.

Quote:

Originally posted by soymadmax+May 7 2007, 13:42--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (soymadmax @ May 7 2007, 13:42)</td></tr><tr><td id='QUOTE'> I cracked succesfully SV using cheat engine every time i load it. Im trying to hexedit SV so i will not need cheat engine, but i dont understand the way. U said: --------------------------------------- *New* DIY hexedit Scriptvessel (No need CheatEngine) 1) Open Hexedit and goto offset &#036;49FB then write code E9 C1 2B 02 00 2) got offset &#036;275C1 then write code QUOTE 81 3D 04 40 04 10 FF 00 00 00 CMP [10044004],000000FF 74 25 JE 004275F2 60 PUSHAD 9C PUSHFD 68 00 00 00 00 PUSH 00000000 68 00 00 00 10 PUSH 10000000 68 D0 39 00 10 PUSH 100039D0 6A 02 PUSH 02 FF 15 64 E4 42 00 CALL DWORD PTR [0042E464] C7 05 04 40 04 10 FF 00 00 00 MOV [10044004],000000FF 9D POPFD 61 POPAD 55 PUSH EBP 53 PUSH EBX 51 PUSH ECX 50 PUSH EAX 52 PUSH EDX 9C PUSHFD 50 PUSH EAX 56 PUSH ESI 57 PUSH EDI E9 04 D4 FD FF JMP 00404A04 ------------------------------------------- I open SV with XVI, then i goto 49FB and i do this: [Only registered and activated users can see links. Click Here To Register...] Then i go to 275C1 and i do: [Only registered and activated users can see links. Click Here To Register...] Then i save and execute SV Cracked, but the program dont open. I suposse im writting wrong the code, can u explain for dumbs as me how to enter the code correctly to the .exe? Ty very much. Very nice job Anantasia!!! [/b]

u do not insert the hex string you modify the hex string... what i mean is

eg.

@ address 1234

1A 2B 3C 4D 56 67 78 89 00

you're supposed to change it to

00 01 10 11 04 40 20 23 30

not insert it and make it into something like

00 01 10 11 04 40 20 23 30 1A 2B 3C 4D 56 67 78 89 00

its something like that

note: this is just an example....

<hr>Append on May 8 2007, 02:36<hr>

Quote:

Originally posted by -TomasLT@May 7 2007, 14:35 If u instal newest patch 4347 u hawe download new multi-client!!!!! u can download MultiDePar4347V1.0.rar from here: [Only registered and activated users can see links. Click Here To Register...] But i hawe problem with cracking SV with hex! when i cracked and use any id/pw and press START i got message "scriptvessel.exe has encountered a problem and needs to close. We are sorry for the inconvenience. " So i need i litle bit help!!!!

do give credits to a1blaster since u're posting his work....

<hr>Append on May 8 2007, 02:37<hr>

Quote:

Originally posted by -soymadmax@May 7 2007, 17:30 I finally hexedit the file, step by step, following the example video. I think i did all ok (same hexcode on my sv than in the video example). But when i opened saved sv and pressed start it stoped (The program has done not valid operation and must be closed... :\ ) Any tip about? TY

you don't need to press start. the hex edit if done properly, you can activate the bot without logging in. just need to open sv then press F11 for the bot to work

<hr>Append on May 8 2007, 02:38<hr>

Quote:

Originally posted by -bulybulybulybulybuly@May 7 2007, 17:00 y have a problem here , cracking SV with hex! y got an error after y put id and password and start "scriptvessel.exe has encountered a problem and needs to close. We are sorry for the inconvenience" <hr>Append on May 7 2007, 17:03<hr> Plz help ...

try redoing the hex edit again.... you could have made a mistake

<hr>Append on May 8 2007, 02:38<hr>

Quote:

Originally posted by -netknight@May 7 2007, 23:11 Im still waiting someone to tell me how i can avoid the SV slow down... Thank you

if you're using the new CT or hexedited sv JUST DON'T LOGIN.

the standalone solves the problem

you can activate the bot after you start sv

<hr>Append on May 8 2007, 02:39<hr>

Quote:

Originally posted by -willianaxlrose@May 7 2007, 21:26 Quote: Originally posted by -bladefire@May 7 2007, 17:14 Just follow the step 1 and 2 Run SV, but DONT put any on the ID and Pass. Press F11, and BOOM :D YOu have CRaCK it. :bandit: But this is for standalone! i need know how to do the DIY i download the little movie try do the same and nothin!! i'm one losser huauhahua"!

its the same for the hex edited one

<hr>Append on May 8 2007, 02:40<hr>

Quote:

Originally posted by -kupidon@May 7 2007, 19:54 Quote: Originally posted by -wizard62486@May 7 2007, 19:30 when doing the hexedit version do we still need to go through steps 1-6 or do we just do the steps that you have listed under the hexedit version. Sorry for sounding noob i just dont want to only do the hexedit part and then of needed to do the rest or vice versa. Thank you in advance for the help. Quote: when doing the hexedit version do we still need to go through steps 1-6 or do we just do the steps that you have listed under the hexedit version. Sorry for sounding noob i just dont want to only do the hexedit part and then of needed to do the rest or vice versa. Thank you in advance for the help. Mmmm...Ya this man is right asking that. (Lolz) Ya i want know too if we have to do all steps before the new "DIY hexedit" with only 2 steps. Or only "DIY hexedit" (I DooB PoWa !! xD)

you'll just need to do the hex edit and that's it. no more cheat engine..

just run the sv and go to conquer and press F11

<hr>Append on May 8 2007, 02:42<hr>

Quote:

Originally posted by -bjorknick@May 7 2007, 06:09 I made just like the vid... but my SV doesnt freeze :( dunno why :/

if you're using the standalone

it won't freeze you don't even need to login just start sv and go to your conquer and press F11

<hr>Append on May 8 2007, 02:43<hr>

Quote:

Originally posted by -pokey2@May 7 2007, 10:36 I had a problem saving the XVI thing. Can anyone help? It came up with an error. Do I need to check the box on the cheat engin thing before I change everything? (I was following the video)

you need to close your sv b4 you can save using the XVI

hope that helps

<hr>Append on May 8 2007, 02:46<hr><!--QuoteBegin--ama@May 7 2007, 14:00
+ karma anastacia, nice job

It worked fine... but after all i have a problem. I installed multiclient after and now i get a msg error when i press F11. with step 1 and 2 in the error, i need to reinstall the client and manually patch it. So if i reinstall te client, then install muilticlient again, will it work then with multiclient?

Anyone an idea, because i dont know why it wont work with multclient.

greetz [/quote]
try using another multi-cilent try a1blaster 's

[Only registered and activated users can see links. Click Here To Register...]