►►► PokémonGO Full-BOT SetUp | Video Guide [UPDATED] ◄◄◄

Quote:

Originally Posted by iSl3nd3r Check this;  Spoiler This tutorial is for the latest NecroBot CLI version You don't need Visual Studio for this one! NOTEPAD++ is suggested to edit config files! [Only registered and activated users can see links. Click Here To Register...] Installation & Configuration • Download the latest release Release.zip. • Unzip the downloaded files, run PoGo.NecroBot.CLI.exe for a few seconds, close it, and edit .\Config\auth.json - You NEED to run the .exe first, otherwise .\Configs\ folder does NOT get created and you can't edit the configuration. • Edit AuthType to be "0" for Google, "1" for Ptc • Edit your password and username when choosing PTC login (!Pay attention that password is first then username!) • Edit .\Config\config.json with your desired settings • Edit the DefaultLatitude and DefaultLongitude which can be found here to fit your desired location. (These go with DOTS, as in 54.000 20.000 - if you use COMMAS, it wont work!) • If you've selected Ptc, enter the Username and Password of the Ptc Account. If you use Google, you don't need to input anything in username/password fields. When you start the bot, you'll get a new tab in Chrome/Firefox where it asks you to login with the Google account you have linked the Pokemon Go account with. Login and enter the code. YOU GET THE CODE AUTOMATICALLY COPIED IN YOUR CLIPBOARD, SO JUST CTRL+V. Accept, accept, and you're in. No token needed in the configuration files, the bot does this by itself. • Edit the other available settings to your desire. • Run the PoGo.NecroBot.CLI.exe • Profit. Now let's go into detail on the configuration file (.\Configs\Settings.ini): "AuthType": google, -> google = Google, ptc = Ptc. If 1, you need to input the username and password below "PtcUsername": "username2", Do NOT input these if you are using Google. "PtcPassword": "pw", Do NOT input these if you are using Google. "DefaultLatitude": 52.37021577, Use dots as a separation character, not commas. "DefaultLongitude": 4.895167899999933, Use dots as a separation character, not commas. "DefaultAltitude": 10.0, Leave this as is. "KeepMinIvPercentage": 90.0, IV % perfection. Google this if you don't know what it is. I suggest you leave it as default unless you know what you're doing. "KeepMinCp": 1000, It wont transfer (even if duplicate) pokemons below X CP (in this case, 1000). "WalkingSpeedInKilometerPerHour": 50.0, You can fiddle with this if you want. "EvolveAllPokemonWithEnoughCandy": false, False = no, True = yes "KeepPokemonsThatCanEvolve": false, False = no, True = yes "TransferDuplicatePokemon": true, False = no, True = yes. I suggest "true", otherwise your pokemon inventory will get full and the bot wont be able to catch anymore pokemon. "DelayBetweenPokemonCatch": 5000, Delay in ms (1000 ms = 1 second). Leave as is unless you know what you're doing. "UsePokemonToNotCatchFilter": false, False = no, True = yes. I wont explain how this works, if you want go find yourself. "KeepMinDuplicatePokemon": 1, I suggest you leave at least 1 of each. "PrioritizeIvOverCp": false, Again, google what IV % is if you want to know. "MaxTravelDistanceInMeters": 1000, Radius the bot will walk around. This is in meters, so 1000 meters = 1km radius. Change if you want. "GpxFile": "GPXFile.GPX", Do not touch. I wont explain what this does, find out for yourself. "UseGpxPathing": false, Do not touch. I wont explain what this does, find out for yourself. "UseLuckyEggsWhileEvolving": false, This will make the bot use lucky eggs if there's stuff to evolve. Do what you want. "EvolveAllPokemonAboveIv": false, Again, google what IV % is if you want to know. "EvolveAboveIvValue": 90.0 Again, google what IV % is if you want to know.

Quote:

Originally Posted by PeterPan2454 Amazing! i ll try out! wow

Quote:

Originally Posted by iSl3nd3r Have fun! New video will be uploaded tonight :)

Quote:

Originally Posted by PeterPan2454 Its possible to implement a individual GPS Path ? If yes, maybe you can give me a short hint? I cant find much Information [IMG=expandable: 1][Only registered and activated users can see links. Click Here To Register...][/IMG] any help? farming 1-3 pokemon - then looting failed

Quote:

Originally Posted by Wurstbnbon Not working anymore. He not logging in into Ptc. I downloaded the newest version but all the time PokemonGo.RocketAPI (fail loading) the other 2 folders loaded succsessfully. I tried it more than 10 times .. redownload, change the folder etc. but still not working. It says fail loading or the folder moved away and is unobtainable.

Quote:

Originally Posted by iSl3nd3r It is working sir, the latest version is pre-compiled so you don't need Visual Studio, just use it like this as previously mentioned; Check this;  Spoiler This tutorial is for the latest NecroBot CLI version You don't need Visual Studio for this one! NOTEPAD++ is suggested to edit config files! [Only registered and activated users can see links. Click Here To Register...] Installation & Configuration • Download the latest release Release.zip. • Unzip the downloaded files, run PoGo.NecroBot.CLI.exe for a few seconds, close it, and edit .\Config\auth.json - You NEED to run the .exe first, otherwise .\Configs\ folder does NOT get created and you can't edit the configuration. • Edit AuthType to be "0" for Google, "1" for Ptc • Edit your password and username when choosing PTC login (!Pay attention that password is first then username!) • Edit .\Config\config.json with your desired settings • Edit the DefaultLatitude and DefaultLongitude which can be found here to fit your desired location. (These go with DOTS, as in 54.000 20.000 - if you use COMMAS, it wont work!) • If you've selected Ptc, enter the Username and Password of the Ptc Account. If you use Google, you don't need to input anything in username/password fields. When you start the bot, you'll get a new tab in Chrome/Firefox where it asks you to login with the Google account you have linked the Pokemon Go account with. Login and enter the code. YOU GET THE CODE AUTOMATICALLY COPIED IN YOUR CLIPBOARD, SO JUST CTRL+V. Accept, accept, and you're in. No token needed in the configuration files, the bot does this by itself. • Edit the other available settings to your desire. • Run the PoGo.NecroBot.CLI.exe • Profit. Now let's go into detail on the configuration file (.\Configs\Settings.ini): "AuthType": google, -> google = Google, ptc = Ptc. If 1, you need to input the username and password below "PtcUsername": "username2", Do NOT input these if you are using Google. "PtcPassword": "pw", Do NOT input these if you are using Google. "DefaultLatitude": 52.37021577, Use dots as a separation character, not commas. "DefaultLongitude": 4.895167899999933, Use dots as a separation character, not commas. "DefaultAltitude": 10.0, Leave this as is. "KeepMinIvPercentage": 90.0, IV % perfection. Google this if you don't know what it is. I suggest you leave it as default unless you know what you're doing. "KeepMinCp": 1000, It wont transfer (even if duplicate) pokemons below X CP (in this case, 1000). "WalkingSpeedInKilometerPerHour": 50.0, You can fiddle with this if you want. "EvolveAllPokemonWithEnoughCandy": false, False = no, True = yes "KeepPokemonsThatCanEvolve": false, False = no, True = yes "TransferDuplicatePokemon": true, False = no, True = yes. I suggest "true", otherwise your pokemon inventory will get full and the bot wont be able to catch anymore pokemon. "DelayBetweenPokemonCatch": 5000, Delay in ms (1000 ms = 1 second). Leave as is unless you know what you're doing. "UsePokemonToNotCatchFilter": false, False = no, True = yes. I wont explain how this works, if you want go find yourself. "KeepMinDuplicatePokemon": 1, I suggest you leave at least 1 of each. "PrioritizeIvOverCp": false, Again, google what IV % is if you want to know. "MaxTravelDistanceInMeters": 1000, Radius the bot will walk around. This is in meters, so 1000 meters = 1km radius. Change if you want. "GpxFile": "GPXFile.GPX", Do not touch. I wont explain what this does, find out for yourself. "UseGpxPathing": false, Do not touch. I wont explain what this does, find out for yourself. "UseLuckyEggsWhileEvolving": false, This will make the bot use lucky eggs if there's stuff to evolve. Do what you want. "EvolveAllPokemonAboveIv": false, Again, google what IV % is if you want to know. "EvolveAboveIvValue": 90.0 Again, google what IV % is if you want to know. If you still wanna use the version which I used on the video I've put the master version used on the video :)

Quote:

Originally Posted by Wurstbnbon Sir, there is no .exe file in the folders. Am I wrong with that downloadlink? [Only registered and activated users can see links. Click Here To Register...] I can't find an exe there. I'm very confused now and have no idea to fix it. :D I deleted Visual Studio and downloaded Notepad++ to use the new version. __________________ fixed!

Quote:

Originally Posted by isoactive is there a way to get rid of the key press to make the bot start? its working quite fine but im still getting exceptions which make the bot crash and when im afk it doesnt continue since i have to press a key... edit: found it - its "StartupWelcomeDelay" but when i set it to false the bot crashes... somehow very many crashes atm

Quote:

Originally Posted by iSl3nd3r Video updated, stable version!

Quote:

Originally Posted by animedub Firstly awesome work there mate superb bot!! there a slight problem i use ptc working fine. But at around like 30 mins after the bot is working absolutely perfect after 30 mins its just stops like the cursor keeps blinking it doesn't close or anything it just doesn't do anything just stops farming/(and other stuffs). Would be great if ya could help me thanks :)

Quote:

Originally Posted by PeterPan2454 perfect version. this reminds me over 10 Years ago, when i played Lineage 2 and a botting like in past is here too. Hopy you enjoy to improve your experience with this ! @ iSl3nd3r: Option to use Incense is still a problem to implement? :O @ all im experiementing with Sniper Function just to catch weedle pidgey to maximize EXP/H, anyone experience jet?

Quote:

Originally Posted by animedub Firstly awesome work there mate superb bot!! there a slight problem i use ptc working fine. But at around like 30 mins after the bot is working absolutely perfect after 30 mins its just stops like the cursor keeps blinking it doesn't close or anything it just doesn't do anything just stops farming/(and other stuffs). Would be great if ya could help me thanks :)

Quote:

Originally Posted by PeterPan2454 EDIT: maybe the developer can tell us how to use the old google token. Some of us still have one working.

Quote:

Originally Posted by iSl3nd3r The features are limited on config.json file, check it out and If its not available you're ideas are always welcome on Discord channel. This issue is fixed on 0.3.3, but If you don't want to change your version do this; For all of you that want a solution to the 30 minute problem... Here it is. In your config.json, change the following values: { "AutoUpdate": false, "StartupWelcomeDelay": false } In the folder that contains NecroBot.exe, create a file called run.bat and paste in the following: @[Only registered and activated users can see links. Click Here To Register...] off :loop start NecroBot.exe timeout /t 1800 >null taskkill /f /im NecroBot.exe >null timeout /t 5 >null goto loop This will create a loop that runs your bot for 30 minutes and then kills it for 2 minutes and runs it again. Why two minutes?! Because you don't really want to get banned for teleporting back to your starting location. Watch the latest bot video shown in the main thread and configure as shown, API system has changed since that was causing a lot of issues.