[Guide]How to Create 9.4 Server !

im having a hard time understanding what im suppose to rename and what not if you would be able to assist id greatly appreciate it

Quote:

Originally Posted by steezymo Thank you

were you able to figure this out?

My duplicate comment on the video "# 1 [UPDATE] HOW TO CREATE A RAPPELZ SERVER [9.5.2]" (), to which maybe at least they will answer here:

For about 9 hours I have been trying to install the server, following the tutorial of this video, and the text tutorial on epvp ([Only registered and activated users can see links. Click Here To Register...] server.html) but nothing comes out.

The first problems still started with the attempt to add Telecaster.
I am using Microsoft SQL Server 2012, and when I try to load Telecaster_RevolutionTeam.bak into it, an error just pops up, which says that the file was created in newer versions of the program and cannot be used with Microsoft SQL Server 2012.
Before that, yesterday I was tormented all day with attempts to install Microsoft SQL Server 2014, a lot of errors got out, and either Management Studio did not work, or "Protocols for <SQL Server Title>" was missing in Server Configuration. I cannot install newer versions, since they do not have support for Windows 7.
I downloaded some kind of Telecaster
here: [Only registered and activated users can see links. Click Here To Register...]
and here: [Only registered and activated users can see links. Click Here To Register...]
One of them knocked out a lot of errors at startup, the other also got an error, but one. I no longer had the strength to bother with this, I left it as it is, with one mistake.
I went on.

Replaced all data in .opt files, processed them with the program that came with the kit. It's time to launch PrincessAuroraServer.exe and CaptainHerlockServer.exe. As shown in the video, I got an error that said: "cannot connect log server: ip: 127.0.0.1, port: 4516", just like in the video. Then follows the part where the .bat file is created, and the executable command is entered into it, I copied it, and replaced the port with the one specified in "authserver.opt" - 34390.
What to do with this further is unknown. On the video, after creating this .bat file, the login and password input screen immediately appears. I tried to run the .bat file with PrincessAuroraServer.exe and CaptainHerlockServer.exe already included, tried restarting them, tried to run .bat before starting both servers, there was no sense in this, the error was still there.
Since the video does not show what to do with the .bat file, I thought that it might be enough to run it once and just ignore the error.
I went to run "SFrame.exe", when I start it pops up a window with an error "err code [150]: Game Guard file dows not exist or has been altered" and opens the web page [Only registered and activated users can see links. Click Here To Register...]. I was not sure if it was necessary to launch it, so I also tried to launch Launcher.exe, but there was also some error there.

This was the end of my torment, what to do next - I do not know. Does anyone have any idea?

Well, I would also like to see a single working tutorial.
The video shows some of the steps, and provides a link to the files for the server. When you click on this link, another text tutorial is mentioned there, the actions in which are different from those shown in the video, and some additional files are also provided. Well, the specified text tutorial, in turn, leads to another tutorial, which is not really a tutorial, since nothing is explained there at all ([Only registered and activated users can see links. Click Here To Register...] how-create-9-5-2-server.html).

What to do with all this is unknown.
All this from the outside looks and is perceived as a stream of information, piled up in a heap, which, for good reason, needs to be well ordered and structured.

Thanks for the tutorial and all the information provided. I hope that I can still start the server sooner or later ...

At the server selection stage, writes no connection. What could be the problem?

To help you we need some more information maybe the info from the Auth.opt and GameServer.opt if you have a database password maybe this is wrong, or you don't crypted it

Quote:

Originally Posted by bubsui To help you we need some more information maybe the info from the Auth.opt and GameServer.opt if you have a database password maybe this is wrong, or you don't crypted it

Ok first you can use this Auth Emu then you can start without type commands this makes it easier [Only registered and activated users can see links. Click Here To Register...]

Then just put your encrypted key and change your port or use exist one from the new auth.opt from auth emu ps... make sure this port is the same like in your launcher.bat.
Then if you are local (only your pc offline) change your S:io.ip_address:103.249.70.106 to 127.0.0.1 in your gameserver.opt ps... Make sure you compile your gameserver.opt after change ip.

Then in your database SQL make sure your names like in your gameserver.opt

Then it should work

Quote:

Originally Posted by bubsui Ok first you can use this Auth Emu then you can start without type commands this makes it easier [Only registered and activated users can see links. Click Here To Register...] Then just put your encrypted key and change your port or use exist one from the new auth.opt from auth emu ps... make sure this port is the same like in your launcher.bat. Then if you are local (only your pc offline) change your S:io.ip_address:103.249.70.106 to 127.0.0.1 in your gameserver.opt ps... Make sure you compile your gameserver.opt after change ip. Then in your database SQL make sure your names like in your gameserver.opt Then it should work

Indeed, thank you very much)). How could I have missed it. Now I have a new problem. I started the server, went in. I have a character standing in the field, it's empty around and I can't move:))

i think you have a billing problem the auth emu dont read your Billing and ArcadiaInfo i work whit 9.5 and i have a Telecaster script thats included ArcadiaInfo and BILLING so you dont need to restore them manually : But you can just use [Only registered and activated users can see links. Click Here To Register...] this fixed repack its also 9.4

you can try to rename your BILLING94 and your ArcadiaInfo94 to BILLING and ArcadiaInfo or just restore them agian but whitout 94
or you ignore the auth emu and use instead your old auth folder
put an txt dokument in it whit this

start_service
set game.open_external 1

and name it pre_run_cmd.txt
then you also dont need to type it every launch

why you dont use 9.5 ?

sorry if this is too old n if i was bothering anyone, i just came back to my old created rappelz server and i just remember i had this issue that i cant see any of the following like i can fight them but i cant see them
crystal golem
Starving Slaughter
all monsters in island of the forgotten gods
Would someone please please please help me out here:)
have a wonderful day everyone

Quote:

Originally Posted by frostwolf333 sorry if this is too old n if i was bothering anyone, i just came back to my old created rappelz server and i just remember i had this issue that i cant see any of the following like i can fight them but i cant see them crystal golem Starving Slaughter all monsters in island of the forgotten gods Would someone please please please help me out here:) have a wonderful day everyone

Check if you have your monster resource updated in resource Folder

Fayz, from RappelzPrivateServerTutorial

Quote:

Originally Posted by marshalsadness My duplicate comment on the video "# 1 [UPDATE] HOW TO CREATE A RAPPELZ SERVER [9.5.2]" ([Only registered and activated users can see links. Click Here To Register...]), to which maybe at least they will answer here: For about 9 hours I have been trying to install the server, following the tutorial of this video, and the text tutorial on epvp ([Only registered and activated users can see links. Click Here To Register...] server.html) but nothing comes out. The first problems still started with the attempt to add Telecaster. I am using Microsoft SQL Server 2012, and when I try to load Telecaster_RevolutionTeam.bak into it, an error just pops up, which says that the file was created in newer versions of the program and cannot be used with Microsoft SQL Server 2012. Before that, yesterday I was tormented all day with attempts to install Microsoft SQL Server 2014, a lot of errors got out, and either Management Studio did not work, or "Protocols for <SQL Server Title>" was missing in Server Configuration. I cannot install newer versions, since they do not have support for Windows 7. I downloaded some kind of Telecaster here: [Only registered and activated users can see links. Click Here To Register...] and here: [Only registered and activated users can see links. Click Here To Register...] One of them knocked out a lot of errors at startup, the other also got an error, but one. I no longer had the strength to bother with this, I left it as it is, with one mistake. I went on. Replaced all data in .opt files, processed them with the program that came with the kit. It's time to launch PrincessAuroraServer.exe and CaptainHerlockServer.exe. As shown in the video, I got an error that said: "cannot connect log server: ip: 127.0.0.1, port: 4516", just like in the video. Then follows the part where the .bat file is created, and the executable command is entered into it, I copied it, and replaced the port with the one specified in "authserver.opt" - 34390. What to do with this further is unknown. On the video, after creating this .bat file, the login and password input screen immediately appears. I tried to run the .bat file with PrincessAuroraServer.exe and CaptainHerlockServer.exe already included, tried restarting them, tried to run .bat before starting both servers, there was no sense in this, the error was still there. Since the video does not show what to do with the .bat file, I thought that it might be enough to run it once and just ignore the error. I went to run "SFrame.exe", when I start it pops up a window with an error "err code [150]: Game Guard file dows not exist or has been altered" and opens the web page [Only registered and activated users can see links. Click Here To Register...]. I was not sure if it was necessary to launch it, so I also tried to launch Launcher.exe, but there was also some error there. This was the end of my torment, what to do next - I do not know. Does anyone have any idea? Well, I would also like to see a single working tutorial. The video shows some of the steps, and provides a link to the files for the server. When you click on this link, another text tutorial is mentioned there, the actions in which are different from those shown in the video, and some additional files are also provided. Well, the specified text tutorial, in turn, leads to another tutorial, which is not really a tutorial, since nothing is explained there at all ([Only registered and activated users can see links. Click Here To Register...] how-create-9-5-2-server.html). What to do with all this is unknown. All this from the outside looks and is perceived as a stream of information, piled up in a heap, which, for good reason, needs to be well ordered and structured. Thanks for the tutorial and all the information provided. I hope that I can still start the server sooner or later ...

Contact me on discord i will help you :) Ju99#3995

Quote:

Originally Posted by bubsui i think you have a billing problem the auth emu dont read your Billing and ArcadiaInfo i work whit 9.5 and i have a Telecaster script thats included ArcadiaInfo and BILLING so you dont need to restore them manually : But you can just use [Only registered and activated users can see links. Click Here To Register...] this fixed repack its also 9.4 you can try to rename your BILLING94 and your ArcadiaInfo94 to BILLING and ArcadiaInfo or just restore them agian but whitout 94 or you ignore the auth emu and use instead your old auth folder put an txt dokument in it whit this start_service set game.open_external 1 and name it pre_run_cmd.txt then you also dont need to type it every launch why you dont use 9.5 ?

Billing / ArcadiaInfo are useless, i never used them and never had issue

Billing is BTW made for shop :)

Hello everyone, I apologize for my English.
Help me solve this problem.
Link to the picture here
[Only registered and activated users can see links. Click Here To Register...]

no one will tell you?

Quote:

Originally Posted by papinomoloko no one will tell you?

I cant read it.

Quote:

Originally Posted by ThunderNikk I cant read it.

When installing SQL, it writes this.

"The required file is located on a network resource that is currently unavailable
Click OK to try again, or specify a different path to the folder containing the SQLSYSCLRTYPES.MSI installation package"

If you specify the path yourself, the installation will continue, at the end of the installation there will still be an installation error (

I'm sorry that I didn't immediately translate the error text :(