Can anyone upload agBot v1.5.5 to somewhere that is easy to download (Maybe FileFront) instead of RapidShare. ^^
[Free BOT] AgBot(rev6) Releases & Support
03/09/2008 16:53
SilkKillerz#601
03/09/2008 18:57
kamolia#602
i think for the cave issue u should guys try to un mark the option of use hunting area and press start bot right where the bot is and see if it will start attacking mobs or not.
i hope it will
i hope it will
03/09/2008 19:03
Domino369#603
that wont work unless the mobs attack u ^^
03/09/2008 19:26
Nihplod#604
i already uploaded the bot to Filefront, everything is on the wiki. ^^Quote:
Can anyone upload agBot v1.5.5 to somewhere that is easy to download (Maybe FileFront) instead of RapidShare. ^^
03/09/2008 19:38
Frankkko#605
Links updated..
03/09/2008 20:14
blood_omen84#606
Ok... played SRO years ago, being trying to find a good bot ever since, finally found one yay! *does dance* got recommended by a friend, so i thought id give it a try.
Now, before i get told to "learn to read" i have read everything, so i realise this is probably my fault for not being able to get it to work, but if you really want to waste your time telling me that fine. If you can link me to a relavent thread that will explain how to make it work properlly in terms ill understand, then please do.
Ill just explain what iv done, so if you can help me within a few words, you can.
1. Installed SRO and updated using SRO launcher. No problem so far.
2. Downloaded all versions of AgBot and all required dll and ocx files.
3. Installed all ocx and dll files and did the whole cmd thing, so i know that works because im getting no error messages so far.
4. Moved latest version of AgBot into my silkroad folder along with maps folder
5. I then patched the media.pk2 file using the patcher which i ran as administrator ( file > run as > administrator ). This worked fine, patch completed properly
6. Ran nuConnector as admin, again this came up fine ( cmd says "Listening for Bot Connection)
7. Ran AgBot as admin, selected Config1, The window closes and AgBot doesn't load. nuConnector still says "listening for bot connection". I tried starting sro but it now says "server down for maintenance".
8. Checked official website, no servers down for maintenance. Uninstalled everything and then reinstalled legit sro. It works fine, server isn't down.
9. Repeat steps 1-9 until bored and ended up asking for help with the anticipation of being told i can't read or that im a noob.
As you can see, i think iv pretty much done everything i can, i realise iv probably missed out a small bit of information cruicial to everything, but rather than just telling me that, could you actually just tell me what that is and how to fix it? id much appreciate that and itll take you just as much time to flame me, as it will to tell me what iv done wrong and how to fix it... much love and all the rest...
:)
Now, before i get told to "learn to read" i have read everything, so i realise this is probably my fault for not being able to get it to work, but if you really want to waste your time telling me that fine. If you can link me to a relavent thread that will explain how to make it work properlly in terms ill understand, then please do.
Ill just explain what iv done, so if you can help me within a few words, you can.
1. Installed SRO and updated using SRO launcher. No problem so far.
2. Downloaded all versions of AgBot and all required dll and ocx files.
3. Installed all ocx and dll files and did the whole cmd thing, so i know that works because im getting no error messages so far.
4. Moved latest version of AgBot into my silkroad folder along with maps folder
5. I then patched the media.pk2 file using the patcher which i ran as administrator ( file > run as > administrator ). This worked fine, patch completed properly
6. Ran nuConnector as admin, again this came up fine ( cmd says "Listening for Bot Connection)
7. Ran AgBot as admin, selected Config1, The window closes and AgBot doesn't load. nuConnector still says "listening for bot connection". I tried starting sro but it now says "server down for maintenance".
8. Checked official website, no servers down for maintenance. Uninstalled everything and then reinstalled legit sro. It works fine, server isn't down.
9. Repeat steps 1-9 until bored and ended up asking for help with the anticipation of being told i can't read or that im a noob.
As you can see, i think iv pretty much done everything i can, i realise iv probably missed out a small bit of information cruicial to everything, but rather than just telling me that, could you actually just tell me what that is and how to fix it? id much appreciate that and itll take you just as much time to flame me, as it will to tell me what iv done wrong and how to fix it... much love and all the rest...
:)
03/09/2008 20:29
Frankkko#607
yep, you missed one thing, and it's like most of the time in the first post ^^.. agBot Doesn't show up! that's what it's called...
03/09/2008 20:32
Nihplod#608
The maintaince thingie is when u dont have nuconnector running, it is cause sro is trying to find its servers and when they arent responding "they should be under inspection" And when u patch media.pk2 u tell sro to not look after the correct servers, instead u tell sro to connect to your own local computer. And there Nuconnector is waiting for you and redirect the traffic to the real servers.Quote:
Now, before i get told to "learn to read" i have read everything, so i realise this is probably my fault for not being able to get it to work, but if you really want to waste your time telling me that fine. If you can link me to a relavent thread that will explain how to make it work properlly in terms ill understand, then please do.
Ill just explain what iv done, so if you can help me within a few words, you can.
1. Installed SRO and updated using SRO launcher. No problem so far.
2. Downloaded all versions of AgBot and all required dll and ocx files.
3. Installed all ocx and dll files and did the whole cmd thing, so i know that works because im getting no error messages so far.
4. Moved latest version of AgBot into my silkroad folder along with maps folder
5. I then patched the media.pk2 file using the patcher which i ran as administrator ( file > run as > administrator ). This worked fine, patch completed properly
6. Ran nuConnector as admin, again this came up fine ( cmd says "Listening for Bot Connection)
7. Ran AgBot as admin, selected Config1, The window closes and AgBot doesn't load. nuConnector still says "listening for bot connection". I tried starting sro but it now says "server down for maintenance".
8. Checked official website, no servers down for maintenance. Uninstalled everything and then reinstalled legit sro. It works fine, server isn't down.
9. Repeat steps 1-9 until bored and ended up asking for help with the anticipation of being told i can't read or that im a noob.
As you can see, i think iv pretty much done everything i can, i realise iv probably missed out a small bit of information cruicial to everything, but rather than just telling me that, could you actually just tell me what that is and how to fix it? id much appreciate that and itll take you just as much time to flame me, as it will to tell me what iv done wrong and how to fix it... much love and all the rest...
:)
But the problem about the agBot not starting, i have no clue about that. Some friends and people has this problem too, and we tried with updating everything and still no luck. And this is both on vista and xp.
So somewhere there is a bug that we dont know about. -_-
Anyone with a solution?
03/09/2008 21:05
blood_omen84#609
yes, but that doesn't explain why when i open up sro AFTER iv run AgBot, even though AgBot isn't showing up, that SRO just won't work... any explanation for this?Quote:
03/09/2008 21:09
demigod100#610
If your using windows xp then just download the library files on the first page and install them^^Quote:
Now, before i get told to "learn to read" i have read everything, so i realise this is probably my fault for not being able to get it to work, but if you really want to waste your time telling me that fine. If you can link me to a relavent thread that will explain how to make it work properlly in terms ill understand, then please do.
Ill just explain what iv done, so if you can help me within a few words, you can.
1. Installed SRO and updated using SRO launcher. No problem so far.
2. Downloaded all versions of AgBot and all required dll and ocx files.
3. Installed all ocx and dll files and did the whole cmd thing, so i know that works because im getting no error messages so far.
4. Moved latest version of AgBot into my silkroad folder along with maps folder
5. I then patched the media.pk2 file using the patcher which i ran as administrator ( file > run as > administrator ). This worked fine, patch completed properly
6. Ran nuConnector as admin, again this came up fine ( cmd says "Listening for Bot Connection)
7. Ran AgBot as admin, selected Config1, The window closes and AgBot doesn't load. nuConnector still says "listening for bot connection". I tried starting sro but it now says "server down for maintenance".
8. Checked official website, no servers down for maintenance. Uninstalled everything and then reinstalled legit sro. It works fine, server isn't down.
9. Repeat steps 1-9 until bored and ended up asking for help with the anticipation of being told i can't read or that im a noob.
As you can see, i think iv pretty much done everything i can, i realise iv probably missed out a small bit of information cruicial to everything, but rather than just telling me that, could you actually just tell me what that is and how to fix it? id much appreciate that and itll take you just as much time to flame me, as it will to tell me what iv done wrong and how to fix it... much love and all the rest...
:)
The reason why you get the "server is under inspection" message is because you still have the media patcher file loaded onto the SRO file so it needs the NuConnector to start. Solution: if you want to run SRO without bot unpatch mediapatcher file first
03/09/2008 22:30
blood_omen84#611
it's working now, installed different registry thingys, :) will contact agian if i have a problem :D thanks though
03/09/2008 22:44
Domino369#612
I've noticed an odd error, but it might be linked to how resorce hungry the bot is, but when i go on youtube or other video sites, agbot closes after awhile. Again this might be because I have a very old comp and revbot is resource hungry
03/09/2008 23:00
SpriGgy#613
The new Version is really nice.
Again a little bit faster than the 1.5.4.3, really much fewer invalid target.
Especially more than 1 mob attacks you, bot react alot better and he uses SKills now faster too.
Hope it doesnt increased DC or something like that ^^
Again a little bit faster than the 1.5.4.3, really much fewer invalid target.
Especially more than 1 mob attacks you, bot react alot better and he uses SKills now faster too.
Hope it doesnt increased DC or something like that ^^
03/09/2008 23:19
Domino369#614
awesome, that kinda of reply is what i was waiting for b4 upgrading from 1.5.4.3
03/10/2008 00:48
gerakaina#615
What i need to do that bot would start take gold and other stuff? can u axplain me? :)