Autoit bot(Craft/Fish) - Simple bot

Strange bug, hasty hands not working with newer versions of the bot. After using hasty hands, the bot fails to press finish synthesis and once the timer runs out, the bot stalls in the synthesis menu. Older versions work just fine. All other skills/standard synth can be completed without any issues.

Personally for me, hasty hand has never worked in older bots. It always stalls out at the finish window then does nothing. I wasn't actually aware the bot could do hasty hand. The same thing happens if you use any of the progression abilities that move the synth forward 30%, if they complete the synth the bot hangs and does nothing even after the finish timer runs out.

Quick Bugs:
-Version G's GUI buttons tend to stick or not respond properly, it's an intermittent problem and not very serious.
-Sometimes the bot will not use bold/rapid when you set it to do it, closing the bot and opening it fixes this.

That's all I've run into so far, I also found that if you shorten the synth sleep timers there seems to be less liklihood overall that the shift keys will get stuck, it still happens somewhat frequently but it seems less severe than when the timers are at the default. Anyways, keep up the good work, the bot works wonderfully regardless of these minor issues!

Which servers are you guys from?

I just finished getting my custom key press implementation done, can't say I recommend doing so to anyone else...

Just had the most extreme lock-up yet. The program seemed to be holding down some key that I'm not familiar with, it may have been control. I was trying to type in word and the keys would only register upon the taskbar for word. And in firefox when I tried to click a link, it instead downloaded the link instead of directing me.

Pressing any of the keys again to clear it did not work. The bot itself refused to force close or even pause. I have all the keys for default and DEL nor END worked. I was also entirely unable to go to start menu and start up taskmgr from the run command because I was unable to type anything in for some reason. Clicking to close out the bot did nothing, same with right clicking the icon in the taskbar in windows and selecting close.

What did work was using my controller to override the bot's slower actions and make myself log out. Once that happened the bot realized it couldn't do anything, and then went to idle/deactivate. After that I could type and everything was normal.

If it helps, I'm currently using version G.

Quote:

Originally Posted by ovusian Personally for me, hasty hand has never worked in older bots. It always stalls out at the finish window then does nothing. I wasn't actually aware the bot could do hasty hand. The same thing happens if you use any of the progression abilities that move the synth forward 30%, if they complete the synth the bot hangs and does nothing even after the finish timer runs out. Quick Bugs: -Version G's GUI buttons tend to stick or not respond properly, it's an intermittent problem and not very serious. -Sometimes the bot will not use bold/rapid when you set it to do it, closing the bot and opening it fixes this. That's all I've run into so far, I also found that if you shorten the synth sleep timers there seems to be less liklihood overall that the shift keys will get stuck, it still happens somewhat frequently but it seems less severe than when the timers are at the default. Anyways, keep up the good work, the bot works wonderfully regardless of these minor issues!

Hasty hands has nothing to do with it not finishing the synthesis. In fact nothing but the Finish window has anything to do with the bot not finishing. It sounds like you are not recording the finish window correctly. Make sure it is in the top left corner.

Quote:

Originally Posted by ovusian Just had the most extreme lock-up yet. The program seemed to be holding down some key that I'm not familiar with, it may have been control. I was trying to type in word and the keys would only register upon the taskbar for word. And in firefox when I tried to click a link, it instead downloaded the link instead of directing me. Pressing any of the keys again to clear it did not work. The bot itself refused to force close or even pause. I have all the keys for default and DEL nor END worked. I was also entirely unable to go to start menu and start up taskmgr from the run command because I was unable to type anything in for some reason. Clicking to close out the bot did nothing, same with right clicking the icon in the taskbar in windows and selecting close. What did work was using my controller to override the bot's slower actions and make myself log out. Once that happened the bot realized it couldn't do anything, and then went to idle/deactivate. After that I could type and everything was normal. If it helps, I'm currently using version G.

Where did this happen at when the bot stalled?

This might be happening because I released a 5.4g version of the bot with a faulty bait changer that would keep pressing the "right" arrow when changing bait because of a bug. I fixed it once I realized the bug and reuploaded the same version. It could be the issue.

Quote:

Originally Posted by 13ouncer Hasty hands has nothing to do with it not finishing the synthesis. In fact nothing but the Finish window has anything to do with the bot not finishing. It sounds like you are not recording the finish window correctly. Make sure it is in the top left corner.

I made sure to record it properly, it's in the upper left just as the craft menu is in the upper left. It'll hit finish on everything *but* hasty hand, or the other progression abilities, however if I use a progression ability such as piece by piece or assemble with it not completing the synth the bot works just fine. I'll try recording the finish window again to be sure.

Quote:

Originally Posted by 13ouncer Where did this happen at when the bot stalled? This might be happening because I released a 5.4g version of the bot with a faulty bait changer that would keep pressing the "right" arrow when changing bait because of a bug. I fixed it once I realized the bug and reuploaded the same version. It could be the issue.

I was synthing, and I've redownloaded the G after you reuploaded it too. I ended up going back to version f because G caused the problem again within about an hour's time. Forcing the bot to shut down by it being unable to detect the craft border pixel (by standing up from synthing) fixed the problem both times. The first time I was browsing and typing, the second time I wasn't doing anything and came back to my computer to find it repeating that issue again. I was crafting the same thing, in the same location, since moving back to version F i've not had the problem.

Quote:

Originally Posted by ovusian I was synthing, and I've redownloaded the G after you reuploaded it too. I ended up going back to version f because G caused the problem again within about an hour's time. Forcing the bot to shut down by it being unable to detect the craft border pixel (by standing up from synthing) fixed the problem both times. The first time I was browsing and typing, the second time I wasn't doing anything and came back to my computer to find it repeating that issue again. I was crafting the same thing, in the same location, since moving back to version F i've not had the problem.

You might have to increase the ErrorCount=250 to something like 300-400

If the bot is stopping when standing up that means it the error count is going over 250(2.5 seconds)

What does the edit say when it errors out.

Quote:

Originally Posted by ovusian Personally for me, hasty hand has never worked in older bots. It always stalls out at the finish window then does nothing. I wasn't actually aware the bot could do hasty hand. The same thing happens if you use any of the progression abilities that move the synth forward 30%, if they complete the synth the bot hangs and does nothing even after the finish timer runs out. Quick Bugs: -Version G's GUI buttons tend to stick or not respond properly, it's an intermittent problem and not very serious. -Sometimes the bot will not use bold/rapid when you set it to do it, closing the bot and opening it fixes this. That's all I've run into so far, I also found that if you shorten the synth sleep timers there seems to be less liklihood overall that the shift keys will get stuck, it still happens somewhat frequently but it seems less severe than when the timers are at the default. Anyways, keep up the good work, the bot works wonderfully regardless of these minor issues!

Does this still happen? I thought I had fixed this by clearing all settings when bot closes. Before, after closing the bot, it would not notice that standard was already set in the INI so if you set it to bold it will still do standard.

Okay I found the problem with hasty hand. Fixing it soon.

Okay, fixed. Nice find btw. Thank you.

in regards to post 220.

The G version does the same thing for me. Not sure why. I do know G has an extra timer in it. I needed to add that timer to the end of the synth part of the bot as well as in the front part of the synth in order to make the bot go non stop. my bot looks like this.

2855: Sleep (Random($Sleep_Each_Select_1, $Sleep_Each_Select_2))
2856: ControlSend("[CLASS:RAPTURE]", "", $HWND, "{Enter}")
2857: GUICtrlSetData($Craft_Edit, "Synthesis complete." & @CRLF,1)
2858: $Recipes_Complete = $Recipes_Complete + 1
2859: GUICtrlSetData($Craft_Recipes_Complete, "Recipes completed = " & $Recipes_Complete)
2860: Sleep ($Sleep_Open_Synth)
2861: $Pixel_Error = 0
2862: Exitloop

13ouncer has added the timer to the beginning of the synth bot already in G to accommodate the bot erroring out right as synthesis began on some recipes.
Bot works 100% for me with this one change. I have not tested hasty hands.

Quote:

Originally Posted by Trubass in regards to post 220. The G version does the same thing for me. Not sure why. I do know G has an extra timer in it. I needed to add that timer to the end of the synth part of the bot as well as in the front part of the synth in order to make the bot go non stop. my bot looks like this. 2855: Sleep (Random($Sleep_Each_Select_1, $Sleep_Each_Select_2)) 2856: ControlSend("[CLASS:RAPTURE]", "", $HWND, "{Enter}") 2857: GUICtrlSetData($Craft_Edit, "Synthesis complete." & @CRLF,1) 2858: $Recipes_Complete = $Recipes_Complete + 1 2859: GUICtrlSetData($Craft_Recipes_Complete, "Recipes completed = " & $Recipes_Complete) 2860: Sleep ($Sleep_Open_Synth) 2861: $Pixel_Error = 0 2862: Exitloop 13ouncer has added the timer to the beginning of the synth bot already in G to accommodate the bot erroring out right as synthesis began on some recipes. Bot works 100% for me with this one change. I have not tested hasty hands.

I'
I'll add this to next version.