<<< Step 1 >>> ( install microsoft loopback )
Microsfot loopback:The Microsoft Loopback adapter is a testing tool for a virtual network environment where network access is not available.
Also, you must use the Loopback adapter if there are conflicts with a network adapter or with a network adapter driver. You can bind network
clients, protocols, and other network configuration items to the Loopback adapter, and you can install the network adapter driver or network
adapter later while retaining the network configuration information.
1. Click Start, and then click Control Panel. Because this is XP, you may have it set up this way, or you may have your interface set up in
Classic view. Either way, navigate your way to ?Add Hardware?, or ?Printers and Other Hardware?
2. Launch the Wizard to Add Hardware to your system. Do not be confused because you are not actually installing any new hardware, just simply
adding a ?network adapter? which is acting as a virtual adapter.
3. Click next, once you have launched the Wizard. You will see a series of dialog boxes open to ask you about scanning for hardware changes,
etc ? you will want to do everything manually in this exercise. There will be no automatic scanning for any reason because you have not
installed anything, the installation will immediately fail.
4. You will next be asked if the hardware is connected. You can select Yes from the options and click Next.
5. Now, select *from the bottom of the list* the ?Add a new hardware device? option, and then click Next.
6. Click Install the hardware that I manually select from a list, and then click Next.
7. Select ?Network adapters? from the Common hardware types section within the dialog box. Click Next.
8. Select Microsoft and then the Microsoft Loopback Adapater, and then click Next.
Lastly, you will be prompted to Finish up the installation.
<<< Step 2 >>> ( apply the ip to the loopback adapter)
go into your network connections, one of them should be the microsoft loopback. Although it wont be named microsoft loopback, it still will
be there. Mine was named "Local Area Connection 2".
right click that and select properties. On this screen select "internet protocol" and then properties. Click "Use The Following IP Address"
change the settings to
IP Address: 220.76.12.2
Subnet Mask: 255.255.255.0
Click Ok.
<<< Step 3 >>> ( Editing the hosts file )
The path to the "hosts" file: C:\WINDOWS\system32\drivers\ec t\hosts
Open it, it will propmt for how to open it. Choose "Select the program fom a list".
Find either Wordpad or notepad.
Add these two lines to the file:
127.0.0.1 localhost
220.76.12.2 L2authd.Lineage2.com
so that your final hosts file looks like this
Code:
# Copyright © 1993-1999 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # * * *102.54.94.97 * * rhino.acme.com * * * * *# source server # * * * 38.25.63.10 * * x.acme.com * * * * * * *# x client host 127.0.0.1 localhost 220.76.12.2 L2authd.Lineage2.com
Open your TCP Tunnel or if you dont have one download it here:
Open Portforward.bat
<<< Step 5 >>> ( Downloading and using WPE )
Mirror:
or
Double click on Filter 1 and fill in as the picture shows:
Make sure that "advanced" and "from the position of the chain found" are both checked.
Top: 00 2B 02 00 00
Bottom: 00 29 02 00 00
((( those packets there are diferent from the ones specified before so if you have already done this with WPE you will have to do it again
)))
WPE fixes this:
19:47:53 »¶ÓʹÓÃÐÐÕß¡£Ö÷Ò³ Link LoginServer Succeed.
19:47:57 Login LoginServer Succeed.
19:48:02 Link GameServer Succeed.
19:48:02 ->Login GameServer Fail.
Click Apply, Check filter 1 or w/e you named it and then click ON.
Click Target Program and select L2waler 10.4.8
Official Download for Newest English Version 10.4.8:
(11,195,822 bytes)
(2,996,097 bytes)
Login to L2walker.
You may now close WPE if you need to login to the real game. WPE is only used to verify l2walker.