[Help Thread] Please post your questions here.

11/14/2014 18:32 ThunderNikk#3931
@Azreil

Sounds like you just need to resource the arcadia.dbo.SkillResource into an RDB for the client.

If your skill tree is correct then you probably do not need the dbo.SkillTreeResource

The issue with the db_skill.rdb is it contains two tables, the dbo.SkillResource and dbo.SkillJPResource into one RDB

glandu2s RDB tool can work with it but you need to do some manual changes to the database to get it to work all explained on page 2 and page 3 of his thread.

It would almost be easier to tell you to get the db_skill.rdb from the resources that come with Royals repack by searching his resources for the hash name.
11/14/2014 19:46 Taktiik#3932
Hi , I have a problem when we buff you do not see the effect, for example blessing of vitality you can not see the effect around the player . Where this would come ? Thank you ! Sorry for my bad english, I am french .
Thank you .
[ DEV] Gamerz
11/15/2014 05:42 Azreil#3933
Quote:
Originally Posted by thndr View Post
@Azreil

Sounds like you just need to resource the arcadia.dbo.SkillResource into an RDB for the client.

If your skill tree is correct then you probably do not need the dbo.SkillTreeResource

The issue with the db_skill.rdb is it contains two tables, the dbo.SkillResource and dbo.SkillJPResource into one RDB

glandu2s RDB tool can work with it but you need to do some manual changes to the database to get it to work all explained on page 2 and page 3 of his thread.

It would almost be easier to tell you to get the db_skill.rdb from the resources that come with Royals repack by searching his resources for the hash name.
db_skill.rdb = LfEN^kX& 0ndYT when it is hashed....I tried your suggestion about getting this from Royals repack ....it did not work. The soul taming skill was click-able , it was lit up , you can use the skill on a target....there was the taming animation shown ......but target was not tamed and soul taming card was not used. had 30 ...tried skill....no fail message....no tame message.....still had 30 cards. I think my head will explode now -.-

If someone could take a look into the server , with this db and this client and see if there is a way to get the soul taming skill working again....It sure would mean a lot. As I mentioned earlier...this db with this client has boss pets to summon. Black widow...medusa...all those can be summoned.....their cards have the correct picture.....no empty strings..
but the soul skill is broken.....(and regular taming skill works at 100%)
Please someone if you have time....please take a look?

[Only registered and activated users can see links. Click Here To Register...]
11/15/2014 16:17 ThunderNikk#3934
Are you sure you did not replace your dbo.monsterresource in the database.

Check the script_on_dead column in your monster resource for the new_taming_system entries.

I did something once that broke it and somehow made the taming skill level to 10, which changes the state level and would not tame based on the fact that state level was never 2.

If you have given your character level 10 soul tame skill, just correcting whether or not you can level it will not correct that character. You will need to edit the characters skill level in the telecaster database.

Check to make sure your character is getting the correct state level.

You do know you still have to kill the mob for the tame right?

Some of these things would not change with just a client change.
11/15/2014 17:19 Anothers#3935
the character doesn't look the name correctly and does not work properly db_ item.rdb still throw the same error items
[Only registered and activated users can see links. Click Here To Register...]
11/15/2014 19:12 ThunderNikk#3936
Looks like you are trying to use a 9.1 client.

The server files are 8.1
11/15/2014 21:16 Azreil#3937
Quote:
Originally Posted by thndr View Post
Are you sure you did not replace your dbo.monsterresource in the database.

Check the script_on_dead column in your monster resource for the new_taming_system entries.

I did something once that broke it and somehow made the taming skill level to 10, which changes the state level and would not tame based on the fact that state level was never 2.

If you have given your character level 10 soul tame skill, just correcting whether or not you can level it will not correct that character. You will need to edit the characters skill level in the telecaster database.

Check to make sure your character is getting the correct state level.

You do know you still have to kill the mob for the tame right?

Some of these things would not change with just a client change.
Thank you for your responses Sir...I am truly grateful. I am 1000% sure monsterresource has not been changed. The only change I made was to grab arcadia.dbo.skillResource from royal repack.
Yes Sir, I am fully aware of killing the mob .
I made a new character and tried at various level of soul taming....the skill levels normally......just refuses to actually work now. -.-
11/15/2014 21:55 ThunderNikk#3938
Can you please check the skill in your database for the correct state?

It is skill 48400

It should add state 48400

At a level of 2

When you are buffed with state 48400 at level 2 and you kill a mob it should trigger the new_taming_system .lua

Please also take a look at the new taming system .lua and see that it is not modified at all.
11/16/2014 16:25 Azreil#3939
Quote:
Originally Posted by thndr View Post
Can you please check the skill in your database for the correct state?

It is skill 48400

It should add state 48400

At a level of 2

When you are buffed with state 48400 at level 2 and you kill a mob it should trigger the new_taming_system .lua

Please also take a look at the new taming system .lua and see that it is not modified at all.

Thank you again so much for trying to help......
is that located in Arcadia SkillResource
SkillState
or in Telecaster in db.Character ?

I keep making it worse I think. -.-
Now...the skill activates...but the animation says "perfect" and it misses the target. (and yes I have e-cards and yes it is soul-tamable mobs) It's not like I havent tried....I just really think I am making it worse ..
11/16/2014 23:03 ThunderNikk#3940
Entry in arcadia.dbo.SkillResource...

Code:
48400	50048400	1	40048400	1	0	1	0	0	0	0	0	0	0	0	0	0	0	0	170	20	-16	0.00	0.00	0.00	0.00	0	0	0.00	0.00	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	1	3.00	0.00	0.00	0.00	0.00	0.00	0.00	0	1	0	0	0	0	0	1	1	1	0	1	301	0	48400	0	2.00	0.00	120.00	5.00	3.00	100	0	100	0	0	0.00	0	0.00	0.00	0	0	0.000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	0.0000	1522	icon_skill_soul_tame	0	0.00	0.00
Entry in arcadia.dbo.StateResource...

Code:
48400	30048400	60048400	0	1	0	0	0	0	1	0	0	0	0	0	0	0.000	0.000	0	0	0	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	0.000	20023	icon_skill_soul_tame_condition	7059	3	0	0	0	0	0	0	0	0	0	0	0
It is a self target, I have no idea where you are going wrong anymore after just changing the client, but my guess is your resources for these are no longer correct.

You say you have not changed anything in the database. So it must be a resource.

db_skill.rdb or db.state.rdb
11/17/2014 21:46 Taktiik#3941
Hi , I have a problem when we buff you do not see the effect, for example blessing of vitality you can not see the effect around the player . Where this would come ? Thank you ! Sorry for my bad english, I am french .
Thank you .
[ DEV] Gamerz

Resolve pls?
11/17/2014 23:46 ThunderNikk#3942
If I had to guess I would look into Arcadia.dbo.EffectResource or Arcadia.dbo.ModelEffectResource

But I am not really sure.

[NOTADEV]thndr
11/18/2014 17:10 Taktiik#3943
Hello thank you for your response, I had already thought of, but nothing happens, I'm changing the effects of rdb, its does not change, I'll réesayer anyway, thank you for your quick response
11/19/2014 18:08 rRINDVIEH#3944
- I get some error messages by using that royal account manager!

- I still can't log in to the game!

- Whenever I try to log in it says "Cannot connect to the patch server"

- I'm getting very confused with all the ports >_<

- In the p-server tutorial it was said I have to use this for the auth.opt file =


but in the epic 5.2 server files the auth.opt file looked like this =


the gameserver.opt file in the tutorial was supposed to be this =


but in the 5.2 server files the gameserver.opt file looked like this =


its very strange and confused o.O

thats the .bat launcher code in the tutorial =


- PrincessAuroraServer :


- CaptainHerlockServer :


- SQL Auth Account :


- SQL Server Configuration Manager :


- Rappelz Log In Error Message :


- Royal Account Manager :


- I'm using the 5.2 Zesua Client!
- I did each step what was said in the tutorial, but I still can't log in!
- I cant find the answer of this problem!

Just for an example :

If I replace the codes in auth.opt and gameserver.opt file with the codes which was given in the tutorial then it shows me this


It also happened to me when i changed "4502" to "8841" o.O strange

Quote:
Originally Posted by 8ballx View Post
SQL Server Configuration Manager

TCP Dynamic Ports (leave blank)
TCP-Port 1443

try that
I tried this but it still shows me the message "Cannot connect to the patch server"
11/19/2014 20:49 ThunderNikk#3945
It is perfectly fine to ask your question in one place.

I am not responding 3 different times.