Archer Bouncing bot

Quote:

Originally Posted by evanxxxm dezinezan@ that means ur client XY coordinate hex value is different than normal clients like us u can follow the steps i provided in post#42 nothing i can fix or do unless u do this yourself because its memory address problems another solution will be reinstall CO, use back a normal CO client

Alright thanks Ill see what happens ;) *cross's fingers :p

Edit: does same deal with [Only registered and activated users can see links. Click Here To Register...] >_<

dezinezan@
i dont think the controlclick scatter bot contents any sort of memory reading
all it does is detect the red color health bar and scatter in that direction
i know some of u are using some sort of modify client, thats why i prefer something standard like the normal CO client

--------
V2 is out, download in the 1st thread
it scatter few more times if the monster is not dead

Quote:

Originally Posted by evanxxxm dezinezan@ i dont think the controlclick scatter bot contents any sort of memory reading all it does is detect the red color health bar and scatter in that direction i know some of u are using some sort of modify client, thats why i prefer something standard like the normal CO client -------- V2 is out, download in the 1st thread it scatter few more times if the monster is not dead

Im not sure exactly about the modify'ed client for all I know I only have Multi-Client... Edited Minimaps... and Edited Itemtype.dat

When I run the program as warrior... It does this [view screen]
But as archer.. it just walks forward again, again, over an over >_<

[Server name Blured / Its using F1 as its set to potions... as if the bot was working.. but on a warrior? Downloaded V.2 ill check if anything changes.]

dezinezan@
first of all, as far as i see from the screenshot
F1 slot is for arrows....
if u put pots, it will right click F1, which means it will try to heal u every 10 seconds or so
secondly, i see the left top corner display correctly
if it shows that XY, that means u are good to go
the program does not detect whether or not u are warrior or archer etc..
so that shouldnt be a problem
what i will suggest is after u press OK in the bot, try clicking some places in CO

Quote:

Originally Posted by evanxxxm dezinezan@ first of all, as far as i see from the screenshot F1 slot is for arrows.... if u put pots, it will right click F1, which means it will try to heal u every 10 seconds or so secondly, i see the left top corner display correctly if it shows that XY, that means u are good to go the program does not detect whether or not u are warrior or archer etc.. so that shouldnt be a problem what i will suggest is after u press OK in the bot, try clicking some places in CO

Only shows that top XY when I load it on warrior... when I load on Archer.. does nothing.. just sits there going up.. was surprizing to me to even see the XY Values on the warrior cause then I had hoped I was getting someplace >_<

V.2: Version 2 seems to do something different... I run it, this is what happens [Didnt test on warrior at all]

[I understand it doesnt detect what class the client is on... but what could it mean if the XY values only show up on warrior when V.1 is running]

dezinezan@
did u try clicking somewhere on the co screen?

Quote:

Originally Posted by evanxxxm dezinezan@ did u try clicking somewhere on the co screen?

V.2 everything stays normal on CO screen, No XY values.. nothing just click ok on program... then Ill walk around scatter manually and 10-15seconds later that error on the screen comes up :confused: I always got such bad luck with everything :(

Thank you for taking the time to try figure out how to get this working. My friend rb 2-3 waters a day... I wanna try to atleast do 1 without getting extremely bored in 1 day Lol.

dezinezan@
hmm, u said when u use ur warrior, it shows the XY on the left top corner, right?
try a DC jump and login ur archer

Quote:

Originally Posted by evanxxxm dezinezan@ hmm, u said when u use ur warrior, it shows the XY on the left top corner, right? try a DC jump and login ur archer

Thanks, that worked!!~ xD

[Edit: Thank You.. AGAIN, for takin the time to help me with this, much appretated!!~]

dezinezan@
....amazing
i still cant really explain why the archer doesnt show but warrior shows
anyways, maybe next CO patch will fix this problem

hey how can i get the hotkey working he doesnt reload arrows automaticly

Awesome for plvling and 120 quest.

mke1234@
if u are using 1024 mode, it should right click F1 slot every 5-10 seconds
which u need to put arrows in that slot

Quote:

Originally Posted by evanxxxm dezinezan@ ....amazing i still cant really explain why the archer doesnt show but warrior shows anyways, maybe next CO patch will fix this problem

Turned speedhack on the warrior with another client ready, once on I turn on the "bounce" jump back an forth to disconnect myself, relog in as my archer... Crtl+Q it, Click ok and it runs... kinda weird :| But that worked, Thanks again & Happy Newyears!~

Edit: V.2 still errors on either char. class... Lol something weird is wrong maybe.

Any ideas for a bot that would work like this one.. but run around single shot hawkings for example? Lvling bow profency?

Shits getting annoying as hell now, now it does the same walking forward crap on the warrior >_< back to not working, Im wondering wtf would or could be wrong. :(

OMG LMAO! WHAT THE HELL!!? I load it, run it on a lvl 83 Water [Plvling] and it shows/runs the XY as it did for the warrior, speed & dc its back to working! Lmao what the hell :confused: This is confusing, annoying and funny at the same time!! :eek:

dezinezan@
ELSE bot works with single shots if u select melee (default mode)


if u are using the latest version, it shouldnt walking forward
do u think the speedhack affects it?