FlyFF - Awakebot (Customizable, Support your own server)

Quote:

Originally Posted by greyb1t All the solutions above are about increasing delay's due to the low fps / lag spikes, therefore the end result would be a slower bot. Looking at the image it already seems very slow seeing the "Iteration Time". It seems as if you need a better computer. Sorry I can't do anything else to counter the issues you are having.

First I would like to thank you for all your hard work and for answering me!
I realize that the problem is with me (my notebook actually) and I'll try to solve that issue.

So, I kind of got to a solution, I went in an area that no one goes, close to a dungeon far away, got nice 35fps, with a lvl 1 char that can't equip the jewellery. I've used version 1.09 and reached a satisfactory result.

Here's the log of it that I've made it myself:

LOG 1 - report

Goal: minimum of 47 adoch (3x adoch)
Reached: 49 adoch (3x adoch)

Start: 07:21 AM
End : 09:33 AM

Tries: 1819

Total minutes: 60+60+12 = 132min

Awakes per min: 13
Awakes per hour: 826

Number of times "Awake not found": 4

Total number of times ADOCH was

awaked: 380

Number of times it got 45 adoch (3x adoch): 2

08:19 AM
09:16 AM

That will work for almost everything, the exception being the stated fashion, that are event reward and can't be traded.

Quote:

Originally Posted by boblewo First I would like to thank you for all your hard work and for answering me! I realize that the problem is with me (my notebook actually) and I'll try to solve that issue. So, I kind of got to a solution, I went in an area that no one goes, close to a dungeon far away, got nice 35fps, with a lvl 1 char that can't equip the jewellery. I've used version 1.09 and reached a satisfactory result. Here's the log of it that I've made it myself: LOG 1 - report Goal: minimum of 47 adoch (3x adoch) Reached: 49 adoch (3x adoch) Start: 07:21 AM End : 09:33 AM Tries: 1819 Total minutes: 60+60+12 = 132min Awakes per min: 13 Awakes per hour: 826 Number of times "Awake not found": 4 Total number of times ADOCH was awaked: 380 Number of times it got 45 adoch (3x adoch): 2 08:19 AM 09:16 AM That will work for almost everything, the exception being the stated fashion, that are event reward and can't be traded.

Good to see that you've found a solution. How come you are using an old version?

you did an amazing job with this update bro :D, i just downloaded it but it seems that i have some errors here

System.Runtime.InteropServices.ExternalException (0x80004005): A generic error occurred in GDI+.
at System.Drawing.Image.Save(String filename, ImageCodecInfo encoder, EncoderParameters encoderParams)
at System.Drawing.Image.Save(String filename, ImageFormat format)
at System.Drawing.Image.Save(String filename)
at FlyFF_AwakeBot.AwakeningResolver.GetText(Bitmap targetBitmap)
at FlyFF_AwakeBot.AwakeningResolver.GetAwakening(Bitm ap bitmap)
at FlyFF_AwakeBot.AwakeningRoutine.AwakeningLoopThrea d(List`1 preferredAwakeItemList)
i cant find any solotion, can you help me a little with that? :D

Quote:

Originally Posted by colopioplin you did an amazing job with this update bro :D, i just downloaded it but it seems that i have some errors here System.Runtime.InteropServices.ExternalException (0x80004005): A generic error occurred in GDI+. at System.Drawing.Image.Save(String filename, ImageCodecInfo encoder, EncoderParameters encoderParams) at System.Drawing.Image.Save(String filename, ImageFormat format) at System.Drawing.Image.Save(String filename) at FlyFF_AwakeBot.AwakeningResolver.GetText(Bitmap targetBitmap) at FlyFF_AwakeBot.AwakeningResolver.GetAwakening(Bitm ap bitmap) at FlyFF_AwakeBot.AwakeningRoutine.AwakeningLoopThrea d(List`1 preferredAwakeItemList) i cant find any solotion, can you help me a little with that? :D

As seen in the error message, an external error occured in the Image.Save method. Meaning that something has blocked or prevented a bitmap being saved to the path "tesseract\_temp.bmp".

1. When does it occur? Does it happen immediately when you click "Start", or does it happen after a couple of awakes?
2. Have you watched the video of me showcasing the bot? Are you using the bot correctly?
3. On what server does this occur?
4. What operating system do you use?
5. When you downloaded the bot, did you simply extract the whole folder called "greyb1t's Flyff Awakebot 1.34" to a location? You did not modify anything? Nothing removed? Nothing renamed?
6. Please copy and give me the full path for the bot folder.
   Example: C:\Users\username\Desktop\greyb1t's Flyff Awakebot 1.34
7. Try deleting the file "_temp.bmp" inside of the tesseract folder.

Very unlikely, but possibly some other software on your computer is blocking the bot from saving the bitmap. Do you know of anything that might do so on your computer? Try disabling your anti-virus if you have one.

When you have an issue please give as much information in the first post as possible immediately. It eliminates a lot of guesswork for me and saves both of us time. It usually avoids unnecessary posts like these ones.

THANK YOU VERY MUCH FOR YOUR ANSWER, IT HELPED ME TO FIX IT :D
im using your bot since the version 1. on many different servers, and my antivirus never was a problem, till today hahaha thank you very much for your work :)

Quote:

Originally Posted by greyb1t Good to see that you've found a solution. How come you are using an old version?

I've already tested (exhaustively) all its versions haha xD

And for me 1.09 it's the one that I have the least problems/errors, most likely due to my notebook configuration and connection speed.

greyb1t, could I give you just another suggestion for the future?

In the future, would be possible to try to implement a feature where you set up multiple items to be awakened? Like, select the first item to awake (and then you set up the parameters for it). Then you mark "select the second item to be awakened, and then you select his position on your inventory.

The bot will only start another item awake when he has finished the previous one. You could then awake sets of armour, jewellery and so on, all at once.

Quote:

Originally Posted by boblewo I've already tested (exhaustively) all its versions haha xD And for me 1.09 it's the one that I have the least problems/errors, most likely due to my notebook configuration and connection speed. greyb1t, could I give you just another suggestion for the future? In the future, would be possible to try to implement a feature where you set up multiple items to be awakened? Like, select the first item to awake (and then you set up the parameters for it). Then you mark "select the second item to be awakened, and then you select his position on your inventory. The bot will only start another item awake when he has finished the previous one. You could then awake sets of armour, jewellery and so on, all at once.

I appreciate the suggestion, but I will probably not implement it. I only came on here to fix the current issues with the bot and update to fix them. Then I wait for feedback for the new version to fix the new bugs, then I am out of here.

[Only registered and activated users can see links. Click Here To Register...]

What if there are 2 colors on Awake Text?
Blue for Text
Green for Number

Quote:

Originally Posted by moritcho6 [Only registered and activated users can see links. Click Here To Register...] What if there are 2 colors on Awake Text? Blue for Text Green for Number

This was written on my todo list for version 1.34 among with a couple of other features to fix the bot for servers that have prevented it from working.

Unfortunately I decided to skip them due to becoming bored of adding more features lol. I will not bother releasing a new update with the sole reason for a new feature. As I have said earlier, I will stay for a while and update if a bad bug is reported. Otherwise I am outta here.

If you have programming knowledge, or know someone who does, the fix it extremely easy. You can simply modify [Only registered and activated users can see links. Click Here To Register...] and hard code the values without the need to recompile using dnSpy.

Good luck :)

Quote:

[13:33:26] Bot has started [13:33:26] System.InvalidOperationException: Cannot process request because the process (11788) has exited. at System.Diagnostics.ProcessManager.OpenProcess(Int3 2 processId, Int32 access, Boolean throwIfExited) at System.Diagnostics.Process.GetProcessHandle(Int32 access, Boolean throwIfExited) at System.Diagnostics.Process.OpenProcessHandle(Int32 access) at System.Diagnostics.Process.get_Handle() at FlyFF_AwakeBot.AwakeningRoutine.AwakeningLoopThrea d(List`1 preferredAwakeItemList)

Hello i tried to use the bot on insanity flyff but for some reason i am having this problem , care to take a look?

Quote:

Originally Posted by mental2 Hello i tried to use the bot on insanity flyff but for some reason i am having this problem , care to take a look?

It seems to complain that the Insanity Flyff client is not found, meaning it is possibly blocked or closed down. I suppose it does not, because why would it?

Therefore:

• Try disabling your anti-virus if you have one.
• If you have any other software that might act as a protection from virus/malware, disable that as well.

If any of the above does not work, I cannot provide any other solution. Sorry.

Hello what should I do if the awake description has 2 lines in it
for example

Additional Damage of Critical
Hits +28%

the bot cant seem to read it

Quote:

Originally Posted by andrewoiid Hello what should I do if the awake description has 2 lines in it for example Additional Damage of Critical Hits +28% the bot cant seem to read it

A solution for this issue has already been given in the thread in [Only registered and activated users can see links. Click Here To Register...].

The bot tells you what it reads from the game after the text: "Raw awake In-game text:". Look what the bot reads and understands as the awake and use that value for the gametext in the config.

The awakebot tell you through the log what it reads when attempting to read the awake as shown in the image below.

[Only registered and activated users can see links. Click Here To Register...]

hello,

I have this box message :
error
"Unable to start because tesseract is not found"

however Tesseract is well installed :
when I run it directly from the directory where the AwakBot is installed :

FlyFF AwakeBot>tesseract -v
tesseract v4.0.0.20181030
leptonica-1.75.3
libgif 5.1.4 : libjpeg 8d (libjpeg-turbo 1.5.3) : libpng 1.6.34 : libtiff 4.0.9 : zlib 1.2.11 : libwebp 0.6.1 : libopenjp2 2.2.0


do you have some idea to solve this issue ?

thanks !

Hi can I have a code for a multiple color for awake window like this one [Only registered and activated users can see links. Click Here To Register...].

or maybe can i have the RGB for vintage flyff, here is the sample image of the awake text.