|
edxSilkroadLoader_Lite Beta 3
1 Attachment(s)
About:
This is the third iteration of the edxSilkroadLoader_Lite project. This version aims to fix a few bugs and add some important missing functionality (not Silkroad features!). Please see the "Updates" section for changes. In addition, this thread has a FAQ section for common problems, so please check there first before asking for help. In addition, the edxKRCaptchaGen tool has been included in this release. This tool allows for an "English" version of the Korean captcha to be entered for users who does not wish to have to switch their computer locale to Korean and enter Korean text. If you are fine using that method, this tool is not for you then! Compatibility: ISRO - Fully supported. Unpacked clients are no longer required. KSRO - Fully supported. Unpacked clients are no longer required. Note: Korean locale has to be set on your PC to enter the Korean captcha. However, to get around this, you may use the included edxKRCaptchaGen program for English based captcha. CSRO - Not supported. As of October 29th, CSRO's client based protection detects the edxSilkroadLoader and disconnects you from the server. This is true of version 2 and 3 of the loader and has nothing to do with any updates to the loader itself. TSRO - Not supported. As of September 10th, TSRO has blocked all foreign IPs. VSRO - Not supported. VSRO uses XTrap, which prevents the loader from working correctly. JSRO - Not supported. JSRO has blocked all foreign IPs. JSRO uses GameGuard, which prevents the loader from working correctly. You must always update via Silkroad.exe to the latest version before using the loader. Please remember to do this on your Silkroad version's patch day! edxSilkroadLoader Instructions: Step 1. Download and extract the "edxSilkroadLoader_Lite_Beta3.zip" package. You may run it from anywhere you wish. Step 2. Run "edxSilkroadLoader_Lite.exe". Note: If you run the loader while you are updating a Silkroad version, that version will fail to load and it will be removed from the loader. Wait until it updates and add it again if that happens. [Only registered and activated users can see links. Click Here To Register...] Step 3. Click "Add" under Silkroad Directories. Navigate to your Silkroad directory and select your "sro_client.exe" file. Note: it's ok if you select any file as long as it's in the Silkroad directory! Repeat this step for all your Silkroad versions. [Only registered and activated users can see links. Click Here To Register...] Step 4. Choose the Silkroad directory you wish to use. Next select the desired Division server, and then the Login server to connect to. Click Launch! [Only registered and activated users can see links. Click Here To Register...] Step 5. Wait until the new dialog "Configure patches..." appears. Configure your patches for this particular client. These settings will be automatically saved for this specific Silkroad version. [Only registered and activated users can see links. Click Here To Register...] Step 6. Click "Start!" to run the client or "Terminate" to exit the client. Please wait up to a few minutes for the first client to actually start. If no client actually runs after 3 minutes, your antivirus/security programs have blocked the DLL.You will need to add the loader and the DLL to your safe file list! Step 7. Repeat Steps 4-6 for each client you wish to run. You may close the loader at any time you wish or just leave it open. edxSilkroadLoader Updates:
edxSilkroadLoader FAQs: Q. I have a problem, can you help me solve it? Q. Yes! Please read the FAQs over first. If your problem is not solved please include information about which Silkroad version you are trying to run as well as what O/S you are using and as much detail about your problem as possible! Q. I Get C7 Error on KSRO when using the English Patch? A. [Only registered and activated users can see links. Click Here To Register...] Q. I get Account already connected when using CSRO? A. The CID is in use. Please see this page: [Only registered and activated users can see links. Click Here To Register...] Q. I keep on getting the error: Quote:
A. Run Silkroad.exe to update Silkroad since there was an update. Q. I keep on getting the error: Quote:
A. If you redirect the IP/Port, the program you are redirecting to is not configured correctly. If you are not redirecting, the Silkroad server you are trying to connect to is inaccessible. Try loading via Silkroad.exe to see if there is an inspection. If there is no inspection, try another login server in the loader. If that fails, make sure you do not have any host file modifications or other programs interfering with the Silkroad addresses (such as Peer Guardian) Q. I get the ??? error when starting the client? A. This usually means you are using a modified client that is not compatible with the loader or you are trying to start a Silkroad version that must use the English patch to start. Try starting the game using Silkroad.exe and see if it works. If it does not, then try reinstalling. If it does, make sure you are using the original client. Finally, try removing some patches to see if there is one specific patch that is causing problems. Q. XTrap / Gameguard fail to start when using the loader. A. This loader is not compatible with VSRO and JSRO, sorry! Q. I can only connect 5 clients to KSRO before getting the IP limit error? A. KSRO implements a lower connection count to their world servers than ISRO does. You will need to use a proxy to connect more clients. Q. Multiclient does not work? A. Place a check in the "Debug Console" to make sure there are no reported errors. If there are not, it is possible your PC is blocking the DLL. Antivirus and Antimalware programs can block the DLL, so you will need to add the edxSilkroadLoader files to a "safe list". Q. Why is the server list not in English? A. The server list comes as a packet to the client. This means you have to enable the correct locale for your Silkroad version to see it in the correct language first, then compare those characters to the English translations. Q. Will you still post unpacked clients to the thread? A. No. You may refer to this thread if you need an unpacked client: [Only registered and activated users can see links. Click Here To Register...] Q. Will you add more features to the loader? A. I do not have any plans to add more features to this specific loader. The purpose of this "lite" loader is to have a simple loader that offers a good minimal set of features that requires no maintenance. Q. Will I get a ban using this loader? A. If you are using CSRO, it is possible. However, no CSRO users have reported getting banned from using this loader. If you are using ISRO, no, as long as you are using the latest client. If you used an outdated client, you will send bad packets and get banned! For all other versions, no, Silkroad does not have the means to detect the loader. Q. Where can I download the edxSilkroadLoader_Lite Beta 3 package from? A. You must login to epvp to see the attached files! It is not uploaded anywhere else. edxKRCaptchaGen Instructions: Step 1. Run edxKRCaptchaGen.exe once. Minimize the window until you need it. Step 2. Start a KSRO client via edxSilkroadLoader_Lite and make sure to have checked the "Use edxKRCaptchGen" option. Step 3. Login to KSRO so you have the CAPTCHA on screen. If you get a C7 error, please look at the "edxSilkroadLoader FAQs" for the solution. Step 4. Restore the edxKRCaptchGen tool and follow the directions to generate the image code text required. [Only registered and activated users can see links. Click Here To Register...] edxKRCaptchaGen FAQs: Q. Where can I download the edxKRCaptchaGen.exe program? A. It is included in the edxSilkroadLoader_Lite Beta 3 package, attached to this thread. Q. What do I use for the 'Trail' character? A. Ignore the 'Trail' character since KSRO CAPTCHAs do not make use of them as far as I can tell. Leave it as 0 always so you do not mess up the image code calculation. Q. I can't find a symbol to enter? A. If you do not see a character that you need to enter, then you are looking for the wrong character! The characters follow the format of Lead Vowel Tail, so try your best. I have had a few that I couldn't get right, but that's how it is when you don't fully understand a language. Q. The KSRO image code fails for me when using the string from edxKRCaptchaGen? A. First, make sure you are actually using the "edxSilkroadLoader_Lite Beta 3" loader. Second, make sure you have placed a check in the "Use edxKRCaptchaGen" chexbox. Third, make sure you have the Korean language installed on your OS. It does not have to be active, but it needs to be installed! Fourth, keep trying the image code, it takes a bit of practice and patience! [Only registered and activated users can see links. Click Here To Register...] Please feel free to leave any questions or comments! This is still a "beta" program, but I hope to have ironed out most of the bugs in my preliminary testing. Since new code has been added though, the testing cycle has to be restarted. Enjoy! :) |
Did u have a look on mbot? it hax an built in tranlsation (csro) including server translation. is that possible to adapt? maybe ask bheaven, here on epvpers...
nice work as always ;) |
would you be able to add support for ThaiSRO?(black rogue)?
so we can read the gui instead of having thai letters lol ^^ just in case you can... here is a zip with the client, the sv.t and the divisioninfo. [Only registered and activated users can see links. Click Here To Register...] |
Hey ! Could u help me? I play VSRO.
If u do not have time, could u show me how to bypass or multi xtrap? Thanks too much! |
Quote:
This version's main goals were to figure out a way to implement support for packed and unpacked clients and rework my address calculation logic from memory rather than file. Both of these concepts are very useful in practice for my generic tool set. That's how I determine what goes into my projects, if it's something that I can reuse or something I've not tried yet and don't know how it works, I'll probably look into it. Quote:
Quote:
|
Quote:
i know you dont have time. but this would be a great tutorial. maybe a small guide on how xtrap detects client changes. and how it could be possible to make it not detect these changes. i got some small things researching on xtrap, but nothing very usefull. its hard. a few threads and different processes. also code modifications of silkroad. all i got was a proxy ;-) and AFAIK csro has also a client protection but your loader supports csro. could you tell what the protection looked like and how to bypass it? best regards and congratulations to your work (didnt thought it was possible to support packet clients ;-) ) |
@recking:
i'm using packets to translate the servernames since they are not available from the pk2 and the client utilizses the names which are sent in every serverlisting. @vdung214: check this topic for a xtrap bypass (dont know if it works; found it by accident) [Only registered and activated users can see links. Click Here To Register...] |
edxSilkroadLoader_Beta3_update1
1 Attachment(s)
Here is an updated version that adds support for THSRO and the majority of the code required for RSRO. I had to rewrite the English Patch a bit, but it should work fine now. I also fixed a few bugs elsewhere that were causing a crash with this set of PK2 files. I've tested up to the login screen, but can't login to test further, but since all the patches are found without any problems, it should work fine. There is no mutex check in THSRO, so that patch will show an error in the console.
I should also mention that this loader should work fine with all the other versions as well. However, those other clients will always trigger the RSRO and THSRO English Patch errors, but it does not affect the operation of the loader. If you use this version and have something to report, please make sure to mention it's this version rather than the first one posted. [Only registered and activated users can see links. Click Here To Register...] |
Drew, this loader is just awesome!
It's the best loader I've ever seen. :) |
good man thx for you
|
I haven't test it yet..
But it will nice if it can rename client to "SRO_Client [nickname]" :) thats my little suggestion |
shouldnt it be sticky???
|
For some reason I can't use AppLocale with this version. The korean letters show up as weird symbols and when I try to write the Captcha it comes up in squares.
This didn't happen to me in version 2. |
#sticky
|
1 Attachment(s)
Quote:
There's only two main difference between version 2 and 3 that could possibly affect that I believe. First, version 3 was compiled on XP rather than Windows 7. Second, I set the Loader project to require Administrator via the manifest settings. The bug fixes in version 3 and code changes would not affect that, since AppLocale has more to do with system/application settings rather than application specific logic. First, try [Only registered and activated users can see links. Click Here To Register...] which was compiled in Windows 7 and sets the Loader manifest to require Administrator. If AppLocale fails on that, than it means the requires admin might be interfering with it. If that version gets the same results, then you can try the attached version, which is the updated loader compiled in Windows 7 and has no admin privileges required on the loader. If that version fails too, then there's nothing I can do since the updated code uses the version 2 project, I just fixed a few code bugs and updated the logic for the English patch. If neither of those fixes the problem, my last guess then would be there was a Windows update in the past month that affected Visual Studio that would cause the application to behave differently in regards to AppLocale. In that case, there would be no solution on my side. |
thx and the best thing is that it save settings
(in old version i had to uncheck english patch each time) great job |
thank you
|
Since today the loader create a problem in cSRO. I got dc after 10-30 sec ingame.
|
Yes i got DC after 10 sec. I play in cSro
|
same here i get DC after every 10 sec.
|
Please fix this error.
|
|
Sorry guys, CSRO has updated their security system to detect the loader now. Using either version 2 or 3 will result in a disconnection. That means CSRO can no longer be supported, which takes the support games down to KSRO and ISRO now with preliminary unofficial support for Black Rogue.
Quote:
|
please try to fix it
i am crying i cant play with one chaaaaaaaaaaaaaaaaarrrrrrrrrrrrrrrrrrrrr |
Oh cSro not work ever?
|
Quote:
For example, if you start CSRO only using the Debug Console option or no options, you will notice you never DC. Likewise, if you run CSRO from OllyDbg and have no breakpoints, the game will work fine. However, as soon as you use a client modification or set a breakpoint in Olly (which does alter memory), you will get a disconnect the next time the memory check runs (about 10-15 sec). From what I understand about the problem, the only solution I can think of would be to write my own system driver (think like a rootkit) to fight their protection and implement my loader patches that way. However, that is not something I've done before, and it's not something that is simple or easy if you have never done it before, so there is nothing I can do for CSRO in regards to this project. I do plan on eventually learning the ins and outs of system drivers and working in Ring 0 to make undetectable hacks, but it's outside my current domain of knowledge at this time. That's why CSRO is no longer supported and there's nothing I can do for you guys at this point. |
Is the Xtrap protection on your radar? :)
|
Quote:
Up until now, I've just simply avoided games that used active third party protections and really just steered away from getting into anything that requires a kernel level driver to work successfully. However, the more games I see coming out and even existing games going from unprotected to protected, if I want to continue in this field, I have to learn the skills to work around those things in the next level. So, I am going to begin learning the tricks of the trade for kernel level drivers and being able to operate on that level, but I won't be able to apply that work towards Silkroad in practice in the short term. I mean, I don't foresee myself being able to spend a month with it and just be able to defeat XTrap and the CSRO protection right away, so it might take some time, but that's the direction I will be going in. That means I don't think I'll have anything to really show for the next couple of months or so while learning it all, but I do hope to eventually learn the skills necessary to make the updates needed to get around these protections, for Silkroad and other games. I definitely have the time, motivation, and desire to do it, so it's just a matter of me getting it done like everything else I have up until this point, and then putting it all together. :) |
THsro can't pass(skip) Silk road Guard but nude/zoom it work :'(
|
When i log in after max 30 min i get dc with the new loader why ?
|
Quote:
Code:
-- Code --Quote:
|
thx pushedx, but my nuconnector stuck at " listening for sro_client.exe " what happend i think loader can't pass SRO guard system
|
Quote:
|
Hello , I have a little problem.
When I enter in kSRO , I put my account and password , press enter and it show me that image of security , but characters are in korean so I use edxKRCaptchaGen.exe But in picture there are others characters that isn't appear on edxKRCaptchaGen.exe I try to enter with edxKRCaptchaGen.exe 9 times = 9 times failed. There's another solution ? |
yeah good work ;)!
|
NOT WORK !!!
|
i have a same problem of sandu121. =X
I do everything right as in the tutorial, and when i will generate the codes from captcha only appears "00 00 00 00 00 00" in the box [Only registered and activated users can see links. Click Here To Register...] |
MC NOT WORK WHY !
|
Quote:
well I explain again. I enter in edxKRCaptchaGen.exe minimize than connect to kSRO , I enter in game than I complete account/password and press ok... Than it appear the secuirty code who's in korean characters , than i look on edxKRCaptchaGen.exe to find the characters , but... there are some characters who aren't in edxKRCaptchaGen.exe , and sometime I put the correct code and again problem ( it's because the image code is strange , I mean that I can't see exactly letters ) |
1 Attachment(s)
Quote:
Quote:
Look inside the "edxSilkroadLoader_Beta3\screenshots" folder for more hints and visuals that I made to help you enter the captcha. Remember it is not easy and it does take time, so don't expect to be able to enter it always easily. Sometimes you get really hard ones and other times you get really easy ones. Lastly, make sure you have placed a checkbox in the "Use edxKRCaptchaGen" on the "Configure patches..." dialog when you launch KSRO. If you don't the image code will fail every time! Quote:
Considering ISRO and KSRO are the only two left, with the probability ISRO will lose support if they add HackShield, this loader will soon be too "outdated" to use in its current state anymore. As my previous post mentioned, it will take some time to come up with a new version that uses a driver to hide it, since drivers work differently in Xp/Vista/Win7, there's a lot to learn. Quote:
|
| All times are GMT +2. The time now is 21:21. |
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.