[Bot] NHC BOT

09/08/2013 23:39 selegato#6571
any tutorial for someone who never used nhc? I'm having a hard time trying to make it work :(
09/08/2013 23:39 mac4lol#6572
where can i find a ready vm with bot? the link in 1st post is down.

[Only registered and activated users can see links. Click Here To Register...]
09/08/2013 23:44 nhcoohrh#6573
I know people are getting mess up during updates and tests.

I recommend this phase to run few vms just to try to understand then start running full vms when you understand how it goes and if it goes fine.


SO GUIDE TO CLEAN AND START A FRESH RUN!

Pre-requisites:
Shared folder must be set up, rooms.ini (fresh/clean) inside the shared folder.
Since you have a shared folder use global config and accmode=2 so you have less work.

I paste here 2 configs, my Global config in shared folder and the local inside the VM.

Note I use z:\BOTS\ as shared folder very important to be easier.

Local config.ini
[Only registered and activated users can see links. Click Here To Register...]
Global config.ini
[Only registered and activated users can see links. Click Here To Register...]

After you got this set:
Start VM1 , run NHC3.exe (make sure you have accs on the accounts.txt at shared folder).
Note: If this vm was running already use "PAUSE" key to kill the bot and clean the counters.

Run the bot, he should create a game and sit inside the game.

Then run other 5 vms (for 3v3), make sure you clean the counters of all this, if all goes fine they will join the game and game start.

Problems: If for some reason they don't join all the same game (go different games) or just don't start. Do it dirty, change configs manually:
You should have Room_1=6 to game start in the rooms.ini.
And each VM should have Roomslot=1 inside the local vm config.ini.
Only 1 of them have Botmaster=1 inside the local vm config.ini

not always i'm good explaining but hope this helps

Quote:
Originally Posted by mac4lol View Post
where can i find a ready vm with bot? the link in 1st post is down.

[Only registered and activated users can see links. Click Here To Register...]
If you buy the bot I can provide a link to a ready vm, but also TrYkeRm4N told me he will upload again a new version when this is running well.
09/09/2013 00:35 Fightling#6574
nhcoohrh thanks for the tutorial but i still have a problem.

the lol client start but the the bot doesnt log in.

my accounts.txt is in my shared folder z:\BOTS

in the config for all bots are these two lines
accsall="Z:\BOTS\accounts.txt"
accmode=2

and in my accounts.txt are the login dates in this format
catechus4:qwert123
cerebellifugal49:qwert123

i can edit the accounts.txt from the vm

thats the error message that appear ind the errorlogs.txt
E2 - grateful8 - 02:09-09/09 - Didn't find Menu Button - 45 sec timeout

evry time i start the bot one account disappear from the shared accounts and appear at the accounts.txt in the vm
after the next start the account in the accounts.txt from the vm will be replaced with a new account from the shared folder

what did I wrong?
09/09/2013 02:26 Grochukg#6575
@up

I have got same problem
09/09/2013 03:21 Likes2bot#6576
Quote:
Originally Posted by Fightling View Post
nhcoohrh thanks for the tutorial but i still have a problem.

the lol client start but the the bot doesnt log in.

my accounts.txt is in my shared folder z:\BOTS

in the config for all bots are these two lines
accsall="Z:\BOTS\accounts.txt"
accmode=2

and in my accounts.txt are the login dates in this format
catechus4:qwert123
cerebellifugal49:qwert123

i can edit the accounts.txt from the vm

thats the error message that appear ind the errorlogs.txt
E2 - grateful8 - 02:09-09/09 - Didn't find Menu Button - 45 sec timeout

evry time i start the bot one account disappear from the shared accounts and appear at the accounts.txt in the vm
after the next start the account in the accounts.txt from the vm will be replaced with a new account from the shared folder

what did I wrong?
I tried for hours to get shared accounts file to work (and this isn't my first time trying). Only two people that do refs can get a shared accounts file to work. Those people are NHC and Trykerm4n as far as I know. I've tried multiple setups, but it either won't get my accounts (same as you mention) or all VMs will try and log into same account (even have the accused and all that jazz setup).

So just go to local Accounts file on each VM. My bots are working, and honestly working well. I'm not quite able to run the same # of VMs I used to. But my machines are still doing well.

My setups are:
4770k w/840 Pro and 32GB Ram - 26 VMs (Two 5v5 and One 3v3)
8350 w/840 Pro and 32GB Ram - 30 VMs (Three 5v5s)

I tried 36 on the 8350 and 30 on the 4770k but the CPU lag caused problems on both. I use XP on my machines; Local Account File, Minigame=1; nextgame=1; staticroom=1;

Hope this helps someone.
09/09/2013 03:55 linglingdreyer#6577
Once this is close to done being updated could somebody make a start to finish for us bot-challenged people?
09/09/2013 04:52 Likes2bot#6578
Bug/Issue:

Some of my machines stop starting games from time to time. If I go into rooms.ini and change it to 10 or 6 (3v3 or 5v5 values) it goes back to working fine. But not sure why it does this. I have staticroom=1 in golbal file and I believe in all the VMs configs too.

Any ideas?
09/09/2013 08:41 cracku84#6579
Hmmm i have same problem, bots dont click start after all team go in to the que
09/09/2013 09:38 nhcoohrh#6580
are you using staticroom=1?

counters should not be changed.
09/09/2013 09:50 cracku84#6581
Quote:
Originally Posted by nhcoohrh View Post
are you using staticroom=1?

counters should not be changed.
[Config]

Room_1=stinging95333
Room_2=NHC2
Room_3=NHC3
Room_4=NHC5
Room_5=NHC5
Room_6=NHC6
Room_7=NHC7
Room_8=NHC8
Room_9=NHC9
Room_10=NHC10


[Counters]
;Don't edit this part

Room_1=1
Room_2=0
Room_3=0
Room_4=0
Room_5=0
Room_6=0
Room_7=0
Room_8=0
Room_9=0
Room_10=0

Status_1=1
Status_2=0
Status_3=0
Status_4=0
Status_5=0
Status_6=0
Status_7=0
Status_8=0
Status_9=0
Status_10=0

i change settings to check pixel method and still bot dont click start game just tay in que after all go in.

i use 3v3 (6) method
09/09/2013 11:43 nhcoohrh#6582
since you have Room_1=1 the game will never start, it must be 6 there.
09/09/2013 12:26 SaDdYy#6583
testing it
09/09/2013 13:02 Sultan Oneida#6584
Quote:
Originally Posted by nhcoohrh View Post
I know people are getting mess up during updates and tests.

I recommend this phase to run few vms just to try to understand then start running full vms when you understand how it goes and if it goes fine.


SO GUIDE TO CLEAN AND START A FRESH RUN!

Pre-requisites:
Shared folder must be set up, rooms.ini (fresh/clean) inside the shared folder.
Since you have a shared folder use global config and accmode=2 so you have less work.

I paste here 2 configs, my Global config in shared folder and the local inside the VM.

Note I use z:\BOTS\ as shared folder very important to be easier.

Local config.ini
[Only registered and activated users can see links. Click Here To Register...]
Global config.ini
[Only registered and activated users can see links. Click Here To Register...]

After you got this set:
Start VM1 , run NHC3.exe (make sure you have accs on the accounts.txt at shared folder).
Note: If this vm was running already use "PAUSE" key to kill the bot and clean the counters.

Run the bot, he should create a game and sit inside the game.

Then run other 5 vms (for 3v3), make sure you clean the counters of all this, if all goes fine they will join the game and game start.

Problems: If for some reason they don't join all the same game (go different games) or just don't start. Do it dirty, change configs manually:
You should have Room_1=6 to game start in the rooms.ini.
And each VM should have Roomslot=1 inside the local vm config.ini.
Only 1 of them have Botmaster=1 inside the local vm config.ini

not always i'm good explaining but hope this helps



If you buy the bot I can provide a link to a ready vm, but also TrYkeRm4N told me he will upload again a new version when this is running well.
Your config.ini is corrupted mate ...
Useless. Are you sure you copied it from you locak vmware?
Check it a bit ...

;Accounts handling mode. 0 use local vm accounts.txt, 1 use file in shared folder (accpath), 2 use accsall method.

nothing under this ...

then

;Use config.ini in shared folder for multiple bots, "Z:\BOTS\config.ini", options that makes nosense like coopID are not used, only global configs like Maxlvl, etc.

nothing ... line deleted ...

Why did you put globalconfig when i cannot see any link between vmware bot and globalconfig ...

Am i right?
edit
got working like yesterday but afk booster is kicking me ... 25% cancer in my body already from this :)
09/09/2013 13:09 Marcelmalakian#6585
The BOT will not run in the background (minimized) anymore?