[Release] RRaidBot (Big and Mini Raid)

Page 5 of 20

09/23/2013 00:39 trolleras9#61

yes solved but you didnt saw my edit so i post it again
when sunk and reconnects , many npcs interrupt repairing so bot stacks in the same place trying to repair, trying to go to raid the afte like 2 mins goes to a random place to join raid
you could make it repair lik 10% of life and go to corner of map repair full and rejoin raid

09/23/2013 00:46 passit12#62

Quote:

Originally Posted by trolleras9

yes solved but you didnt saw my edit so i post it again
when sunk and reconnects , many npcs interrupt repairing so bot stacks in the same place trying to repair, trying to go to raid the afte like 2 mins goes to a random place to join raid
you could make it repair lik 10% of life and go to corner of map repair full and rejoin raid

If i am reading this right, you are getting hit by NPCs when trying to repair in the normal map, and is making the repair take longer?
To fix this you want me to make it rep to 10%, then when it reaches 10% go to the corner, rep full, and join the raid and continue like normal?

I am sorry, but I will not be doing this, the more features I add, the more slower the script becomes, and the more chance for an error in the code creating more problems.
In order to get around this issue you have described, simply use the bot when in levels 1-5. Thus no NPCs will interrupt your repairing.

09/23/2013 00:52 trolleras9#63

ok , understood, but another suggestion ,when amaterasu comes out, to ignore sunbursts and shoot it?because now it comes near amaterasu but before shoot it, some sunbursts pass by and shoot them first

09/23/2013 02:39 Gohunther#64

Der bot geht bei mir nich mal an es steht im Scarscript

Compiler Hint 15 Variable GRPX1 never used
Compiler Hint 15 Variable GRPY1 never used
Compiler Hint 15 Variable GRPX2 never used
Compiler Hint 15 Variable GRPY2 never used
Compiler Hint 23 Variable FOUNDGROUP never used

Was soll ich da jetzt machen?
Habe eigentlich alles an was man haben muss

09/23/2013 02:44 passit12#65

Quote:

Originally Posted by Gohunther

Der bot geht bei mir nich mal an es steht im Scarscript

Compiler Hint 15 Variable GRPX1 never used
Compiler Hint 15 Variable GRPY1 never used
Compiler Hint 15 Variable GRPX2 never used
Compiler Hint 15 Variable GRPY2 never used
Compiler Hint 23 Variable FOUNDGROUP never used

Was soll ich da jetzt machen?
Habe eigentlich alles an was man haben muss

That was simply some variables I had left by mistake after removing part of the code, these will be removed in the next upload.
However, they should not cause an issue, and you should still be able to use the bot.

09/23/2013 03:03 Gohunther#66

hm naja wie gesagt ich kann ihn nicht mal anschalten, er geht gleich wieder aus und da steht das dann da... Bitte helfen ^^

09/23/2013 05:15 Nonge_II#67

Ich w�rde mal sagen , das dies der beste bot f�r gro�e und kleine Raid map ist .. sehr gute leistung .. daf�r das er umsonst ist .. bringst du echt schnell ein update .. und ich hoffe das ich dir weiterhin helfen darf .. ich werde diesen Theard bei mir in die Signatur stellen :)

Lg Nonge_II

endglish :

I would say that this is the best bot for large and small raid map is .. very good performance .. ensure that it is free .. bring you an update really fast .. and I hope that I can continue to help you .. I'll put this Theard with me in the signature :)

lg Nonge_II

09/23/2013 05:44 tanq777#68

version RRaidBot_v1.2c worked ... but the new gives me an error.configuration of the sea chart has not been changed ... but the new does not work for mi!

If your SeaChart is NOT at this position, please use manual define.

MiniMap AutoDefined: x1 = 1133, y1 = 94, x2 = 1222, y2 = 183
If your MiniMap is NOT at this position, please use manual define.

RepButton AutoDefined: repx = 863, repy = 705
If your RepButton is NOT at this position, please use manual define.

09/23/2013 05:50 Nonge_II#69

Quote:

Originally Posted by tanq777

version RRaidBot_v1.2c worked ... but the new gives me an error.configuration of the sea chart has not been changed ... but the new does not work for mi!

If your SeaChart is NOT at this position, please use manual define.

MiniMap AutoDefined: x1 = 1133, y1 = 94, x2 = 1222, y2 = 183
If your MiniMap is NOT at this position, please use manual define.

RepButton AutoDefined: repx = 863, repy = 705
If your RepButton is NOT at this position, please use manual define.

Although this is just for me .. but he shoots -

09/23/2013 08:37 passit12#70

Quote:

Originally Posted by tanq777

version RRaidBot_v1.2c worked ... but the new gives me an error.configuration of the sea chart has not been changed ... but the new does not work for mi!

If your SeaChart is NOT at this position, please use manual define.

MiniMap AutoDefined: x1 = 1133, y1 = 94, x2 = 1222, y2 = 183
If your MiniMap is NOT at this position, please use manual define.

RepButton AutoDefined: repx = 863, repy = 705
If your RepButton is NOT at this position, please use manual define.

The only configuration change between v1.2c and 1.2d, is that it requires you to have your group box open and to the side when you start the script.

The messages you have posted that you received are not error messages, they are saying that it has found them locations at them coordinates.

When starting the bot, make sure all these areas are visible. As stated above, make sure you have the group box open, and full rep.

If any of these sections fail to Auto Configure for you, then you can set these up manually.

If your problem is not with the configuration, but something else, then please post exactly what your problem is in detail so I can try to help you.

thanks,
xRiddi

09/23/2013 09:29 tanq777#71

I opened the group and everything is OK.Good job. very good bot. congratulations.: Handsdown:

09/23/2013 10:29 passit12#72

v1.3!

Two fixes, improved the drive to the Behemoth/Ameratasu - this has not been tested as nobody shoots the raids down on my server so they rarely come out.
Removed unused variables to avoid confusion.
Updates, presses log out when the stop time has been reached.
Now toggles opponents when locked on a player so it can shoot the npc.
If you have any other issues please let me know asap in detail.

RRaidBot v1.3 - 23/09/2013 Changelog:

Code:

[list][*]Presses logout when stop time has been reached.[*]Added ToggleOpponent/NextTarget when locked on player[*]Improved the Behemoth/Ameratasu drive (not tested)[*]Removed unused variables[/list]

Known Issues:

Code:

These are being worked on:[LIST][*][/LIST]

Planned:

Code:

[LIST][*]Nothing planned - Post Suggestions.[/LIST]

Notes:
Please make sure you are full rep when starting the bot!
Group box must be open, and positioned to the side when the bot is started!

Thanks,
xRiddi

09/23/2013 11:06 kasanova090787#73

ПОМОГИТЕ МНЕ ПОЖАЛУЙСТА! пишет:

AutoDefineSeaChart:=0; //set to true for autofind seachart, false for manual
AutoDefineMiniMap:=true; //set to true for autofind minimap, false for manual
AutoDefineRepButton:=true; //set to true for autofind repbutton, false for manual

AutoReconnectToRaid:=true; //set to true to join raid after sunk, false to logout
AutoChangeAmmo:=true; //set to true to AutoSwitch to the correct ammo (Needs HollowSlotNumber and EliteSlotNumber set correctly).

ShootBigShip:=true; //set to true if you would like to shoot the big ship, false if you do not.
AutoPowdersAndShields:=true;

09/23/2013 11:39 passit12#74

Quote:

Originally Posted by kasanova090787

ПОМОГИТЕ МНЕ ПОЖАЛУЙСТА! пишет:

AutoDefineSeaChart:=0; //set to true for autofind seachart, false for manual
AutoDefineMiniMap:=true; //set to true for autofind minimap, false for manual
AutoDefineRepButton:=true; //set to true for autofind repbutton, false for manual

AutoReconnectToRaid:=true; //set to true to join raid after sunk, false to logout
AutoChangeAmmo:=true; //set to true to AutoSwitch to the correct ammo (Needs HollowSlotNumber and EliteSlotNumber set correctly).

ShootBigShip:=true; //set to true if you would like to shoot the big ship, false if you do not.
AutoPowdersAndShields:=true;

AutoDefineSeaChart should be set to false, not 0. Like this:

Code:

AutoDefineSeaChart:=false;

You will need to put your own values in lines 70-73, replacing the values of:

Code:

scx1:=0;
scy1:=0
scx2:=800;
scy1:=600;

09/23/2013 11:43 trolleras9#75

no, my friend it isnt working good

:D :D im kidding,it is awesome, i love it but i want to see some more improvements in general performance, btw in 1.2d i was amazed by the fact that it opened powder and plates before big ship, very smart scar bot!
an other suggestion, when a sunburst appears in minimap, bot clicks it and then some times that dissapear, lost in fog,the bot isnt clicking in map to follow it(even if it not visible anymore)i think you understand me

Page 5 of 20

« First

Last »