GPBot
Viele kennen ihn, viele auch nicht, den GPBot. Viele die Ihn benutzen, wollen nichts anderes mehr.
Dies sind einige der Punkte die für ihn sprechen:
- Stabil
- Kompatibel, mit anderen Bots wie Glider
- [fast 100%] Sicher
- für PvP, PvE, zum Farmen & Angeln geeignet
- Kostenlos
Das Problem ist nur: er ist für die Version 3.3.5 nicht mehr erhältlich, außer man kauft sich einen Spender-Status auf der Homepage des Bots.
Daher meine Lösung: Die letzte voll funktionierende Version für 3.3.5a Uploaden!
Download:
*powerd by *
*powerd by *
Videos:
Deutscher Guide:
1. Was brauche ich um GPBot zu nutzen?
Natürlich - wer hätte sichs gedacht - GPBot selbst.
Nebst diesem braucht ihr, um den Bot verwenden zu können, das Microsoft NET Framework. Abhängig von eurem Betriebssystem, sind andere Anforderungen gegeben. Grundsätzlich aber gilt: Die aktuellste Version wird funktionieren.
2. Welche Einstellungen muss ich in verändern?
In World of Warcraft selbst müsst ihr grundsätzlich nur zwei Einstellungen ändern. Zum einen ist es "Mit Klicks bewegen" (eigentlich "Click-To-Move", daher meist als "C-T-M" abgekürzt), zum anderen der "Mit Ziel interagieren"-Shortcut.
Um C-T-M zu aktiveren, müsst ihr ledliglich nach einem Druck auf "ESC" und einem auf "Interface", in den Reiter "Spiel" und daraufhin in die Subkategorie "Maus" wechseln. Dort findet ihr am rechten Fensterrand ein Feld mit der Bezeichnung "Mit Klicks bewegen". Sollte dort kein Häkchen sein, ein einmaliges draufklicken sorgt für das Erscheinen eines eben solchen. Wenn ihr das gemacht habt, sollte das ganze logischerweise aussehen wie folgt:
Das Einstellen des "Mit Ziel interagieren"-Shortcuts ist im Grunde auch nicht anspruchsvoller, man muss nur etwas länger suchen. Man kann sagen dass man die entsprechende Option auf etwa 1/4 oder 1/3 Höhe des gesamten Fensters (bezogen auf den Scrollbalken) findet. Erst einmal gefunden reicht ein Klick auf einen der "Nicht belegt"-Buttons, gefolgt von einem Druck auf die Taste "K" (Standardeinstellung! Solltet ihr diese Einstellung in GPBot geändert haben, oder ändern wollen, so ändert sich das hier natürlich auch)
3. Was muss ich in GPBot einstellen?
Die Reiter "Track" und "Chat" könnt ihr vorerst getrost ignorieren, uns geht es jetzt erstmal um den Reiter "Config". Wenn ihr auf Config klickt, sollte sich euch folgendes Bild zeigen:
1: Solltet ihr den Bot nicht zum angeln verwenden wollen, sondern viel mehr zum hochbotten eures Charakters oder zum Farmen von Erzen und/oder Kräutern, stellt ihr dies einfach auf "Grind".
2: Dort wählt ihr einfach Generic.cs (wie bei mir zu sehen) aus und lasst es gut sein. Lediglich wenn ihr angeln wollt, müsst ihr dies ändern.
3: Die ClassConfig ist mitunter das Herzstück des Bots. Egal ob ihr euren Charakter hochbottet oder ob ihr Erze/Kräuter farmt und dabei auf einen Mob trefft: Die ClassConfig (=CC) bestimmt wie sich euer Charakter im Kampf verhält. Eine eigene CC zu erstellen ist eigentlich nicht schwer, nur zeitaufwendig. Wenn ihr euch eine CC heruntergeladen habt, von der ihr glaubt dass sie euch gefällt, packt sie in den Ordner "Profils" den GPBot zusammen mit ein paar anderen beim Entpacken erstellt hat. Anschließend müsst ihr im Bot nur noch auf "ClassConfig" klicken, müsst in dem Dropdown-Menü die von euch heruntergeladene auswählen und auf "Save" klicken. Danach könnt ihr das Fenster schliessen.
4: Habe ich vergessen einzusetzen. Nicht beachten.
5: Ist wie die nachfolgenden drei Werte selbsterklärend, denke ich. Diese Prozentwert gibt an, ab wie wenig Leben der Bot anfangen soll zu essen. Beispiel: Der Prozentwert liegt bei 10%, euer Charakter hat noch 12% Life. Der Charakter pullt, hat am Ende des Kampfes >10% Leben und fängt dann an zu essen.
6: Bei diesem Prozentwert hört der Charakter auf zu essen, nachdem er unter die bei (5) erklärte Prozentmarke gekommen ist.
7: Siehe (5) und ersetze "Life" bzw. "Leben" mit "Mana".
8: Siehe (5) & (6).
9: Jetzt sind wir zum ersten mal bei etwas angekommen, das für diejenigen die mit dem Bot farmen möchten relevant sind. Hier findet man die Einstellungen, was der Bot denn jetzt genau machen soll. Zum einen empfiehlt sich die Mobs immer zu looten ("Loot Mobs"), zum anderen kann der geneigte Kürschner, den getöteten Mob durch auswählen von "Skinning" auch gleich mit kürschnern. Wer Kräuter abernten möchte, der wählt "Herbing" und wer Erze abernten möchte, der wählt "Mining". Selbstverständlich ist eine doppelte oder dreifache Auswahl möglich.
10: Hier stellt ihr lediglich ein, wie oft der Bot seinen Pfad verlässt, um zu reppen (Standard: 900 Min = 15Std!!), nach wievielen Toden er automatisch zu nem NPC geht um zu reppen, ohne auf das gerade genannte Limit Acht zu geben (Standard: 5) und wieviele Inventarplätze noch frei sein sollen, bevor er zu nem NPC läuft um seine Taschen zu leeren (Standard: -1).
11: Legt fest, wie sich der Bot beim farmen selbst verhält. Click-to-move und Auto-Path müssen auf jeden Fall angehakt werden. Mit Vertical Landing verhält es sich je nach Profil (dazu später mehr) unterschiedlich. Ich hatte Profile, bei denen ich gestorben bin weil der Bot viel zu weit oben abgemountet hat, bei anderen Profilen funktionierts einwandfrei.
Deutsche Anleitung by
Natürlich - wer hätte sichs gedacht - GPBot selbst.
Nebst diesem braucht ihr, um den Bot verwenden zu können, das Microsoft NET Framework. Abhängig von eurem Betriebssystem, sind andere Anforderungen gegeben. Grundsätzlich aber gilt: Die aktuellste Version wird funktionieren.
2. Welche Einstellungen muss ich in verändern?
In World of Warcraft selbst müsst ihr grundsätzlich nur zwei Einstellungen ändern. Zum einen ist es "Mit Klicks bewegen" (eigentlich "Click-To-Move", daher meist als "C-T-M" abgekürzt), zum anderen der "Mit Ziel interagieren"-Shortcut.
Um C-T-M zu aktiveren, müsst ihr ledliglich nach einem Druck auf "ESC" und einem auf "Interface", in den Reiter "Spiel" und daraufhin in die Subkategorie "Maus" wechseln. Dort findet ihr am rechten Fensterrand ein Feld mit der Bezeichnung "Mit Klicks bewegen". Sollte dort kein Häkchen sein, ein einmaliges draufklicken sorgt für das Erscheinen eines eben solchen. Wenn ihr das gemacht habt, sollte das ganze logischerweise aussehen wie folgt:
Das Einstellen des "Mit Ziel interagieren"-Shortcuts ist im Grunde auch nicht anspruchsvoller, man muss nur etwas länger suchen. Man kann sagen dass man die entsprechende Option auf etwa 1/4 oder 1/3 Höhe des gesamten Fensters (bezogen auf den Scrollbalken) findet. Erst einmal gefunden reicht ein Klick auf einen der "Nicht belegt"-Buttons, gefolgt von einem Druck auf die Taste "K" (Standardeinstellung! Solltet ihr diese Einstellung in GPBot geändert haben, oder ändern wollen, so ändert sich das hier natürlich auch)
3. Was muss ich in GPBot einstellen?
Die Reiter "Track" und "Chat" könnt ihr vorerst getrost ignorieren, uns geht es jetzt erstmal um den Reiter "Config". Wenn ihr auf Config klickt, sollte sich euch folgendes Bild zeigen:
1: Solltet ihr den Bot nicht zum angeln verwenden wollen, sondern viel mehr zum hochbotten eures Charakters oder zum Farmen von Erzen und/oder Kräutern, stellt ihr dies einfach auf "Grind".
2: Dort wählt ihr einfach Generic.cs (wie bei mir zu sehen) aus und lasst es gut sein. Lediglich wenn ihr angeln wollt, müsst ihr dies ändern.
3: Die ClassConfig ist mitunter das Herzstück des Bots. Egal ob ihr euren Charakter hochbottet oder ob ihr Erze/Kräuter farmt und dabei auf einen Mob trefft: Die ClassConfig (=CC) bestimmt wie sich euer Charakter im Kampf verhält. Eine eigene CC zu erstellen ist eigentlich nicht schwer, nur zeitaufwendig. Wenn ihr euch eine CC heruntergeladen habt, von der ihr glaubt dass sie euch gefällt, packt sie in den Ordner "Profils" den GPBot zusammen mit ein paar anderen beim Entpacken erstellt hat. Anschließend müsst ihr im Bot nur noch auf "ClassConfig" klicken, müsst in dem Dropdown-Menü die von euch heruntergeladene auswählen und auf "Save" klicken. Danach könnt ihr das Fenster schliessen.
4: Habe ich vergessen einzusetzen. Nicht beachten.
5: Ist wie die nachfolgenden drei Werte selbsterklärend, denke ich. Diese Prozentwert gibt an, ab wie wenig Leben der Bot anfangen soll zu essen. Beispiel: Der Prozentwert liegt bei 10%, euer Charakter hat noch 12% Life. Der Charakter pullt, hat am Ende des Kampfes >10% Leben und fängt dann an zu essen.
6: Bei diesem Prozentwert hört der Charakter auf zu essen, nachdem er unter die bei (5) erklärte Prozentmarke gekommen ist.
7: Siehe (5) und ersetze "Life" bzw. "Leben" mit "Mana".
8: Siehe (5) & (6).
9: Jetzt sind wir zum ersten mal bei etwas angekommen, das für diejenigen die mit dem Bot farmen möchten relevant sind. Hier findet man die Einstellungen, was der Bot denn jetzt genau machen soll. Zum einen empfiehlt sich die Mobs immer zu looten ("Loot Mobs"), zum anderen kann der geneigte Kürschner, den getöteten Mob durch auswählen von "Skinning" auch gleich mit kürschnern. Wer Kräuter abernten möchte, der wählt "Herbing" und wer Erze abernten möchte, der wählt "Mining". Selbstverständlich ist eine doppelte oder dreifache Auswahl möglich.
10: Hier stellt ihr lediglich ein, wie oft der Bot seinen Pfad verlässt, um zu reppen (Standard: 900 Min = 15Std!!), nach wievielen Toden er automatisch zu nem NPC geht um zu reppen, ohne auf das gerade genannte Limit Acht zu geben (Standard: 5) und wieviele Inventarplätze noch frei sein sollen, bevor er zu nem NPC läuft um seine Taschen zu leeren (Standard: -1).
11: Legt fest, wie sich der Bot beim farmen selbst verhält. Click-to-move und Auto-Path müssen auf jeden Fall angehakt werden. Mit Vertical Landing verhält es sich je nach Profil (dazu später mehr) unterschiedlich. Ich hatte Profile, bei denen ich gestorben bin weil der Bot viel zu weit oben abgemountet hat, bei anderen Profilen funktionierts einwandfrei.
Deutsche Anleitung by
English Guide:
Hello & good day!
If you are here, you're probably relatively new to GPBot and hope that this tutorial can provide a little help for using the bot quickly and easily. Well, lucky for you, it will.
FIND THE NEW VERSION HERE
Besides the bot itself, in order to bot properly, you need Microsoft NET Framework. Depending on your operating system, different versions may be needed.
2. What settings should I change in World of Warcraft?
In World of Warcraft you have to change even in principle only two settings. First, "click to move" (CTM), the other one is "interact with target".
In order to activate Click To Move, you must hit Escape to get to the options menue. From there, click on "Interface," and navigate to "Mouse." On the right hand side of the window, you will find a box labled "Click to Move." This box should be clicked OFF by default. Click it once so that a check appears in it, then exit out of the menue and right click once on the ground in order to correctly activate Click-To-Move mode. Correctly applied, it should look like this:
It isn't hard to find the "Interact with Target" button, we just have to look a little longer. Go to Keybinds and scroll one third to one quarter of the way down. When you find it, set it to K. (That is what GPbot uses by default. You can set it to something else in GPbot if you like your K button doing what it does).
3. What settings should I change in GPBot?
You can ignore the "Track" and "Chat" tabs for now. All that we care about is "Config". When you are in the Config tab, it should look something like this:
1: If you want to use the bot to fish, set it to fishing. If you want to mine, herb, skin, or level, select "Grind".
2: Here, you should just use Generic.cs (as pictured), unless you want to fish, in which case, Fishing.cs is what you want.
3: ClassConfig is the heart of the bot. It's what you use for leveling your character, farming ores, herbs, skins, or whatever else you make the bot do. Class configs determine how your character acts in combat. Creating a new classconfig is pretty easy, it just takes time. Since the goal of this tutorial is to get GP up and running in a minimal amount of time, you should look for a premade CC in the forums (CLICK ME!). Download the CC, and move it into the Whatever:\\Programs\GP\Classes\GenericClass folder. To set the ClassConfig that you want to use, click the "Class Config" button and select it from the drop down menue.
4: I forgot to use this number. Skip it.
5-8: I believe that numbers 5-8 are self explanatory. How this works is that if your character is below the % of health in #5, it will begin to eat until it reaches the % of health in #6. It works the same for drinking with 7 and 8.
is 10%, your character has 12% of Life. The character pulls has, at the end of the fight> 10% life and then begins to eat.
9: Important stuff is here. This decides what things the bot will try to do. You can set it to Loot Mobs, Skin mobs, Mine nodes, and herb. You can select however many you want, however, only two of the three professions (Skin, Mine, Herb) will work. [Yeah yeah, common knowledge: it isn't so common]
10: This is when the bot will follow the vendor path to repair at. The default is 900 minutes, or 15 hours. You may want to change this. It also has a number of times you die before it will repair (Default is 5), and an inventory slots left option (Default is -1, which means it won't sell even if your bags are full).
11: Defines how the bot behaves while moving. Click-to-move and Auto-Path must be checked [You can turn off Auto-Path if you are using converted Glider profiles]. Vertical landing means that it will position your character directly over any nodes (assuming you are using flying mounts) and move directly down to the node. Skip Gathering means that if another player is near you, it will ignore nearby nodes.
12: I would suggest that you have auto-dismount on gather checked, and Dismount on Agro not checked. "Enemy Dist to mount" is a bit badly named. What it means is, if you are within X meters of your next node, herb, or enemy of an attack-listed faction, it will NOT mount up, and will run by foot to that node, herb, or enemy. I would suggest that you have this very low, as having it higher can cause nodes to become blacklisted, if you are in a hilly area.
Credits go to
If you are here, you're probably relatively new to GPBot and hope that this tutorial can provide a little help for using the bot quickly and easily. Well, lucky for you, it will.
FIND THE NEW VERSION HERE
Besides the bot itself, in order to bot properly, you need Microsoft NET Framework. Depending on your operating system, different versions may be needed.
2. What settings should I change in World of Warcraft?
In World of Warcraft you have to change even in principle only two settings. First, "click to move" (CTM), the other one is "interact with target".
In order to activate Click To Move, you must hit Escape to get to the options menue. From there, click on "Interface," and navigate to "Mouse." On the right hand side of the window, you will find a box labled "Click to Move." This box should be clicked OFF by default. Click it once so that a check appears in it, then exit out of the menue and right click once on the ground in order to correctly activate Click-To-Move mode. Correctly applied, it should look like this:
It isn't hard to find the "Interact with Target" button, we just have to look a little longer. Go to Keybinds and scroll one third to one quarter of the way down. When you find it, set it to K. (That is what GPbot uses by default. You can set it to something else in GPbot if you like your K button doing what it does).
3. What settings should I change in GPBot?
You can ignore the "Track" and "Chat" tabs for now. All that we care about is "Config". When you are in the Config tab, it should look something like this:
1: If you want to use the bot to fish, set it to fishing. If you want to mine, herb, skin, or level, select "Grind".
2: Here, you should just use Generic.cs (as pictured), unless you want to fish, in which case, Fishing.cs is what you want.
3: ClassConfig is the heart of the bot. It's what you use for leveling your character, farming ores, herbs, skins, or whatever else you make the bot do. Class configs determine how your character acts in combat. Creating a new classconfig is pretty easy, it just takes time. Since the goal of this tutorial is to get GP up and running in a minimal amount of time, you should look for a premade CC in the forums (CLICK ME!). Download the CC, and move it into the Whatever:\\Programs\GP\Classes\GenericClass folder. To set the ClassConfig that you want to use, click the "Class Config" button and select it from the drop down menue.
4: I forgot to use this number. Skip it.
5-8: I believe that numbers 5-8 are self explanatory. How this works is that if your character is below the % of health in #5, it will begin to eat until it reaches the % of health in #6. It works the same for drinking with 7 and 8.
is 10%, your character has 12% of Life. The character pulls has, at the end of the fight> 10% life and then begins to eat.
9: Important stuff is here. This decides what things the bot will try to do. You can set it to Loot Mobs, Skin mobs, Mine nodes, and herb. You can select however many you want, however, only two of the three professions (Skin, Mine, Herb) will work. [Yeah yeah, common knowledge: it isn't so common]
10: This is when the bot will follow the vendor path to repair at. The default is 900 minutes, or 15 hours. You may want to change this. It also has a number of times you die before it will repair (Default is 5), and an inventory slots left option (Default is -1, which means it won't sell even if your bags are full).
11: Defines how the bot behaves while moving. Click-to-move and Auto-Path must be checked [You can turn off Auto-Path if you are using converted Glider profiles]. Vertical landing means that it will position your character directly over any nodes (assuming you are using flying mounts) and move directly down to the node. Skip Gathering means that if another player is near you, it will ignore nearby nodes.
12: I would suggest that you have auto-dismount on gather checked, and Dismount on Agro not checked. "Enemy Dist to mount" is a bit badly named. What it means is, if you are within X meters of your next node, herb, or enemy of an attack-listed faction, it will NOT mount up, and will run by foot to that node, herb, or enemy. I would suggest that you have this very low, as having it higher can cause nodes to become blacklisted, if you are in a hilly area.
Credits go to
Hier das FAQ, beachtet besonders den Punkt unter General(den Launcher als Admin ausführen):
GPBot FAQ - READ BEFORE POSTING NEW THREAD
I'm attempting to compile all frequently-asked questions here so that new users can have a single place to solve most of their common problems. I will try to update this with more questions and answers over time.
Technical
Q. I get an error when I try to start GPBot!
A-1.Makes sure you have installed .NET Framework.
If you are running Windows XP or Vista, you need .NET Framework 3.5 SP1.
If you are running Windows Windows 7, you need .NET Framework 4.0 Beta.
General
Q. My "Run Bot" button stay grey!
A-1.GPBot works only with the last WoW version. If you are not playing with last WoW version, this button still gray and you can not use GPBot.
A-2.Run the GPBot.exe as Admin.
Q.Where can I find the latest bot version?
A-1. The latest one for non donors is located [Only registered and activated users can see links. ]
A-2.For the donors (the latest version might be in the A-1) is located in the donors private forum.
Movement
Q. My character doesn't follow the path in the profile!
A. If you are using a flying mount (eg. for herbing or mining) you must have 'Click to Move' enabled both in-game and on the 'General' tab of GPBot. With 'Click to Move' enabled, always do one manual click to move your character before starting the bot.
Turning on 'Auto Path' may also help.
Q. Why won't my character loot?
Make sure your in-game key binding for 'Interact with Target' matches the key on the 'Config -> Keys' tab in GPBot.
Combat/Gathering
Q. Why won't my character attack any monsters?
A. Make sure the monster's faction is added to the profile. You can do this by targeting the mob in-game and pressing the 'faction' button on the 'profile' tab of GPBot.
Q. Why does my character stand still 'resting' instead of eating food?
A. Make sure your food/water is on a hotbar, and specified as Common.Eat/Common.Drink in your class config.
Q. Why doesn't my character gather from a node?
A. Make sure 'Click to Move' is enabled in the game and on GPBot.
Q. Why is my Rogue/Warrior/DK resting for mana?
A. Check the 'PowerType' in your class config. Rogues -> "energy", Warriors -> "rage", DK -> "runicpower".
Q. Why does my melee class run away from the monster?
A. Check your 'FightDistance' and 'MinCombatDistance' in your class config. It should be around 5 for melee classes.
Profiles
Q. Why isn't my path showing up on GPBot when I load my profile?
A. Open the profile in Notepad (or similar) and replace all commas (,) with full stops (.) eg. x="1921,459" -> x="1921.459
Q. Can I use Glider profiles with GPBot?
A. Yes, but only ones that do not use a flying mount. They need to be converted using THIS tool.
I'm attempting to compile all frequently-asked questions here so that new users can have a single place to solve most of their common problems. I will try to update this with more questions and answers over time.
Technical
Q. I get an error when I try to start GPBot!
A-1.Makes sure you have installed .NET Framework.
If you are running Windows XP or Vista, you need .NET Framework 3.5 SP1.
If you are running Windows Windows 7, you need .NET Framework 4.0 Beta.
General
Q. My "Run Bot" button stay grey!
A-1.GPBot works only with the last WoW version. If you are not playing with last WoW version, this button still gray and you can not use GPBot.
A-2.Run the GPBot.exe as Admin.
Q.Where can I find the latest bot version?
A-1. The latest one for non donors is located [Only registered and activated users can see links. ]
A-2.For the donors (the latest version might be in the A-1) is located in the donors private forum.
Movement
Q. My character doesn't follow the path in the profile!
A. If you are using a flying mount (eg. for herbing or mining) you must have 'Click to Move' enabled both in-game and on the 'General' tab of GPBot. With 'Click to Move' enabled, always do one manual click to move your character before starting the bot.
Turning on 'Auto Path' may also help.
Q. Why won't my character loot?
Make sure your in-game key binding for 'Interact with Target' matches the key on the 'Config -> Keys' tab in GPBot.
Combat/Gathering
Q. Why won't my character attack any monsters?
A. Make sure the monster's faction is added to the profile. You can do this by targeting the mob in-game and pressing the 'faction' button on the 'profile' tab of GPBot.
Q. Why does my character stand still 'resting' instead of eating food?
A. Make sure your food/water is on a hotbar, and specified as Common.Eat/Common.Drink in your class config.
Q. Why doesn't my character gather from a node?
A. Make sure 'Click to Move' is enabled in the game and on GPBot.
Q. Why is my Rogue/Warrior/DK resting for mana?
A. Check the 'PowerType' in your class config. Rogues -> "energy", Warriors -> "rage", DK -> "runicpower".
Q. Why does my melee class run away from the monster?
A. Check your 'FightDistance' and 'MinCombatDistance' in your class config. It should be around 5 for melee classes.
Profiles
Q. Why isn't my path showing up on GPBot when I load my profile?
A. Open the profile in Notepad (or similar) and replace all commas (,) with full stops (.) eg. x="1921,459" -> x="1921.459
Q. Can I use Glider profiles with GPBot?
A. Yes, but only ones that do not use a flying mount. They need to be converted using THIS tool.
Homepage der Hersteller:
HF
Hab grad noch dran gedacht:
Wenn ihr trotzdem Virenfunde erhalten solltet, bitte diesen Post lesen:
(nicht zu verwechseln mit "Atomkraft- nein nein!")
Updates/Edits:
21.06.12: Ich wurde von , einem Member des GPBot Teams, darauf hingewiesen, das er und sein Team keinen Support für diese GPBot-Version geben werden. Wenn ihr jedoch Fragen zu aktuellen Versionen habt könnt ihr euch sicherlich bei ihm melden. Außerdem sei hervorzuheben, dass ich nicht in Kontakt it seinem Team stehe, da es da scheinbar Missverständnisse gab.