LIST OF ALL PUBLIC HACKS AND TOOLS

Quote:

Originally Posted by waidas123 #reported non english or german language i think

Quote:

ReportPost Note: This is ONLY to be used to report spam, advertising messages, and problematic (harassment, fighting, or rude) posts.

Quote:

Originally Posted by Freelanceri Has someone made something for the new patch? Atleast it crashes if there's some Launcher.exe included files in the directories.

Quote:

Originally Posted by 6Drako9 The scripts are old (version 4.9.6) but you can update them by reading this post closely NOTE TO NEW HACKERS: you must look around the forum for the current way of bypassing 2Moons' anti-hacking security NOTE TO EVERYONE: The reason why this forum became boring to me is that people waste a lot of time doing nothing... the people that are interested in hacking just re-post stuff that is all over the place. Here is a tip (go into the game and start searching for everything, Character coords, monster coords, clothing values, animation indexes, shop prices, monstr action indexes...the list goes on) ===TOOLS=== [Only registered and activated users can see links. Click Here To Register...]Cheat Engine: A tool that can be used for memory editing and for searching values during the game runtime. [Only registered and activated users can see links. Click Here To Register...]OpenOffice Calc: A tool used for editing the 2Moons data ".csv" files. (the free equivalent of Excel) [Only registered and activated users can see links. Click Here To Register...]OllyDBG v110: Allows you to edit dekaron's memory permanently. (To be used with unpacked_dekaron) [Only registered and activated users can see links. Click Here To Register...]: This has some information that is essential for Wall Hacking with CheatEngine [Only registered and activated users can see links. Click Here To Register...]: Used for unpacking 2Moons' data files (pack.d00, pack.d01...ect) [Only registered and activated users can see links. Click Here To Register...]: Used for bypassing 2Moons' detection of changes made to the data files by Excel [Only registered and activated users can see links. Click Here To Register...]: Bypasses Xigncode's protection (incomplete, still DCs) [Only registered and activated users can see links. Click Here To Register...]: A tool that can be used to train while you are not playing [Only registered and activated users can see links. Click Here To Register...]: A tool that can send clicks to 2Moons (you can write your own bot scripts) [Only registered and activated users can see links. Click Here To Register...]ACTool: Can be used to write simple bot scripts (for example give it a Mousepos and then tell it to Leftclick) [Only registered and activated users can see links. Click Here To Register...]: A tool that can click at the coordinates you tell it to [Only registered and activated users can see links. Click Here To Register...]: A tool used for disabling anything GG does [Only registered and activated users can see links. Click Here To Register...]: For letting OllyDGB read dekaron's encrypted memory. [Only registered and activated users can see links. Click Here To Register...]: A tool used for packet sniffing, for those who want to get into packet editing. (Outdated) ===OTHER=== Instructions for unpacking dekaron.exe: (for versions 4.6.33 and under [Only registered and activated users can see links. Click Here To Register...] Instructions for unpacking dekaron.exe: (for version 4.7.4)(made for Global but I think it also works for 2Moons) [Only registered and activated users can see links. Click Here To Register...] Basic hacking assembly guide: (for those of you who like to understand why you do what you do) [Only registered and activated users can see links. Click Here To Register...] Lenas Reversing for Newbies: (AMAZING video tutorials on Olly and ASM) [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...] (Tuts4You has a downloading limit so download the first 20 tuts above) ===CheatEngine Hacks=== Instructions for attaching CheatEngine to 2Moons:  Spoiler 1. On the CheatEngine main window Click on the [Only registered and activated users can see links. Click Here To Register...] button and the Process List window will open 2. On the Process List window, scroll down and, usualy close to the bottom, you will find dekaron.exe, so double click it. Give thanks to Drako (me) Instructions for adding scripts into CheatEngine:  Spoiler NOTE: you must have CheatEngine attached to 2Moons before starting 1. On the CheatEngine main window Click on the [Only registered and activated users can see links. Click Here To Register...] button to see the Memory Viewer window. 2. On the Memory Viewer window go to Tools/Auto Assemble or (Ctrl+A) to open the Auto assemble window. 3. Copy the script you are going to use and paste it on the Auto assemble window. 4. On the Auto assemble window go to File/Assign to current cheat table. 5. Close the Auto assemble window and the Memory Viewer window. 6. (Un-needed) On the CheatEngine main window double click on Auto assemble cheat to rename your script. 7. To enable your script, click on the check box to the left of your script, where it said Auto assemble cheat. Give thanks to Drako (me) Instructions for changing the values being used by a script:  Spoiler 1. Enable the script you want to use (We will use Speed Hack as the example) 2. On Cheat Engine click on [Only registered and activated users can see links. Click Here To Register...] 3. You will get a window asking for the Address, Description, and Type of the address you want to add. 4. So then fill in the window as follows [Only registered and activated users can see links. Click Here To Register...] 5. After clicking OK, a new address will be added to your cheat table and it will already have a value. 6. So change this value to what you like... 2.5,20,400,34 or anything you can think of. Why Does this work: In CheatEngine's Auto assemble scripts you have probably seen this, "registersymbol(Something)". What this does is make CheatEngine recognize this "Something" as an address like...004599BD (which is the vac address). So you can... add that "Something" to your cheat table, use it in scripts, and even search it in the memory view by typing "Something" in the address search (Ctrl+G). Notice how in the speed script it says "registersymbol(SpeedValue)" Give thanks to Drako (me) Instructions for saving and loading Cheat Tables:  Spoiler After you have added all the scripts you want to your cheat table, now you can save the whole thing in a file. 1. At the top left of the CheatEngine main window click on the [Only registered and activated users can see links. Click Here To Register...] button to open the Save As window. 2. Navigate through your computer's files and folders then when you find a good place, save your CheatTable. 3. The next time you open 2Moons and CheatEngine, you can click on the [Only registered and activated users can see links. Click Here To Register...] to open the Open window. 4. Navigate through your computer's files and folders to find your saved Cheat Table and double click it. Give thanks to Drako (me) Instructions for updating addresses: (NOTE: Everyone must do this for any script to work)  Spoiler NOTE: We will use Speed Hack as an example 1. Fist add the Speed Hack script to your Cheat Table 2. Right click the Speed Hack script and choose Change script to open the Auto assemble window 3. On the Auto assemble window scroll down until you see... "007BFFAA: //D9 40 08 5F 5E C3 8B 0D" The 007BFFAA part is the Speed Hack address The D9 40 08 5F 5E C3 8B 0D part is the ArrayOfBytes of the address. 3. Copy the ArrayOfBytes and move the Auto assemble window to the side. 4. On the search section of the CheatEngine main window change the "Vale type" to Array of Bytes. 5. Paste the ArrayOfBytes you copied on the white box next to "Hex" and click the [Only registered and activated users can see links. Click Here To Register...] button To the left, you will see (ideally) one result. The numbers and letters under the Address column is your new address for the Speed Hack script. 6. Bring back the Auto assemble window and replace the 007BFFAA with the new address you found. 7. Click OK to save the changes to the Speed Hack script. NOTE: On step 5, if you didn't get only one result then you are going to have to try every result one by one until you find the correct one. However if you get either 0 results or too many results then ask for help. Give thanks to Drako (me) Here are more specific Instructions if you couldn't understand my steps [Only registered and activated users can see links. Click Here To Register...] [VacPart1]MonsterProperties: Sets the monster's sight ranges, stand delays, # of following monsters...ect  Spoiler Code: [ENABLE] alloc(MonsterProperties,2048) label(ReturnMonsterProperties) label(PropertyBace) registersymbol(PropertyBace) 0045C2AE: //8B 80 98 00 00 00 89 81 9C 00 jmp MonsterProperties nop ReturnMonsterProperties: MonsterProperties: push eax mov eax,[eax+00000098] //Original Code mov [ecx+0000009C],eax //Original Code pop eax mov [PropertyBace],ecx //mov [ecx+00],00000000 //DwInfoIndex mov [ecx+04],0000004B //DwExploreRange mov [ecx+08],0000004B //DwSight mov [ecx+0C],0000004B //DwPersuitRange //mov [ecx+10],00000000 //DwAvoidRange mov [ecx+14],00000000 //DwExploreStandDelay //mov [ecx+18],00000000 //DwExploreMoveDelay //mov [ecx+1C],00000000 //DwStandDelay mov [ecx+20],000001F4 //DwMoveDelay //mov [ecx+24],00000000 //DwFollowMyMasterRange //mov [ecx+28],00000000 //DwStopMasterNear //mov [ecx+2C],00000000 //DwWarpMyMasterRange //mov [ecx+30],00000000 //DwCallTeamPossibelHP //mov [ecx+34],00000000 //DwCallTeamCount //mov [ecx+38],00000000 //DwBlockNFirstAttack //mov [ecx+3C],00000000 //dwCallTeamCell mov [ecx+40],000000FA //dwFollowTarget mov [ecx+44],00000000 //dwSpecialAttackStartHP mov [ecx+48],00000000 //dwSpecialMeleeAttackRate mov [ecx+4C],00000000 //dwSpecialRangeAttackRate mov [ecx+50],00000000 //DwPowerAttacjStartHP mov [ecx+54],00000000 //dwPowerMeleeAttackProbable mov [ecx+58],00000000 //dwPowerRangeAttackProbable //mov [ecx+5C],00000000 //DwUnderAttackAggro mov [ecx+60],00000000 //DwMeleeAttackRangeInAggro mov [ecx+64],00000000 //DwRangeAttackRangeInAggro mov [ecx+68],000003E8 //DwSightInAggro //mov [ecx+6C],00000000 //DwDefeatAggro //mov [ecx+70],00000000 //DwBlockedAggro //mov [ecx+74],00000000 //DwSlideAggro //mov [ecx+78],00000000 //DwHealAggro //mov [ecx+7C],00000000 //DwMasterUnderAttackAggro //mov [ecx+80],00000000 //DwMasterDefeatAggro //mov [ecx+84],00000000 //DwMasterBlockingAggro //mov [ecx+88],00000000 //DwMasterSlideAggro //mov [ecx+8C],00000000 //DwCOmplusionUnderAttackAggro mov [ecx+90],00000063 //dwMaxSummonsMonsterCount mov [ecx+94],00000000 //dwReSummonsMonsterTick mov [ecx+98],00000000 //dwMaxSummonsMonsterRange mov [ecx+9C],00000000 //dwSummonsStartPcCount //mov [eax+A0],00000000 //PatternType mov eax,[ecx+0000009C] //Original Code jmp ReturnMonsterProperties PropertyBace: db 00 00 00 00 [DISABLE] dealloc(MonsterProperties) unregistersymbol(PropertyBace) 0045C2AE: mov eax,[eax+00000098] [VacPart2]MonsterRange: Sets the Monster's attack ranges to 0 (So monsters wont attack you)  Spoiler Code: [ENABLE] alloc(MonsterRange,1024) label(ReturnMonsterRange) 0053D155: //89 54 24 48 8B 01 FF 50 0C 8B jmp MonsterRange nop ReturnMonsterRange: MonsterRange: mov [esp+48],edx mov [esp+30],00000000 mov [esp+4c],00000000 //mov [esi+00000240],0000000 //other attack range to 0 //mov [esi+0000023c],0000000 //other attack range to 0 //mov [esi+00000238],0000000 //other attack range to 0 mov eax,[ecx] jmp ReturnMonsterRange [DISABLE] dealloc(MonsterRange) 0053D155: mov [esp+48],edx mov eax,[ecx] [VacPart3]MonsterAggro: Sets the Monster's aggro value (It will run towards you as soon as it sees you)  Spoiler Code: [ENABLE] alloc(MonsterAggro,4) registersymbol(MonsterAggro) 0053D16A: //0F B7 86 54 01 00 00 8B 0D mov eax,[MonsterAggro] nop nop MonsterAggro: db 03 00 00 00 [DISABLE] unregistersymbol(MonsterAggro) 0053D16A: movzx eax,word ptr [esi+00000154] [VacAllTogether]: This is just a script with all 3 of the Vac Parts together (nothing special)  Spoiler Code: [ENABLE] alloc(MonsterProperties,2048) label(ReturnMonsterProperties) label(MonsterRange) label(ReturnMonsterRange) label(MonsterAggro) label(PropertyBace) registersymbol(MonsterAggro) registersymbol(PropertyBace) 0045C2AE: //8B 80 98 00 00 00 89 81 9C 00 jmp MonsterProperties nop ReturnMonsterProperties: 0053D155: //89 54 24 48 8B 01 FF 50 0C 8B jmp MonsterRange nop ReturnMonsterRange: 0053D16A: //0F B7 86 54 01 00 00 8B 0D mov eax,[MonsterAggro] nop nop MonsterProperties: push eax mov eax,[eax+00000098] //Original Code mov [ecx+0000009C],eax //Original Code pop eax mov [PropertyBace],ecx //mov [ecx+00],00000000 //DwInfoIndex mov [ecx+04],0000004B //DwExploreRange mov [ecx+08],0000004B //DwSight mov [ecx+0C],0000004B //DwPersuitRange //mov [ecx+10],00000000 //DwAvoidRange mov [ecx+14],00000000 //DwExploreStandDelay //mov [ecx+18],00000000 //DwExploreMoveDelay //mov [ecx+1C],00000000 //DwStandDelay mov [ecx+20],000001F4 //DwMoveDelay //mov [ecx+24],00000000 //DwFollowMyMasterRange //mov [ecx+28],00000000 //DwStopMasterNear //mov [ecx+2C],00000000 //DwWarpMyMasterRange //mov [ecx+30],00000000 //DwCallTeamPossibelHP //mov [ecx+34],00000000 //DwCallTeamCount //mov [ecx+38],00000000 //DwBlockNFirstAttack //mov [ecx+3C],00000000 //dwCallTeamCell mov [ecx+40],000000FA //dwFollowTarget mov [ecx+44],00000000 //dwSpecialAttackStartHP mov [ecx+48],00000000 //dwSpecialMeleeAttackRate mov [ecx+4C],00000000 //dwSpecialRangeAttackRate mov [ecx+50],00000000 //DwPowerAttacjStartHP mov [ecx+54],00000000 //dwPowerMeleeAttackProbable mov [ecx+58],00000000 //dwPowerRangeAttackProbable //mov [ecx+5C],00000000 //DwUnderAttackAggro mov [ecx+60],00000000 //DwMeleeAttackRangeInAggro mov [ecx+64],00000000 //DwRangeAttackRangeInAggro mov [ecx+68],000003E8 //DwSightInAggro //mov [ecx+6C],00000000 //DwDefeatAggro //mov [ecx+70],00000000 //DwBlockedAggro //mov [ecx+74],00000000 //DwSlideAggro //mov [ecx+78],00000000 //DwHealAggro //mov [ecx+7C],00000000 //DwMasterUnderAttackAggro //mov [ecx+80],00000000 //DwMasterDefeatAggro //mov [ecx+84],00000000 //DwMasterBlockingAggro //mov [ecx+88],00000000 //DwMasterSlideAggro //mov [ecx+8C],00000000 //DwCOmplusionUnderAttackAggro mov [ecx+90],00000063 //dwMaxSummonsMonsterCount mov [ecx+94],00000000 //dwReSummonsMonsterTick mov [ecx+98],00000000 //dwMaxSummonsMonsterRange mov [ecx+9C],00000000 //dwSummonsStartPcCount //mov [eax+A0],00000000 //PatternType mov eax,[ecx+0000009C] //Original Code jmp ReturnMonsterProperties MonsterRange: mov [esp+48],edx mov [esp+30],00000000 mov [esp+4c],00000000 //mov [esi+00000240],0000000 //other attack range to 0 //mov [esi+0000023c],0000000 //other attack range to 0 //mov [esi+00000238],0000000 //other attack range to 0 mov eax,[ecx] jmp ReturnMonsterRange MonsterAggro: db 03 00 00 00 PropertyBace: db 00 00 00 00 [DISABLE] dealloc(MonsterProperties) unregistersymbol(MonsterAggro) unregistersymbol(PropertyBace) 0045C2AE: mov eax,[eax+00000098] 0053D155: mov [esp+48],edx mov eax,[ecx] 0053D16A: movzx eax,word ptr [esi+00000154] Mob Speed: This script allows you to change all the Mob's walking as well as running speeds.  Spoiler Notes on Mob Speed:  Spoiler There have been many questions on changing the initial speed of the mob speed hack. These notes are to guide you though this enlightenment. If you have read and understood the "Instructions for changing the values being used by a script" above, this might be easier for you. so.... Point 1. The normal speed of mobs without hacking ranges from 3 to 5, while your own speed is 2.6 (without skills). Point 2. You will need to find the line in the mob speed script that says "db 00 00 20 41" Point 3. Now you need to learn the hex equivalent of the speed values. here I provide the values you should be using: 00 00 00 00 = 0 00 00 80 3F = 1 00 00 00 40 = 2 00 00 40 40 = 3 00 00 80 40 = 4 00 00 A0 40 = 5 00 00 C0 40 = 6 00 00 E0 40 = 7 00 00 00 41 = 8 00 00 10 41 = 9 00 00 20 41 = 10 00 00 30 41 = 11 00 00 40 41 = 12 00 00 50 41 = 13 00 00 60 41 = 14 //any faster than this, and the mobs might start getting lost Point 4. Remember the line in point2? it said "db 00 00 20 41". So guess the initial speed that the Mob Speed script and the Player Speed Script sets. (I'm not gonna tell you cuz I want to to figure it out) Point 5. Now that you are ready to change speeds you should know some ideal values, I worked it out myself and figured out that if your mob speed is 2x your own speed, the monsters wont get lost behind you. This means that, for example setting your own speed to 10 and the mob speed to 20 would be reasonable HOWEVER remember that setting the mob speed too high is not recommended (you can try if you want to know what I mean "00 00 A0 41 = 20") so knowing that, it would be a good idea to set the mob speed to 14 and your own speed to 7 OR the mob speed to 10 and your own speed to 5. I prefer setting my speed to 10 and the mobs to 14. Then I simply stop when the mobs get too far behind me. Making The Change: so just take your newly learn values and replace the old ones in the script with these new ones. Now every time you enable the two scripts the new values will be set and ready Code: [ENABLE] alloc(DrakoMobSpeed,64) label(MobIsWalking) label(ReturnMobSpeed) label(MobRunSpeed) label(MobWalkSpeed) registersymbol(MobRunSpeed) registersymbol(MobWalkSpeed) 0053E190: //80 7C 24 04 00 74 06 D9 40 70 jmp DrakoMobSpeed ReturnMobSpeed: DrakoMobSpeed: cmp byte ptr [esp+04],00 je MobIsWalking fld dword ptr [MobRunSpeed] ret 0004 MobIsWalking: fld dword ptr [MobWalkSpeed] ret 0004 MobRunSpeed: db 00 00 20 41 MobWalkSpeed: db 00 00 40 40 [DISABLE] dealloc(DrakoMobSpeed) unregistersymbol(MobRunSpeed) unregistersymbol(MobWalkSpeed) 0053E190: cmp byte ptr [esp+04],00 Give thanks to Drako (me) WallHack: This hack allows you to walk through walls,hills,water...ect  Spoiler Code: [ENABLE] alloc(Wall,64) label(ReturnWall) 00765A03: //8D BC 24 88 00 00 00 jmp Wall nop nop ReturnWall: Wall: lea edi,ss:[esp+00000088] cmp [eax+00000402],5f626577 je ReturnWall mov [eax+00000402],5f626577 mov [eax+00000406],67616d69 mov [eax+0000040a],616d2e65 mov [eax+0000040e],00000063 jmp ReturnWall [DISABLE] dealloc(Wall) 00765A03: lea edi,ss:[esp+00000088] Give [Only registered and activated users can see links. Click Here To Register...] to bottomy Zoom Hack: As the name suggests, this allows you to zoom as far as you like (untill you can't see yourself)  Spoiler Code: [ENABLE] alloc(DrakoZoom,512) label(ReturnZoom) label(ZoomMax) registersymbol(ZoomMax) 005D2356: //D9 47 04 D9 44 24 28 83 C4 08 jmp DrakoZoom nop nop ReturnZoom: DrakoZoom: push eax mov eax,[ZoomMax] mov [edi+04],eax fld dword ptr [edi+04] fld dword ptr [esp+28] pop eax jmp ReturnZoom ZoomMax: db 00 00 8C 42 [DISABLE] dealloc(DrakoZoom) unregistersymbol(ZoomMax) 005D2356: fld dword ptr [edi+04] fld dword ptr [esp+28] Give thanks to Drako (me) FarEye: Removes the limit to the view distance when using zoom hack  Spoiler Code: [ENABLE] alloc(DrakoClipDistance,64) label(ReturnClip) label(ClipDistance) registersymbol(ClipDistance) 005D3955: //8B 48 08 8B 50 04 51 8B 4C 24 jmp DrakoClipDistance nop ReturnClip: DrakoClipDistance: mov ecx,[ClipDistance] mov [eax+08],ecx mov edx,[eax+04] jmp ReturnClip ClipDistance: db 00 00 48 43 [DISABLE] dealloc(DrakoClipDistance,64) unregistersymbol(ClipDistance) 005D3955: mov ecx,[eax+08] mov edx,[eax+04] Give thanks to Drako (me) Speed Hack: This script allows you to set your own character speed  Spoiler Code: [ENABLE] alloc(DrakoSpeed,16) label(ReturnSpeed) label(SpeedValue) registersymbol(SpeedValue) 007E653A: //D9 40 08 5F 5E C3 8B 0D jmp DrakoSpeed ReturnSpeed: DrakoSpeed: fld dword ptr [SpeedValue] pop edi pop esi jmp ReturnSpeed SpeedValue: db 00 00 20 41 [DISABLE] dealloc(DrakoSpeed) unregistersymbol(SpeedValue) 007E653A: fld dword ptr [eax+08] pop edi pop esi Give thanks to Drako (me) Store Hack: Allows you to open a store in any map (used for extra storage)  Spoiler Code: [ENABLE] 007D7250: //8A 41 08 C3 CC CC CC CC CC CC CC CC CC CC CC CC 8B 0D mov al,01 ret //by Drako [DISABLE] 007D7250: mov al,[ecx+08] Give thanks to Drako (me) Auto Pots: This script sets it so the game thinks that ALL your pots are auto pots  Spoiler Code: [ENABLE] alloc(newmem,1024) label(returnhere) label(originalcode) label(exit) label(check_mana) label(finished_check) 0052D09F: //83 78 08 13 0F 84 jmp newmem nop nop nop nop nop returnhere: newmem: originalcode: cmp dword ptr [eax+08],01 // checking for HP pot? jne check_mana mov dword ptr[eax+08],11 // change to auto pot mov dword ptr[eax+10],11 check_mana: cmp dword ptr [eax+08],02 // checking for MP pot? jne finished_check mov dword ptr[eax+08],12 // change to auto pot mov dword ptr[eax+10],12 finished_check: cmp dword ptr [eax+08],13 je 0052d13a exit: jmp returnhere [DISABLE] dealloc(newmem) 0052D09F: cmp dword ptr [eax+08],13 db 0F 84 91 00 00 00 Give [Only registered and activated users can see links. Click Here To Register...] to noname231 Teleport Hack: Changes the Teleport Location of the map specified to 0,0 as well as the teleport destination.  Spoiler Code: [ENABLE] alloc(TeleHack,1024) label(ChangeTele) label(SkipChange) label(ReturnTele) 00553843: //0F B7 98 04 01 00 00 8B 45 00 jmp TeleHack nop nop ReturnTele: TeleHack: movzx ebx,word ptr [eax] cmp bx,0483 // check for Python Castle -> Tomb of the Black Dragon je ChangeTele cmp bx,4E20 // check for Braiken Castle -> Draco Desert je ChangeTele cmp bx,2B8C // check for North Morte -> Acquirai Ruins je ChangeTele cmp bx,048D // check for tomb of the black dragon -> Cursed Mazed je ChangeTele jmp SkipChange ChangeTele: mov word ptr [eax+00000106],0005 mov word ptr [eax+0000010C],0005 SkipChange: movzx ebx,word ptr [eax+00000104] jmp ReturnTele [DISABLE] dealloc(TeleHack) 00553843: movzx ebx,word ptr [eax+00000104] NOTE: Extra instructions are needed for this script. 1. You MUST activate telehack BEFORE loading the map you want to telehack 2. See on the script how it says "Braiken Castle -> Draco Desert", that means that you have to go to 0:0 on Braiken 3. To go to 0:0 you need to do wall hack Give [Only registered and activated users can see links. Click Here To Register...] to Keith1 GMDetect: If a GM is detected the client will crash (you stay visible in the game for 30 seconds afterwords).  Spoiler Code: [ENABLE] alloc(DetectGM,25) label(ReturnName) 00553763: //C7 46 0C 00 00 00 00 89 47 04 jmp DetectGM nop nop ReturnName: DetectGM: cmp [eax+70],5D4D475B //[GM] je 00000000 mov [esi+0c],00000000 jmp ReturnName [DISABLE] dealloc(DetectGM) 00553763: mov [esi+0c],00000000 Give [Only registered and activated users can see links. Click Here To Register...] to Keith1 Elusive: Teleports you from any position on the map to position 0:0 when enabled.  Spoiler Code: [ENABLE] alloc(newmem,2048) label(returnhere) label(originalcode) label(x_location) label(y_location) label(z_location) registersymbol(x_location) registersymbol(y_location) registersymbol(z_location) label(exit) 005F2FFB: //8B 08 8B 50 04 89 4C 24 20 jmp newmem returnhere: newmem: mov ecx,x_location mov ecx,[ecx] cmp ecx,0 //je originalcode mov [eax],ecx mov ecx,y_location mov ecx,[ecx] cmp ecx,0 //je originalcode mov [eax+04],ecx mov ecx,z_location mov ecx,[ecx] cmp ecx,0 //je originalcode mov [eax+08],ecx originalcode: mov ecx,[eax] mov edx,[eax+04] exit: jmp returnhere x_location: dd 00000000 y_location: dd 00000000 z_location: dd 00000000 [DISABLE] dealloc(newmem) 005F2FFB: mov ecx,[eax] mov edx,[eax+04] Give [Only registered and activated users can see links. Click Here To Register...] to L.e.v.i.a.t.h.a.n Drako Vac(Not Updated): This is a vacume I ran into when trying to create another vacume(so this one is still in an experimental stage) I am releasing it because I want you to know what you think. PM me with the results  Spoiler Code: [ENABLE] alloc(DrakoVac,1024) label(GetCharAddress) label(SkipGetCharAddress) label(ReturnVac) label(ReturnCharAddress) label(CharAddress) label(AddX) label(AddY) registersymbol(CharAddress) registersymbol(AddX) registersymbol(AddY) 005E2823: //89 56 10 8B 48 0C 89 4E 14 8B jmp DrakoVac nop ReturnVac: 005A6D11: //89 0E C1 EA 10 F3 0F 11 46 08 jmp GetCharAddress ReturnCharAddress: DrakoVac: push ebx mov ebx,[CharAddress] fld [ebx+08] fadd [AddX] fstp [esi+0c] fld [ebx+0c] fadd [AddY] fstp [esi+10] pop ebx mov ecx,[eax+0c] jmp ReturnVac GetCharAddress: cmp [CharAddress],00 jne SkipGetCharAddress mov [CharAddress],esi SkipGetCharAddress: mov [esi],ecx shr edx,10 jmp ReturnCharAddress CharAddress: db 00 00 00 00 AddX: db 00 00 00 00 AddY: db 00 00 00 00 [DISABLE] dealloc(DrakoVac) unregistersymbol(CharAddress) unregistersymbol(AddX) unregistersymbol(AddY) 005E2823: mov [esi+10],edx mov ecx,[eax+0c] 005A6D11: mov [esi],ecx shr edx,10 Give thanks to Drako (me) ===Data File Editing (aka csv editing) (aka WinHex hacks)=== Data File Editing Instructions:  Spoiler 1. Download the [Only registered and activated users can see links. Click Here To Register...] and place the contents inside your 2Moons\bin folder 2. (Un-needed) Make a shortcut of the Launcher.exe to your desktop so you can run it easily from the desktop 3. Run the Launcher.exe and after the Dekaron CRC Bypass v2.0 window appears, just click Launch button. 4. The game will open so wait until you get to the server selection and then exit the game 5. Download [Only registered and activated users can see links. Click Here To Register...] and place the Dekaron Data-Unpacker.exe in the 2Moons\data folder 6. Run Dekaron Data-Unpacker.exe and wait a while it extracts all the files that are inside the pack.d0* files 7. When the Dekaron Data-Unpacker is finished there will be a data folder in 2Moons\data 8. There is also a movie folder and a sound folder. Delete them or move them somewhere else. 9. You have to take all the folders in 2Moons\data\data folder and put them in 2Moons\data A. Next you must open the shadow.txt file and edit the number to the right of PackIO from 1 to 0 B. Now it is time to do your edits to the data files for your desired hack  Spoiler This is an example of how the csv files opened in excel SHOULD NOT look like. [Only registered and activated users can see links. Click Here To Register...] This is an example of how the csv files opened in excel SHOULD look like. [Only registered and activated users can see links. Click Here To Register...] To fix it: Open excel, and go to Data/Get External Data/Import Data then open the csv file, click Next, and click the check box next to Comma, then click Next, then Finish C. To run the game you must run the Launcher and, if it is in the bin folder, just click Launch D. If the Launcher.exe is NOT in the bin folder then you must look for dekaron.exe by clicking on the ... button NOTE: After you have edited the ".csv"s and you play the game, the CRCBypass will work only once per log in. To change Sub-servers, you must restart the entire game Give [Only registered and activated users can see links. Click Here To Register...] to Nebular for the CRCBypass Give [Only registered and activated users can see links. Click Here To Register...] to todesengelXx for the Data-Unpacker GodMode (new name: MAD-H, MonsterAttackDissabler-Hack): Makes monster never attempt to attack you NOTE: This CAN be made into a CheatEngine script, just no1 has tried  Spoiler 1. Open: 2Moons\data\share\ai\pattern\positive_attack.csv 2. On column D when you see "MELEE_ATTACK" or "RANGE_ATTACK" change it to "PERSUIT" 3. Open: 2Moons\data\share\creature\monster.csv 4. Go down the rows until you find the monster you want godmode to work on. 5. After you find it go to column AL and put a 1 in that box This will only enable godmode on monsters with AIKey at 1. To enable godmode on all monsters you can either do what you did in this file or do the Vac (Next Hack). Give [Only registered and activated users can see links. Click Here To Register...] to throwawayid 10E6831D Vac: makes all the monsters run towards you when they see you  Spoiler 1. Open: 2Moons\data\share\ai\info.csv 2. On box B2 (DwExploreRange...........for 101=SpiderLarva) change the 4 to 1000 3. On box C2 (DwSight........................for 101=SpiderLarva) change the 13 to 1000 4. On box D2 (DwPersuitRange...........for 101=SpiderLarva) change the 13 to 1000 5. On box F2 (DwExploreStandDelay...for 101=SpiderLarva) change the 2000 to 0 6. On box I2 (DwMoveDelay................for 101=SpiderLarva) change the 1000 to 1 7. On box Q2 (dwFollowTarget............for 101=SpiderLarva) change the 2 to 1000 8. Open: 2Moons\data\share\creature\monster.csv 9. On box AL2 (AIKey...........................for 101=SpiderLarva) change the 2 to 1 This will enable vac only for Spider Larva To enable the vacuum for other monsters, do all the same steps for each row that corresponds to each monster you want to vac. Give [Only registered and activated users can see links. Click Here To Register...] to Mr_Twister Mob Speed: Makes monsters run towards you faster (Useful when vacuuming)  Spoiler 1. Open: 2Moons\data\share\creature\monster.csv 2. On box Z2 change the 2.7 to 10 This will only change mob speed for Spider Larva. To change the mob speed of other monsters you can do the same steps but for the rows corresponding to those monsters. Give [Only registered and activated users can see links. Click Here To Register...] to Mr_Twister WallHack: This edit allows you to walk through walls,hills,water...ect  Spoiler 1. Open: 2Moons\data\share\maplist.csv 2. On box F2 change "braiken.mac" to "web_image.mac" This will enable WallHack in Braiken Castle. To enable WallHack in other maps just go down the rows and do the same steps. Give [Only registered and activated users can see links. Click Here To Register...] to Mastershouter StoreHack: Lets you place items on your personal store on every map for extra storage  Spoiler 1. Open: 2Moons\data\share\maplist.csv 2. On box AF3 change the 0 to 1 This will only enable your personal store on Denebe To enable StorageHack on other maps you must go down the rows and do the same steps Give [Only registered and activated users can see links. Click Here To Register...] to Mastershouter Auto Pots: Lets the game use regular potions as auto potions  Spoiler 1. Open: 2Moons\data\share\item\itemetc.csv 2. On boxes E6 and G6 change the 1 to 17 3. On boxes E7 and G7 change the 2 to 17 This will only enable auto potions only with Health Potions and Mana Potions To enable Auto Pots with other potions you must look for them and do the same steps Give [Only registered and activated users can see links. Click Here To Register...] to Mastershouter Speed Hack: Changes your speed on a certain map  Spoiler 1. Open: 2Moons\data\share\maplist.csv 2. On box AP2 change the 1 to 2 Doing this you have doubled your speed only on Braiken Castle. To go faster you Change the highlighted 1 to 3 for 3x your speed or 4 for 4x your speed and so on... You must do the same in other maps for this to be enabled Give [Only registered and activated users can see links. Click Here To Register...] to Mastershouter Zoom Hack: Changes your Maximum Zoom so that you can zoom as far as you like.  Spoiler 1. Open: 2Moons\data\share\maplist.csv 2. On box I2 change the 18 to 75 This is only for Braiken Castle You must do this for each map you want to do Zoom Hack on Give [Only registered and activated users can see links. Click Here To Register...] to Mastershouter Mass Spawn: Changes the speed that bosses can summon spawns. of Egos that Ivid Laiden summons and how fast it summons them so you can train on the Egos. (can be done for other bosses)  Spoiler 1. Open: 2Moons\data\share\action\monster\reiden.act.2732.c sv (NOTE: there is no space between the c and the s, its the forum's fault) 2. On box G13 change the 2.5 to 0 (will be different 4 different mobs, look for Index 9 on column C) (The following steps are not needed if you use the Cheat Engine [VacPart1] or [VacAllTogether]) 3. Open: 2Moons\data\share\ai\info.csv 4. On box Q368 change the 4 to 1000 (dwFollowTarget column) 5. On box AK368 change the 3 to 190 (dwMaxSummonsMonsterCount column) 6. On box AL368 change the 3000 to 1 (dwMaxSummonsMonsterCount column) Give [Only registered and activated users can see links. Click Here To Register...] to sachamo512 (Reques Beach)Forgery = fogery.act.2025.csv (Reques Beach)Demon Syph = demon_saiph.act.2026.csv (Tomb of the Black Dragon)Oread = oread.act.2280.csv (Treasure of Crespo A)Ivid Laiden = reiden.act.2732.csv ===Trash Can=== CRCbypass IS working for version 4.6.33 just make sure you delete the 2Moons\big\CRC file and that the shadow.txt has PackIO set to 1 (Before beginning to read the instructions for data editing below) [Only registered and activated users can see links. Click Here To Register...] (if you need more specific instructions, with pics) [Only registered and activated users can see links. Click Here To Register...] (if the last link was not enough) Non-Aggro: Makes the Mob not attack you and run past you instead  Spoiler Code: [ENABLE] alloc(NonAggro,1024) label(ReturnAggro) 0053A30A: //0F B7 86 54 01 00 00 8B 0D jmp NonAggro nop nop ReturnAggro: NonAggro: mov byte ptr [esi+00000174],00 // malee attack range = 0 mov byte ptr [esi+00000244],00 // magic attack range = 0 mov [esi+00000240],0000000 //other attack range = 0 mov [esi+0000023c],0000000 //other attack range = 0 mov [esi+00000238],0000000 //other attack range = 0 mov eax,05 mov word ptr [esi+00000154],ax jmp ReturnAggro [DISABLE] dealloc(NonAggro) 0053A30A: movzx eax,word ptr [esi+00000154] Give [Only registered and activated users can see links. Click Here To Register...] to noname231 GMDetect: If a GM is detected your character will be teleported and other hacks disabled  Spoiler Give [Only registered and activated users can see links. Click Here To Register...] to bottomy WallHack: This hack allows you to walk through walls,hills,water...ect  Spoiler NOTE: I will use Loa.mac as an example, also you must NOT be in the map for this to work 1. Download the [Only registered and activated users can see links. Click Here To Register...] and save it anywhere you can access it easily 2. Run 2Moons, CheatEngine and open the MapList 3. Attach CheatEngine to 2Moons 4. On the MapList look for Loa Castle and copy the "6C 6F 61 2E 6D 61 63 00" on that same line 5. Go to CheatEngine and on the search section, change the Value type to Array of Bytes 6. Paste your numbers on the white rectangle next to were it says Hex (yes it should be check-marked) 7. Click First Scan and you should get some results 8. IF the first two addresses start with 03XXXXXX, disregard them, they are not the right ones (so don't touch them) 9. Double click all of your finds to add them to the CheatTable A. Click on the line that just appeared in your CheatTable to highlight it B. Press Enter on your keyboard to open the Value window of the highlighted address C. Go back to the MapList and look at the bottom line D. Copy the "77 65 62 5F 69 6D 61 67 65 2E 6D 61 63 00" (the numbers next to web_image.mac) E. Paste the numbers on the Value window and click the OK button F. Do steps A, B, and E for each address (unless you only found one result, lol) Now Hopefully you can now walk through walls in LoaCastle NOTE: step #4 is the only step that will change with respect to the map you want to wallhack

Quote:

Originally Posted by xabthoj91 i need the skill where it is ?

Quote:

Originally Posted by Constrictor Can I release Shieldhack here? I just try to figure it out and finally found it lol....

Quote:

Originally Posted by cacaseno everthing works perfectly except wall hack :S i dont know why :S i play in dekaron global and i use windows vista are these one of the reasons wall hack doesnt worK? my friend plays in 2moons with windowa XP and his wall hack works fine. when i put the codes for scan i get 3 different codes inseatd of only 1 :S and ive try each one of the codes and nothing :S plz if u know how to fix this problem let me know. plz help ....

Quote:

Originally Posted by ts61fa yea i had the same problem but i choose the 1 that looked the most like the old code so to help ya a hand the new adress= 00766EB3 so it will look like this when u change script> [ENABLE] alloc(Wall,64) label(ReturnWall) 00766EB3: //8D BC 24 88 00 00 00 and the rest of the code but u dont need the change that im new to this game and ive been busy all day to get this working so i know how u feel thats why i wanted to help u ;)